- 필수 기능
- 시작하기
- Glossary
- 표준 속성
- Guides
- Agent
- 통합
- 개방형텔레메트리
- 개발자
- API
- Datadog Mobile App
- CoScreen
- Cloudcraft
- 앱 내
- 서비스 관리
- 인프라스트럭처
- 애플리케이션 성능
- APM
- Continuous Profiler
- 스팬 시각화
- 데이터 스트림 모니터링
- 데이터 작업 모니터링
- 디지털 경험
- 소프트웨어 제공
- 보안
- AI Observability
- 로그 관리
- 관리
Supported OS
Pure Storage FlashArray Dashboard - Overview (Top)
Pure Storage FlashArray Dashboard - Overview (Middle)
Pure Storage FlashArray Dashboard - Overview (Bottom)
This check monitors the Pure Storage FlashArray through the Datadog Agent and the Pure Storage OpenMetrics exporter.
The integration can provide performance data at the array, host, volume and pod level, as well as high-level capacity and configuration information.
You can monitor multiple FlashArrays and aggregate these into a single dashboard, or group them together by customer defined environment.
This integration requires the following:
Follow the instructions below to install and configure this check for an Agent running on a host. For containerized environments, see the Autodiscovery Integration Templates for guidance on applying these instructions.
To configure this check for an Agent running on a host, run sudo -u dd-agent -- datadog-agent integration install -t datadog-purefa==<INTEGRATION_VERSION>
.
Note: <INTEGRATION_VERSION>
can be found within the CHANGELOG.md for Datadog Integration Extras.
sudo -u dd-agent -- datadog-agent integration install -t datadog-purefa==1.2.0
purefa.d/conf.yaml
file, in the conf.d/
folder at the root of your Agent’s configuration directory to start collecting your PureFA performance data. See the sample purefa.d/conf.yaml for all available configuration options.Note: The /array
endpoint is required as an absolute minimum when creating your configuration file.
init_config:
timeout: 60
instances:
- openmetrics_endpoint: http://<exporter_ip_or_fqdn>:<port>/metrics/array?endpoint=<array_ip_or_fqdn>
tags:
- env:<env>
- fa_array_name:<full_fqdn>
- host:<full_fqdn>
headers:
Authorization: Bearer <api_token>
min_collection_interval: 120
- openmetrics_endpoint: http://<exporter_ip_or_fqdn>:<port>/metrics/volumes?endpoint=<array_ip_or_fqdn>
tags:
- env:<env>
- fa_array_name:<full_fqdn>
headers:
Authorization: Bearer <api_token>
min_collection_interval: 120
- openmetrics_endpoint: http://<exporter_ip_or_fqdn>:<port>/metrics/hosts?endpoint=<array_ip_or_fqdn>
tags:
- env:<env>
- fa_array_name:<full_fqdn>
headers:
Authorization: Bearer <api_token>
min_collection_interval: 120
- openmetrics_endpoint: http://<exporter_ip_or_fqdn>:<port>/metrics/pods?endpoint=<array_ip_or_fqdn>
tags:
- env:<env>
- fa_array_name:<full_fqdn>
- host:<full_fqdn>
headers:
Authorization: Bearer <api_token>
min_collection_interval: 120
- openmetrics_endpoint: http://<exporter_ip_or_fqdn>:<port>/metrics/directories?endpoint=<array_ip_or_fqdn>
tags:
- env:<env>
- fa_array_name:<full_fqdn>
- host:<full_fqdn>
headers:
Authorization: Bearer <api_token>
min_collection_interval: 120
Run the Agent’s status subcommand and look for purefa
under the Checks section.
1.1.x supports both the Pure Storage OpenMetrics exporter and the deprecated Pure Storage Prometheus exporter.
The dashboard for the deprecated Pure Storage Prometheus exporter has been renamed to Pure FlashArray - Overview (Legacy Exporter)
.
A listing of metrics that are both shared and unique to the different exporters are listed in metrics.py. You may need to update your dashboards and/or your alerts to match the new metric names when migrating from the Pure Storage Prometheus exporter to the Pure Storage OpenMetrics exporter. Please contact Pure Storage with the information in the Support tab if you have any questions.
When migrating from Pure Storage Prometheus exporter to the Pure Storage OpenMetrics exporter, the endpoints no longer have /flasharray
in the endpoint URI.
In future versions of the PureFA Agent Check, the metric names from the Pure Storage Prometheus exporter will be removed.
The dashboards included in this integration use the tags env
, and fa_array_name
. Make sure that these are set per instance. host
must also be set for the /array
and /pods
endpoints in purefa.d/conf.yaml
.
- tags:
- env:<env>
- fa_array_name:<full_fqdn>
- host:<full_fqdn>
The Pure Storage FlashArray check sets min_collection_interval
to 120
by default, and the minimum recommended value is 20
. You may increase/decrease min_collection_interval
in the purefa.d/conf.yaml
file if necessary:
min_collection_interval: 120
purefa.alerts.open (gauge) | FlashArray open alert events. |
purefa.alerts.total (gauge) | (Legacy) Number of alert events. |
purefa.array.performance_average_bytes (gauge) | FlashArray array average operations size in bytes. Shown as byte |
purefa.array.performance_avg_block_bytes (gauge) | (Legacy) FlashArray avg block size. Shown as byte |
purefa.array.performance_bandwidth_bytes (gauge) | FlashArray array throughput in bytes per second. Shown as byte |
purefa.array.performance_iops (gauge) | (Legacy) FlashArray IOPS. Shown as operation |
purefa.array.performance_latency_usec (gauge) | FlashArray array latency in microseconds. Shown as microsecond |
purefa.array.performance_qdepth (gauge) | (Legacy) FlashArray queue depth. |
purefa.array.performance_queue_depth_ops (gauge) | FlashArray array queue depth size. Shown as operation |
purefa.array.performance_throughput_iops (gauge) | FlashArray array throughput in iops. Shown as operation |
purefa.array.space_bytes (gauge) | FlashArray array space in bytes. Shown as byte |
purefa.array.space_capacity_bytes (gauge) | (Legacy) FlashArray overall space capacity. Shown as byte |
purefa.array.space_data_reduction_ratio (gauge) | FlashArray array space data reduction. |
purefa.array.space_datareduction_ratio (gauge) | (Legacy) FlashArray overall data reduction. |
purefa.array.space_provisioned_bytes (gauge) | (Legacy) FlashArray overall provisioned space. Shown as byte |
purefa.array.space_used_bytes (gauge) | (Legacy) FlashArray overall used space. Shown as byte |
purefa.array.space_utilization (gauge) | FlashArray array space utilization in percent. Shown as percent |
purefa.directory.performance_average_bytes (gauge) | FlashArray directory average operations size in bytes. Shown as byte |
purefa.directory.performance_bandwidth_bytes (gauge) | FlashArray directory throughput in bytes per second. Shown as byte |
purefa.directory.performance_latency_usec (gauge) | FlashArray directory latency in microseconds. Shown as microsecond |
purefa.directory.performance_throughput_iops (gauge) | FlashArray directory throughput in iops. Shown as operation |
purefa.directory.space_bytes (gauge) | FlashArray directory space in bytes. Shown as byte |
purefa.directory.space_data_reduction_ratio (gauge) | FlashArray directory space data reduction. |
purefa.drive.capacity_bytes (gauge) | FlashArray drive capacity in bytes. Shown as byte |
purefa.hardware.chassis_health (gauge) | (Legacy) FlashArray hardware chassis health status. |
purefa.hardware.component_health (gauge) | (Legacy) FlashArray hardware component health status. |
purefa.hardware.controller_health (gauge) | (Legacy) FlashArray hardware controller health status. |
purefa.hardware.power_volts (gauge) | (Legacy) FlashArray hardware power supply voltage. Shown as volt |
purefa.hardware.temperature_celsius (gauge) | (Legacy) FlashArray hardware temperature sensors. Shown as degree celsius |
purefa.host.connections_info (gauge) | FlashArray host volumes connections. |
purefa.host.connectivity_info (gauge) | FlashArray host connectivity info. |
purefa.host.performance_average_bytes (gauge) | FlashArray host average operations size in bytes. Shown as byte |
purefa.host.performance_bandwidth_bytes (gauge) | FlashArray host bandwidth in bytes per second. Shown as byte |
purefa.host.performance_iops (gauge) | (Legacy) FlashArray host IOPS. Shown as operation |
purefa.host.performance_latency_usec (gauge) | FlashArray host latency in microseconds. Shown as microsecond |
purefa.host.performance_throughput_iops (gauge) | FlashArray host throughput in iops. Shown as operation |
purefa.host.space_bytes (gauge) | FlashArray host space in bytes. Shown as byte |
purefa.host.space_data_reduction_ratio (gauge) | FlashArray host space data reduction. |
purefa.host.space_datareduction_ratio (gauge) | (Legacy) FlashArray host volumes data reduction ratio. |
purefa.host.space_size_bytes (gauge) | FlashArray host volumes size. Shown as byte |
purefa.hw.component_status (gauge) | FlashArray hardware component status. |
purefa.hw.component_temperature_celsius (gauge) | FlashArray hardware component temperature in C. Shown as degree celsius |
purefa.hw.component_voltage_volt (gauge) | FlashArray hardware component voltage. Shown as volt |
purefa.info (gauge) | FlashArray system information. |
purefa.network.interface_performance_bandwidth_bytes (gauge) | FlashArray network interface bandwidth in bytes per second Shown as byte |
purefa.network.interface_performance_errors (gauge) | FlashArray network interface errors in errors per second Shown as error |
purefa.network.interface_performance_throughput_pkts (gauge) | FlashArray network interface throughput in packets per second. Shown as packet |
purefa.pod.mediator_status (gauge) | (Legacy) FlashArray pod mediatorstatus. |
purefa.pod.performance_average_bytes (gauge) | FlashArray pod average operations size. Shown as byte |
purefa.pod.performance_bandwidth_bytes (gauge) | FlashArray pod throughput in bytes per second. Shown as byte |
purefa.pod.performance_iops (gauge) | (Legacy) FlashArray pod IOPS. Shown as operation |
purefa.pod.performance_latency_usec (gauge) | FlashArray pod latency in microseconds. Shown as microsecond |
purefa.pod.performance_replication_bandwidth_bytes (gauge) | FlashArray pod replication bandwidth. Shown as byte |
purefa.pod.performance_throughput_iops (gauge) | FlashArray pod throughput in iops. Shown as operation |
purefa.pod.replica_links_lag_average_sec (gauge) | FlashArray pod links average lag in seconds. Shown as second |
purefa.pod.replica_links_lag_max_sec (gauge) | FlashArray pod links max lag in seconds. Shown as second |
purefa.pod.replica_links_performance_bandwidth_bytes (gauge) | FlashArray pod links bandwidth. Shown as byte |
purefa.pod.space_bytes (gauge) | FlashArray pod space in bytes. Shown as byte |
purefa.pod.space_data_reduction_ratio (gauge) | FlashArray pod space data reduction. |
purefa.pod.space_datareduction_ratio (gauge) | (Legacy) FlashArray pod data reduction ratio. |
purefa.pod.space_size_bytes (gauge) | (Legacy) FlashArray pod size. Shown as byte |
purefa.pod.status (gauge) | (Legacy) FlashArray pod status. |
purefa.volume.performance_average_bytes (gauge) | FlashArray volume average operations size in bytes. Shown as byte |
purefa.volume.performance_bandwidth_bytes (gauge) | FlashArray volume throughput in bytes per second. Shown as byte |
purefa.volume.performance_iops (gauge) | (Legacy) FlashArray volume IOPS. Shown as operation |
purefa.volume.performance_latency_usec (gauge) | FlashArray volume latency in microseconds. Shown as microsecond |
purefa.volume.performance_throughput_bytes (gauge) | (Legacy) FlashArray volume throughput. Shown as byte |
purefa.volume.performance_throughput_iops (gauge) | FlashArray volume throughput in iops. Shown as operation |
purefa.volume.space_bytes (gauge) | FlashArray volume space in bytes. Shown as byte |
purefa.volume.space_data_reduction_ratio (gauge) | FlashArray volume space data reduction. |
purefa.volume.space_datareduction_ratio (gauge) | (Legacy) FlashArray volumes data reduction ratio. |
purefa.volume.space_size_bytes (gauge) | (Legacy) FlashArray volumes size. Shown as byte |
The PureFA integration does not include any events.
See service_checks.json for a list of service checks provided by this integration.
For support or feature requests, contact Pure Storage through the following methods:
Pure Storage FlashArray Dashboard - Overview (Top)
Pure Storage FlashArray Dashboard - Overview (Middle)
Pure Storage FlashArray Dashboard - Overview (Bottom)