이 페이지는 아직 영어로 제공되지 않습니다. 번역 작업 중입니다.
현재 번역 프로젝트에 대한 질문이나 피드백이 있으신 경우 언제든지 연락주시기 바랍니다.

gcp_gkeonprem_vmware_cluster

`admin_cluster_membership`

Type: STRING
Provider name: adminClusterMembership
Description: Required. The admin cluster this VMware user cluster belongs to. This is the full resource name of the admin cluster’s fleet membership. In the future, references to other resource types might be allowed if admin clusters are modeled as their own resources.

`admin_cluster_name`

Type: STRING
Provider name: adminClusterName
Description: Output only. The resource name of the VMware admin cluster hosting this user cluster.

`ancestors`

Type: UNORDERED_LIST_STRING

`annotations`

Type: MAP_STRING_STRING
Provider name: annotations
Description: Annotations on the VMware user cluster. This field has the same restrictions as Kubernetes annotations. The total size of all keys and values combined is limited to 256k. Key can have 2 segments: prefix (optional) and name (required), separated by a slash (/). Prefix must be a DNS subdomain. Name must be 63 characters or less, begin and end with alphanumerics, with dashes (-), underscores (_), dots (.), and alphanumerics between.

`anti_affinity_groups`

Type: STRUCT
Provider name: antiAffinityGroups
Description: AAGConfig specifies whether to spread VMware user cluster nodes across at least three physical hosts in the datacenter.

aag_config_disabled
Type: BOOLEAN
Provider name: aagConfigDisabled
Description: Spread nodes across at least three physical hosts (requires at least three hosts). Enabled by default.

`authorization`

Type: STRUCT
Provider name: authorization
Description: RBAC policy that will be applied and managed by the Anthos On-Prem API.

admin_users
Type: UNORDERED_LIST_STRUCT
Provider name: adminUsers
Description: For VMware and bare metal user clusters, users will be granted the cluster-admin role on the cluster, which provides full administrative access to the cluster. For bare metal admin clusters, users will be granted the cluster-view role, which limits users to read-only access.
- username
  Type: STRING
  Provider name: username
  Description: Required. The name of the user, e.g. my-gcp-id@gmail.com.

`auto_repair_config`

Type: STRUCT
Provider name: autoRepairConfig
Description: Configuration for auto repairing.

enabled
Type: BOOLEAN
Provider name: enabled
Description: Whether auto repair is enabled.

`binary_authorization`

Type: STRUCT
Provider name: binaryAuthorization
Description: Binary Authorization related configurations.

evaluation_mode
Type: STRING
Provider name: evaluationMode
Description: Mode of operation for binauthz policy evaluation. If unspecified, defaults to DISABLED.
Possible values:
- EVALUATION_MODE_UNSPECIFIED - Default value
- DISABLED - Disable BinaryAuthorization
- PROJECT_SINGLETON_POLICY_ENFORCE - Enforce Kubernetes admission requests with BinaryAuthorization using the project’s singleton policy.

`control_plane_node`

Type: STRUCT
Provider name: controlPlaneNode
Description: VMware user cluster control plane nodes must have either 1 or 3 replicas.

auto_resize_config
Type: STRUCT
Provider name: autoResizeConfig
Description: AutoResizeConfig provides auto resizing configurations.
- enabled
  Type: BOOLEAN
  Provider name: enabled
  Description: Whether to enable controle plane node auto resizing.
cpus
Type: INT64
Provider name: cpus
Description: The number of CPUs for each admin cluster node that serve as control planes for this VMware user cluster. (default: 4 CPUs)
memory
Type: INT64
Provider name: memory
Description: The megabytes of memory for each admin cluster node that serves as a control plane for this VMware user cluster (default: 8192 MB memory).
replicas
Type: INT64
Provider name: replicas
Description: The number of control plane nodes for this VMware user cluster. (default: 1 replica).
vsphere_config
Type: STRUCT
Provider name: vsphereConfig
Description: Vsphere-specific config.
- datastore
  Type: STRING
  Provider name: datastore
  Description: The Vsphere datastore used by the control plane Node.
- storage_policy_name
  Type: STRING
  Provider name: storagePolicyName
  Description: The Vsphere storage policy used by the control plane Node.

`create_time`

Type: TIMESTAMP
Provider name: createTime
Description: Output only. The time at which VMware user cluster was created.

`dataplane_v2`

Type: STRUCT
Provider name: dataplaneV2
Description: VmwareDataplaneV2Config specifies configuration for Dataplane V2.

advanced_networking
Type: BOOLEAN
Provider name: advancedNetworking
Description: Enable advanced networking which requires dataplane_v2_enabled to be set true.
dataplane_v2_enabled
Type: BOOLEAN
Provider name: dataplaneV2Enabled
Description: Enables Dataplane V2.
forward_mode
Type: STRING
Provider name: forwardMode
Description: Configure ForwardMode for Dataplane v2.
windows_dataplane_v2_enabled
Type: BOOLEAN
Provider name: windowsDataplaneV2Enabled
Description: Enable Dataplane V2 for clusters with Windows nodes.

`delete_time`

Type: TIMESTAMP
Provider name: deleteTime
Description: Output only. The time at which VMware user cluster was deleted.

`description`

Type: STRING
Provider name: description
Description: A human readable description of this VMware user cluster.

`disable_bundled_ingress`

Type: BOOLEAN
Provider name: disableBundledIngress
Description: Disable bundled ingress.

`enable_advanced_cluster`

Type: BOOLEAN
Provider name: enableAdvancedCluster
Description: Enable advanced cluster.

`enable_control_plane_v2`

Type: BOOLEAN
Provider name: enableControlPlaneV2
Description: Enable control plane V2. Default to false.

`endpoint`

Type: STRING
Provider name: endpoint
Description: Output only. The DNS name of VMware user cluster’s API server.

`etag`

Type: STRING
Provider name: etag
Description: This checksum is computed by the server based on the value of other fields, and may be sent on update and delete requests to ensure the client has an up-to-date value before proceeding. Allows clients to perform consistent read-modify-writes through optimistic concurrency control.

`fleet`

Type: STRUCT
Provider name: fleet
Description: Output only. Fleet configuration for the cluster.

membership
Type: STRING
Provider name: membership
Description: Output only. The name of the managed fleet Membership resource associated to this cluster. Membership names are formatted as projects//locations//memberships/.

`gcp_status`

Type: STRUCT
Provider name: status
Description: Output only. ResourceStatus representing detailed cluster state.

conditions
Type: UNORDERED_LIST_STRUCT
Provider name: conditions
Description: ResourceCondition provide a standard mechanism for higher-level status reporting from controller.
- last_transition_time
  Type: TIMESTAMP
  Provider name: lastTransitionTime
  Description: Last time the condition transit from one status to another.
- message
  Type: STRING
  Provider name: message
  Description: Human-readable message indicating details about last transition.
- reason
  Type: STRING
  Provider name: reason
  Description: Machine-readable message indicating details about last transition.
- state
  Type: STRING
  Provider name: state
  Description: state of the condition.
  Possible values:
  - STATE_UNSPECIFIED - Not set.
  - STATE_TRUE - Resource is in the condition.
  - STATE_FALSE - Resource is not in the condition.
  - STATE_UNKNOWN - Kubernetes controller can’t decide if the resource is in the condition or not.
- type
  Type: STRING
  Provider name: type
  Description: Type of the condition. (e.g., ClusterRunning, NodePoolRunning or ServerSidePreflightReady)
error_message
Type: STRING
Provider name: errorMessage
Description: Human-friendly representation of the error message from controller. The error message can be temporary as the controller controller creates a cluster or node pool. If the error message persists for a longer period of time, it can be used to surface error message to indicate real problems requiring user intervention.
version
Type: STRING
Provider name: version
Description: Reflect current version of the resource.
versions
Type: STRUCT
Provider name: versions
Description: Shows the mapping of a given version to the number of machines under this version.
- versions
  Type: UNORDERED_LIST_STRUCT
  Provider name: versions
  Description: Shows the mapping of a given version to the number of machines under this version.
  - count
    Type: INT64
    Provider name: count
    Description: Number of machines under the above version.
  - version
    Type: STRING
    Provider name: version
    Description: Resource version.

`labels`

Type: UNORDERED_LIST_STRING

`load_balancer`

Type: STRUCT
Provider name: loadBalancer
Description: Load balancer configuration.

f5_config
Type: STRUCT
Provider name: f5Config
Description: Configuration for F5 Big IP typed load balancers.
- address
  Type: STRING
  Provider name: address
  Description: The load balancer’s IP address.
- partition
  Type: STRING
  Provider name: partition
  Description: The preexisting partition to be used by the load balancer. This partition is usually created for the admin cluster for example: ‘my-f5-admin-partition’.
- snat_pool
  Type: STRING
  Provider name: snatPool
  Description: The pool name. Only necessary, if using SNAT.
manual_lb_config
Type: STRUCT
Provider name: manualLbConfig
Description: Manually configured load balancers.
- control_plane_node_port
  Type: INT32
  Provider name: controlPlaneNodePort
  Description: NodePort for control plane service. The Kubernetes API server in the admin cluster is implemented as a Service of type NodePort (ex. 30968).
- ingress_http_node_port
  Type: INT32
  Provider name: ingressHttpNodePort
  Description: NodePort for ingress service’s http. The ingress service in the admin cluster is implemented as a Service of type NodePort (ex. 32527).
- ingress_https_node_port
  Type: INT32
  Provider name: ingressHttpsNodePort
  Description: NodePort for ingress service’s https. The ingress service in the admin cluster is implemented as a Service of type NodePort (ex. 30139).
- konnectivity_server_node_port
  Type: INT32
  Provider name: konnectivityServerNodePort
  Description: NodePort for konnectivity server service running as a sidecar in each kube-apiserver pod (ex. 30564).
metal_lb_config
Type: STRUCT
Provider name: metalLbConfig
Description: Configuration for MetalLB typed load balancers.
- address_pools
  Type: UNORDERED_LIST_STRUCT
  Provider name: addressPools
  Description: Required. AddressPools is a list of non-overlapping IP pools used by load balancer typed services. All addresses must be routable to load balancer nodes. IngressVIP must be included in the pools.
  - addresses
    Type: UNORDERED_LIST_STRING
    Provider name: addresses
    Description: Required. The addresses that are part of this pool. Each address must be either in the CIDR form (1.2.3.0/24) or range form (1.2.3.1-1.2.3.5).
  - avoid_buggy_ips
    Type: BOOLEAN
    Provider name: avoidBuggyIps
    Description: If true, avoid using IPs ending in .0 or .255. This avoids buggy consumer devices mistakenly dropping IPv4 traffic for those special IP addresses.
  - manual_assign
    Type: BOOLEAN
    Provider name: manualAssign
    Description: If true, prevent IP addresses from being automatically assigned.
  - pool
    Type: STRING
    Provider name: pool
    Description: Required. The name of the address pool.
seesaw_config
Type: STRUCT
Provider name: seesawConfig
Description: Output only. Configuration for Seesaw typed load balancers.
- enable_ha
  Type: BOOLEAN
  Provider name: enableHa
  Description: Enable two load balancer VMs to achieve a highly-available Seesaw load balancer.
- group
  Type: STRING
  Provider name: group
  Description: Required. In general the following format should be used for the Seesaw group name: seesaw-for-[cluster_name].
- ip_blocks
  Type: UNORDERED_LIST_STRUCT
  Provider name: ipBlocks
  Description: Required. The IP Blocks to be used by the Seesaw load balancer
  - gateway
    Type: STRING
    Provider name: gateway
    Description: The network gateway used by the VMware user cluster.
  - ips
    Type: UNORDERED_LIST_STRUCT
    Provider name: ips
    Description: The node’s network configurations used by the VMware user cluster.
    - hostname
      Type: STRING
      Provider name: hostname
      Description: Hostname of the machine. VM’s name will be used if this field is empty.
    - ip
      Type: STRING
      Provider name: ip
      Description: IP could be an IP address (like 1.2.3.4) or a CIDR (like 1.2.3.0/24).
  - netmask
    Type: STRING
    Provider name: netmask
    Description: The netmask used by the VMware user cluster.
- master_ip
  Type: STRING
  Provider name: masterIp
  Description: Required. MasterIP is the IP announced by the master of Seesaw group.
- stackdriver_name
  Type: STRING
  Provider name: stackdriverName
  Description: Name to be used by Stackdriver.
- vms
  Type: UNORDERED_LIST_STRING
  Provider name: vms
  Description: Names of the VMs created for this Seesaw group.
vip_config
Type: STRUCT
Provider name: vipConfig
Description: The VIPs used by the load balancer.
- control_plane_vip
  Type: STRING
  Provider name: controlPlaneVip
  Description: The VIP which you previously set aside for the Kubernetes API of this cluster.
- ingress_vip
  Type: STRING
  Provider name: ingressVip
  Description: The VIP which you previously set aside for ingress traffic into this cluster.

`local_name`

Type: STRING
Provider name: localName
Description: Output only. The object name of the VMware OnPremUserCluster custom resource on the associated admin cluster. This field is used to support conflicting names when enrolling existing clusters to the API. When used as a part of cluster enrollment, this field will differ from the ID in the resource name. For new clusters, this field will match the user provided cluster name and be visible in the last component of the resource name. It is not modifiable. All users should use this name to access their cluster using gkectl or kubectl and should expect to see the local name when viewing admin cluster controller logs.

`name`

Type: STRING
Provider name: name
Description: Immutable. The VMware user cluster resource name.

`network_config`

Type: STRUCT
Provider name: networkConfig
Description: The VMware user cluster network configuration.

control_plane_v2_config
Type: STRUCT
Provider name: controlPlaneV2Config
Description: Configuration for control plane V2 mode.
- control_plane_ip_block
  Type: STRUCT
  Provider name: controlPlaneIpBlock
  Description: Static IP addresses for the control plane nodes.
  - gateway
    Type: STRING
    Provider name: gateway
    Description: The network gateway used by the VMware user cluster.
  - ips
    Type: UNORDERED_LIST_STRUCT
    Provider name: ips
    Description: The node’s network configurations used by the VMware user cluster.
    - hostname
      Type: STRING
      Provider name: hostname
      Description: Hostname of the machine. VM’s name will be used if this field is empty.
    - ip
      Type: STRING
      Provider name: ip
      Description: IP could be an IP address (like 1.2.3.4) or a CIDR (like 1.2.3.0/24).
  - netmask
    Type: STRING
    Provider name: netmask
    Description: The netmask used by the VMware user cluster.
dhcp_ip_config
Type: STRUCT
Provider name: dhcpIpConfig
Description: Configuration settings for a DHCP IP configuration.
- enabled
  Type: BOOLEAN
  Provider name: enabled
  Description: enabled is a flag to mark if DHCP IP allocation is used for VMware user clusters.
host_config
Type: STRUCT
Provider name: hostConfig
Description: Represents common network settings irrespective of the host’s IP address.
- dns_search_domains
  Type: UNORDERED_LIST_STRING
  Provider name: dnsSearchDomains
  Description: DNS search domains.
- dns_servers
  Type: UNORDERED_LIST_STRING
  Provider name: dnsServers
  Description: DNS servers.
- ntp_servers
  Type: UNORDERED_LIST_STRING
  Provider name: ntpServers
  Description: NTP servers.
pod_address_cidr_blocks
Type: UNORDERED_LIST_STRING
Provider name: podAddressCidrBlocks
Description: Required. All pods in the cluster are assigned an RFC1918 IPv4 address from these ranges. Only a single range is supported. This field cannot be changed after creation.
service_address_cidr_blocks
Type: UNORDERED_LIST_STRING
Provider name: serviceAddressCidrBlocks
Description: Required. All services in the cluster are assigned an RFC1918 IPv4 address from these ranges. Only a single range is supported. This field cannot be changed after creation.
static_ip_config
Type: STRUCT
Provider name: staticIpConfig
Description: Configuration settings for a static IP configuration.
- ip_blocks
  Type: UNORDERED_LIST_STRUCT
  Provider name: ipBlocks
  Description: Represents the configuration values for static IP allocation to nodes.
  - gateway
    Type: STRING
    Provider name: gateway
    Description: The network gateway used by the VMware user cluster.
  - ips
    Type: UNORDERED_LIST_STRUCT
    Provider name: ips
    Description: The node’s network configurations used by the VMware user cluster.
    - hostname
      Type: STRING
      Provider name: hostname
      Description: Hostname of the machine. VM’s name will be used if this field is empty.
    - ip
      Type: STRING
      Provider name: ip
      Description: IP could be an IP address (like 1.2.3.4) or a CIDR (like 1.2.3.0/24).
  - netmask
    Type: STRING
    Provider name: netmask
    Description: The netmask used by the VMware user cluster.
vcenter_network
Type: STRING
Provider name: vcenterNetwork
Description: vcenter_network specifies vCenter network name. Inherited from the admin cluster.

`on_prem_version`

Type: STRING
Provider name: onPremVersion
Description: Required. The Anthos clusters on the VMware version for your user cluster.

`organization_id`

Type: STRING

`parent`

Type: STRING

`project_id`

Type: STRING

`project_number`

Type: STRING

`reconciling`

Type: BOOLEAN
Provider name: reconciling
Description: Output only. If set, there are currently changes in flight to the VMware user cluster.

`resource_name`

Type: STRING

`state`

Type: STRING
Provider name: state
Description: Output only. The current state of VMware user cluster.
Possible values:

STATE_UNSPECIFIED - Not set.
PROVISIONING - The PROVISIONING state indicates the cluster is being created.
RUNNING - The RUNNING state indicates the cluster has been created and is fully usable.
RECONCILING - The RECONCILING state indicates that the cluster is being updated. It remains available, but potentially with degraded performance.
STOPPING - The STOPPING state indicates the cluster is being deleted.
ERROR - The ERROR state indicates the cluster is in a broken unrecoverable state.
DEGRADED - The DEGRADED state indicates the cluster requires user action to restore full functionality.

`storage`

Type: STRUCT
Provider name: storage
Description: Storage configuration.

vsphere_csi_disabled
Type: BOOLEAN
Provider name: vsphereCsiDisabled
Description: Whether or not to deploy vSphere CSI components in the VMware user cluster. Enabled by default.

`tags`

Type: UNORDERED_LIST_STRING

`uid`

Type: STRING
Provider name: uid
Description: Output only. The unique identifier of the VMware user cluster.

`update_time`

Type: TIMESTAMP
Provider name: updateTime
Description: Output only. The time at which VMware user cluster was last updated.

`upgrade_policy`

Type: STRUCT
Provider name: upgradePolicy
Description: Specifies upgrade policy for the cluster.

control_plane_only
Type: BOOLEAN
Provider name: controlPlaneOnly
Description: Controls whether the upgrade applies to the control plane only.

`validation_check`

Type: STRUCT
Provider name: validationCheck
Description: Output only. ValidationCheck represents the result of the preflight check job.

gcp_status
Type: STRUCT
Provider name: status
Description: Output only. The detailed validation check status.
- result
  Type: UNORDERED_LIST_STRUCT
  Provider name: result
  Description: Individual checks which failed as part of the Preflight check execution.
  - category
    Type: STRING
    Provider name: category
    Description: The category of the validation.
  - description
    Type: STRING
    Provider name: description
    Description: The description of the validation check.
  - details
    Type: STRING
    Provider name: details
    Description: Detailed failure information, which might be unformatted.
  - reason
    Type: STRING
    Provider name: reason
    Description: A human-readable message of the check failure.
  - state
    Type: STRING
    Provider name: state
    Description: The validation check state.
    Possible values:
    - STATE_UNKNOWN - The default value. The check result is unknown.
    - STATE_FAILURE - The check failed.
    - STATE_SKIPPED - The check was skipped.
    - STATE_FATAL - The check itself failed to complete.
    - STATE_WARNING - The check encountered a warning.
option
Type: STRING
Provider name: option
Description: Options used for the validation check
Possible values:
- OPTIONS_UNSPECIFIED - Default value. Standard preflight validation check will be used.
- SKIP_VALIDATION_CHECK_BLOCKING - Prevent failed preflight checks from failing.
- SKIP_VALIDATION_ALL - Skip all preflight check validations.
scenario
Type: STRING
Provider name: scenario
Description: Output only. The scenario when the preflight checks were run.
Possible values:
- SCENARIO_UNSPECIFIED - Default value. This value is unused.
- CREATE - The validation check occurred during a create flow.
- UPDATE - The validation check occurred during an update flow.

`vcenter`

Type: STRUCT
Provider name: vcenter
Description: VmwareVCenterConfig specifies vCenter config for the user cluster. If unspecified, it is inherited from the admin cluster.

address
Type: STRING
Provider name: address
Description: Output only. The vCenter IP address.
ca_cert_data
Type: STRING
Provider name: caCertData
Description: Contains the vCenter CA certificate public key for SSL verification.
cluster
Type: STRING
Provider name: cluster
Description: The name of the vCenter cluster for the user cluster.
datacenter
Type: STRING
Provider name: datacenter
Description: The name of the vCenter datacenter for the user cluster.
datastore
Type: STRING
Provider name: datastore
Description: The name of the vCenter datastore for the user cluster.
folder
Type: STRING
Provider name: folder
Description: The name of the vCenter folder for the user cluster.
resource_pool
Type: STRING
Provider name: resourcePool
Description: The name of the vCenter resource pool for the user cluster.
storage_policy_name
Type: STRING
Provider name: storagePolicyName
Description: The name of the vCenter storage policy for the user cluster.

`vm_tracking_enabled`

Type: BOOLEAN
Provider name: vmTrackingEnabled
Description: Enable VM tracking.