This product is not supported for your selected Datadog site. ().
このページは日本語には対応しておりません。随時翻訳に取り組んでいます。
翻訳に関してご質問やご意見ございましたら、お気軽にご連絡ください。

gcp_gkebackup_restore

ancestors

Type: UNORDERED_LIST_STRING

backup

Type: STRING
Provider name: backup
Description: Required. Immutable. A reference to the Backup used as the source from which this Restore will restore. Note that this Backup must be a sub-resource of the RestorePlan’s backup_plan. Format: projects/*/locations/*/backupPlans/*/backups/*.

cluster

Type: STRING
Provider name: cluster
Description: Output only. The target cluster into which this Restore will restore data. Valid formats: - projects/*/locations/*/clusters/* - projects/*/zones/*/clusters/* Inherited from parent RestorePlan’s cluster value.

complete_time

Type: TIMESTAMP
Provider name: completeTime
Description: Output only. Timestamp of when the restore operation completed.

create_time

Type: TIMESTAMP
Provider name: createTime
Description: Output only. The timestamp when this Restore resource was created.

description

Type: STRING
Provider name: description
Description: Optional. User specified descriptive string for this Restore.

etag

Type: STRING
Provider name: etag
Description: Output only. etag is used for optimistic concurrency control as a way to help prevent simultaneous updates of a restore from overwriting each other. It is strongly suggested that systems make use of the etag in the read-modify-write cycle to perform restore updates in order to avoid race conditions: An etag is returned in the response to GetRestore, and systems are expected to put that etag in the request to UpdateRestore or DeleteRestore to ensure that their change will be applied to the same version of the resource.

filter

Type: STRUCT
Provider name: filter
Description: Optional. Immutable. Filters resources for Restore. If not specified, the scope of the restore will remain the same as defined in the RestorePlan. If this is specified and no resources are matched by the inclusion_filters or everything is excluded by the exclusion_filters, nothing will be restored. This filter can only be specified if the value of namespaced_resource_restore_mode is set to MERGE_SKIP_ON_CONFLICT, MERGE_REPLACE_VOLUME_ON_CONFLICT or MERGE_REPLACE_ON_CONFLICT.

  • exclusion_filters
    Type: UNORDERED_LIST_STRUCT
    Provider name: exclusionFilters
    Description: Optional. Excludes resources from restoration. If specified, a resource will not be restored if it matches any ResourceSelector of the exclusion_filters.
    • group_kind
      Type: STRUCT
      Provider name: groupKind
      Description: Optional. Selects resources using their Kubernetes GroupKinds. If specified, only resources of provided GroupKind will be selected.
      • resource_group
        Type: STRING
        Provider name: resourceGroup
        Description: Optional. API group string of a Kubernetes resource, e.g. “apiextensions.k8s.io”, “storage.k8s.io”, etc. Note: use empty string for core API group.
      • resource_kind
        Type: STRING
        Provider name: resourceKind
        Description: Optional. Kind of a Kubernetes resource, must be in UpperCamelCase (PascalCase) and singular form. E.g. “CustomResourceDefinition”, “StorageClass”, etc.
    • name
      Type: STRING
      Provider name: name
      Description: Optional. Selects resources using their resource names. If specified, only resources with the provided name will be selected.
    • namespace
      Type: STRING
      Provider name: namespace
      Description: Optional. Selects resources using their namespaces. This only applies to namespace scoped resources and cannot be used for selecting cluster scoped resources. If specified, only resources in the provided namespace will be selected. If not specified, the filter will apply to both cluster scoped and namespace scoped resources (e.g. name or label). The Namespace resource itself will be restored if and only if any resources within the namespace are restored.
  • inclusion_filters
    Type: UNORDERED_LIST_STRUCT
    Provider name: inclusionFilters
    Description: Optional. Selects resources for restoration. If specified, only resources which match inclusion_filters will be selected for restoration. A resource will be selected if it matches any ResourceSelector of the inclusion_filters.
    • group_kind
      Type: STRUCT
      Provider name: groupKind
      Description: Optional. Selects resources using their Kubernetes GroupKinds. If specified, only resources of provided GroupKind will be selected.
      • resource_group
        Type: STRING
        Provider name: resourceGroup
        Description: Optional. API group string of a Kubernetes resource, e.g. “apiextensions.k8s.io”, “storage.k8s.io”, etc. Note: use empty string for core API group.
      • resource_kind
        Type: STRING
        Provider name: resourceKind
        Description: Optional. Kind of a Kubernetes resource, must be in UpperCamelCase (PascalCase) and singular form. E.g. “CustomResourceDefinition”, “StorageClass”, etc.
    • name
      Type: STRING
      Provider name: name
      Description: Optional. Selects resources using their resource names. If specified, only resources with the provided name will be selected.
    • namespace
      Type: STRING
      Provider name: namespace
      Description: Optional. Selects resources using their namespaces. This only applies to namespace scoped resources and cannot be used for selecting cluster scoped resources. If specified, only resources in the provided namespace will be selected. If not specified, the filter will apply to both cluster scoped and namespace scoped resources (e.g. name or label). The Namespace resource itself will be restored if and only if any resources within the namespace are restored.

labels

Type: UNORDERED_LIST_STRING

name

Type: STRING
Provider name: name
Description: Output only. The full name of the Restore resource. Format: projects/*/locations/*/restorePlans/*/restores/*

organization_id

Type: STRING

parent

Type: STRING

project_id

Type: STRING

project_number

Type: STRING

resource_name

Type: STRING

resources_excluded_count

Type: INT32
Provider name: resourcesExcludedCount
Description: Output only. Number of resources excluded during the restore execution.

resources_failed_count

Type: INT32
Provider name: resourcesFailedCount
Description: Output only. Number of resources that failed to be restored during the restore execution.

resources_restored_count

Type: INT32
Provider name: resourcesRestoredCount
Description: Output only. Number of resources restored during the restore execution.

restore_config

Type: STRUCT
Provider name: restoreConfig
Description: Output only. Configuration of the Restore. Inherited from parent RestorePlan’s restore_config.

  • all_namespaces
    Type: BOOLEAN
    Provider name: allNamespaces
    Description: Restore all namespaced resources in the Backup if set to “True”. Specifying this field to “False” is an error.
  • cluster_resource_conflict_policy
    Type: STRING
    Provider name: clusterResourceConflictPolicy
    Description: Optional. Defines the behavior for handling the situation where cluster-scoped resources being restored already exist in the target cluster. This MUST be set to a value other than CLUSTER_RESOURCE_CONFLICT_POLICY_UNSPECIFIED if cluster_resource_restore_scope is not empty.
    Possible values:
    • CLUSTER_RESOURCE_CONFLICT_POLICY_UNSPECIFIED - Unspecified. Only allowed if no cluster-scoped resources will be restored.
    • USE_EXISTING_VERSION - Do not attempt to restore the conflicting resource.
    • USE_BACKUP_VERSION - Delete the existing version before re-creating it from the Backup. This is a dangerous option which could cause unintentional data loss if used inappropriately. For example, deleting a CRD will cause Kubernetes to delete all CRs of that type.
  • cluster_resource_restore_scope
    Type: STRUCT
    Provider name: clusterResourceRestoreScope
    Description: Optional. Identifies the cluster-scoped resources to restore from the Backup. Not specifying it means NO cluster resource will be restored.
    • all_group_kinds
      Type: BOOLEAN
      Provider name: allGroupKinds
      Description: Optional. If True, all valid cluster-scoped resources will be restored. Mutually exclusive to any other field in the message.
    • excluded_group_kinds
      Type: UNORDERED_LIST_STRUCT
      Provider name: excludedGroupKinds
      Description: Optional. A list of cluster-scoped resource group kinds to NOT restore from the backup. If specified, all valid cluster-scoped resources will be restored except for those specified in the list. Mutually exclusive to any other field in the message.
      • resource_group
        Type: STRING
        Provider name: resourceGroup
        Description: Optional. API group string of a Kubernetes resource, e.g. “apiextensions.k8s.io”, “storage.k8s.io”, etc. Note: use empty string for core API group.
      • resource_kind
        Type: STRING
        Provider name: resourceKind
        Description: Optional. Kind of a Kubernetes resource, must be in UpperCamelCase (PascalCase) and singular form. E.g. “CustomResourceDefinition”, “StorageClass”, etc.
    • no_group_kinds
      Type: BOOLEAN
      Provider name: noGroupKinds
      Description: Optional. If True, no cluster-scoped resources will be restored. This has the same restore scope as if the message is not defined. Mutually exclusive to any other field in the message.
    • selected_group_kinds
      Type: UNORDERED_LIST_STRUCT
      Provider name: selectedGroupKinds
      Description: Optional. A list of cluster-scoped resource group kinds to restore from the backup. If specified, only the selected resources will be restored. Mutually exclusive to any other field in the message.
      • resource_group
        Type: STRING
        Provider name: resourceGroup
        Description: Optional. API group string of a Kubernetes resource, e.g. “apiextensions.k8s.io”, “storage.k8s.io”, etc. Note: use empty string for core API group.
      • resource_kind
        Type: STRING
        Provider name: resourceKind
        Description: Optional. Kind of a Kubernetes resource, must be in UpperCamelCase (PascalCase) and singular form. E.g. “CustomResourceDefinition”, “StorageClass”, etc.
  • excluded_namespaces
    Type: STRUCT
    Provider name: excludedNamespaces
    Description: A list of selected namespaces excluded from restoration. All namespaces except those in this list will be restored.
    • namespaces
      Type: UNORDERED_LIST_STRING
      Provider name: namespaces
      Description: Optional. A list of Kubernetes Namespaces.
  • namespaced_resource_restore_mode
    Type: STRING
    Provider name: namespacedResourceRestoreMode
    Description: Optional. Defines the behavior for handling the situation where sets of namespaced resources being restored already exist in the target cluster. This MUST be set to a value other than NAMESPACED_RESOURCE_RESTORE_MODE_UNSPECIFIED.
    Possible values:
    • NAMESPACED_RESOURCE_RESTORE_MODE_UNSPECIFIED - Unspecified (invalid).
    • DELETE_AND_RESTORE - When conflicting top-level resources (either Namespaces or ProtectedApplications, depending upon the scope) are encountered, this will first trigger a delete of the conflicting resource AND ALL OF ITS REFERENCED RESOURCES (e.g., all resources in the Namespace or all resources referenced by the ProtectedApplication) before restoring the resources from the Backup. This mode should only be used when you are intending to revert some portion of a cluster to an earlier state.
    • FAIL_ON_CONFLICT - If conflicting top-level resources (either Namespaces or ProtectedApplications, depending upon the scope) are encountered at the beginning of a restore process, the Restore will fail. If a conflict occurs during the restore process itself (e.g., because an out of band process creates conflicting resources), a conflict will be reported.
    • MERGE_SKIP_ON_CONFLICT - This mode merges the backup and the target cluster and skips the conflicting resources. If a single resource to restore exists in the cluster before restoration, the resource will be skipped, otherwise it will be restored.
    • MERGE_REPLACE_VOLUME_ON_CONFLICT - This mode merges the backup and the target cluster and skips the conflicting resources except volume data. If a PVC to restore already exists, this mode will restore/reconnect the volume without overwriting the PVC. It is similar to MERGE_SKIP_ON_CONFLICT except that it will apply the volume data policy for the conflicting PVCs: - RESTORE_VOLUME_DATA_FROM_BACKUP: restore data only and respect the reclaim policy of the original PV; - REUSE_VOLUME_HANDLE_FROM_BACKUP: reconnect and respect the reclaim policy of the original PV; - NO_VOLUME_DATA_RESTORATION: new provision and respect the reclaim policy of the original PV. Note that this mode could cause data loss as the original PV can be retained or deleted depending on its reclaim policy.
    • MERGE_REPLACE_ON_CONFLICT - This mode merges the backup and the target cluster and replaces the conflicting resources with the ones in the backup. If a single resource to restore exists in the cluster before restoration, the resource will be replaced with the one from the backup. To replace an existing resource, the first attempt is to update the resource to match the one from the backup; if the update fails, the second attempt is to delete the resource and restore it from the backup. Note that this mode could cause data loss as it replaces the existing resources in the target cluster, and the original PV can be retained or deleted depending on its reclaim policy.
  • no_namespaces
    Type: BOOLEAN
    Provider name: noNamespaces
    Description: Do not restore any namespaced resources if set to “True”. Specifying this field to “False” is not allowed.
  • restore_order
    Type: STRUCT
    Provider name: restoreOrder
    Description: Optional. RestoreOrder contains custom ordering to use on a Restore.
    • group_kind_dependencies
      Type: UNORDERED_LIST_STRUCT
      Provider name: groupKindDependencies
      Description: Optional. Contains a list of group kind dependency pairs provided by the customer, that is used by Backup for GKE to generate a group kind restore order.
      • requiring
        Type: STRUCT
        Provider name: requiring
        Description: Required. The requiring group kind requires that the other group kind be restored first.
        • resource_group
          Type: STRING
          Provider name: resourceGroup
          Description: Optional. API group string of a Kubernetes resource, e.g. “apiextensions.k8s.io”, “storage.k8s.io”, etc. Note: use empty string for core API group.
        • resource_kind
          Type: STRING
          Provider name: resourceKind
          Description: Optional. Kind of a Kubernetes resource, must be in UpperCamelCase (PascalCase) and singular form. E.g. “CustomResourceDefinition”, “StorageClass”, etc.
      • satisfying
        Type: STRUCT
        Provider name: satisfying
        Description: Required. The satisfying group kind must be restored first in order to satisfy the dependency.
        • resource_group
          Type: STRING
          Provider name: resourceGroup
          Description: Optional. API group string of a Kubernetes resource, e.g. “apiextensions.k8s.io”, “storage.k8s.io”, etc. Note: use empty string for core API group.
        • resource_kind
          Type: STRING
          Provider name: resourceKind
          Description: Optional. Kind of a Kubernetes resource, must be in UpperCamelCase (PascalCase) and singular form. E.g. “CustomResourceDefinition”, “StorageClass”, etc.
  • selected_applications
    Type: STRUCT
    Provider name: selectedApplications
    Description: A list of selected ProtectedApplications to restore. The listed ProtectedApplications and all the resources to which they refer will be restored.
    • namespaced_names
      Type: UNORDERED_LIST_STRUCT
      Provider name: namespacedNames
      Description: Optional. A list of namespaced Kubernetes resources.
      • name
        Type: STRING
        Provider name: name
        Description: Optional. The name of the Kubernetes resource.
      • namespace
        Type: STRING
        Provider name: namespace
        Description: Optional. The Namespace of the Kubernetes resource.
  • selected_namespaces
    Type: STRUCT
    Provider name: selectedNamespaces
    Description: A list of selected Namespaces to restore from the Backup. The listed Namespaces and all resources contained in them will be restored.
    • namespaces
      Type: UNORDERED_LIST_STRING
      Provider name: namespaces
      Description: Optional. A list of Kubernetes Namespaces.
  • substitution_rules
    Type: UNORDERED_LIST_STRUCT
    Provider name: substitutionRules
    Description: Optional. A list of transformation rules to be applied against Kubernetes resources as they are selected for restoration from a Backup. Rules are executed in order defined - this order matters, as changes made by a rule may impact the filtering logic of subsequent rules. An empty list means no substitution will occur.
    • new_value
      Type: STRING
      Provider name: newValue
      Description: Optional. This is the new value to set for any fields that pass the filtering and selection criteria. To remove a value from a Kubernetes resource, either leave this field unspecified, or set it to the empty string ("").
    • original_value_pattern
      Type: STRING
      Provider name: originalValuePattern
      Description: Optional. (Filtering parameter) This is a [regular expression] (https://en.wikipedia.org/wiki/Regular_expression) that is compared against the fields matched by the target_json_path expression (and must also have passed the previous filters). Substitution will not be performed against fields whose value does not match this expression. If this field is NOT specified, then ALL fields matched by the target_json_path expression will undergo substitution. Note that an empty (e.g., “”, rather than unspecified) value for this field will only match empty fields.
    • target_group_kinds
      Type: UNORDERED_LIST_STRUCT
      Provider name: targetGroupKinds
      Description: Optional. (Filtering parameter) Any resource subject to substitution must belong to one of the listed “types”. If this field is not provided, no type filtering will be performed (all resources of all types matching previous filtering parameters will be candidates for substitution).
      • resource_group
        Type: STRING
        Provider name: resourceGroup
        Description: Optional. API group string of a Kubernetes resource, e.g. “apiextensions.k8s.io”, “storage.k8s.io”, etc. Note: use empty string for core API group.
      • resource_kind
        Type: STRING
        Provider name: resourceKind
        Description: Optional. Kind of a Kubernetes resource, must be in UpperCamelCase (PascalCase) and singular form. E.g. “CustomResourceDefinition”, “StorageClass”, etc.
    • target_json_path
      Type: STRING
      Provider name: targetJsonPath
      Description: Required. This is a [JSONPath] (https://kubernetes.io/docs/reference/kubectl/jsonpath/) expression that matches specific fields of candidate resources and it operates as both a filtering parameter (resources that are not matched with this expression will not be candidates for substitution) as well as a field identifier (identifies exactly which fields out of the candidate resources will be modified).
    • target_namespaces
      Type: UNORDERED_LIST_STRING
      Provider name: targetNamespaces
      Description: Optional. (Filtering parameter) Any resource subject to substitution must be contained within one of the listed Kubernetes Namespace in the Backup. If this field is not provided, no namespace filtering will be performed (all resources in all Namespaces, including all cluster-scoped resources, will be candidates for substitution). To mix cluster-scoped and namespaced resources in the same rule, use an empty string ("") as one of the target namespaces.
  • transformation_rules
    Type: UNORDERED_LIST_STRUCT
    Provider name: transformationRules
    Description: Optional. A list of transformation rules to be applied against Kubernetes resources as they are selected for restoration from a Backup. Rules are executed in order defined - this order matters, as changes made by a rule may impact the filtering logic of subsequent rules. An empty list means no transformation will occur.
    • description
      Type: STRING
      Provider name: description
      Description: Optional. The description is a user specified string description of the transformation rule.
    • field_actions
      Type: UNORDERED_LIST_STRUCT
      Provider name: fieldActions
      Description: Required. A list of transformation rule actions to take against candidate resources. Actions are executed in order defined - this order matters, as they could potentially interfere with each other and the first operation could affect the outcome of the second operation.
      • from_path
        Type: STRING
        Provider name: fromPath
        Description: Optional. A string containing a JSON Pointer value that references the location in the target document to move the value from.
      • op
        Type: STRING
        Provider name: op
        Description: Required. op specifies the operation to perform.
        Possible values:
        • OP_UNSPECIFIED - Unspecified operation
        • REMOVE - The ‘remove’ operation removes the value at the target location.
        • MOVE - The ‘move’ operation removes the value at a specified location and adds it to the target location.
        • COPY - The ‘copy’ operation copies the value at a specified location to the target location.
        • ADD - The ‘add’ operation performs one of the following functions, depending upon what the target location references: 1. If the target location specifies an array index, a new value is inserted into the array at the specified index. 2. If the target location specifies an object member that does not already exist, a new member is added to the object. 3. If the target location specifies an object member that does exist, that member's value is replaced.
        • TEST - The ’test’ operation tests that a value at the target location is equal to a specified value.
        • REPLACE - The ‘replace’ operation replaces the value at the target location with a new value. The operation object MUST contain a ‘value’ member whose content specifies the replacement value.
      • path
        Type: STRING
        Provider name: path
        Description: Optional. A string containing a JSON-Pointer value that references a location within the target document where the operation is performed.
      • value
        Type: STRING
        Provider name: value
        Description: Optional. A string that specifies the desired value in string format to use for transformation.
    • resource_filter
      Type: STRUCT
      Provider name: resourceFilter
      Description: Optional. This field is used to specify a set of fields that should be used to determine which resources in backup should be acted upon by the supplied transformation rule actions, and this will ensure that only specific resources are affected by transformation rule actions.
      • group_kinds
        Type: UNORDERED_LIST_STRUCT
        Provider name: groupKinds
        Description: Optional. (Filtering parameter) Any resource subject to transformation must belong to one of the listed “types”. If this field is not provided, no type filtering will be performed (all resources of all types matching previous filtering parameters will be candidates for transformation).
        • resource_group
          Type: STRING
          Provider name: resourceGroup
          Description: Optional. API group string of a Kubernetes resource, e.g. “apiextensions.k8s.io”, “storage.k8s.io”, etc. Note: use empty string for core API group.
        • resource_kind
          Type: STRING
          Provider name: resourceKind
          Description: Optional. Kind of a Kubernetes resource, must be in UpperCamelCase (PascalCase) and singular form. E.g. “CustomResourceDefinition”, “StorageClass”, etc.
      • json_path
        Type: STRING
        Provider name: jsonPath
        Description: Optional. This is a [JSONPath] (https://github.com/json-path/JsonPath/blob/master/README.md) expression that matches specific fields of candidate resources and it operates as a filtering parameter (resources that are not matched with this expression will not be candidates for transformation).
      • namespaces
        Type: UNORDERED_LIST_STRING
        Provider name: namespaces
        Description: Optional. (Filtering parameter) Any resource subject to transformation must be contained within one of the listed Kubernetes Namespace in the Backup. If this field is not provided, no namespace filtering will be performed (all resources in all Namespaces, including all cluster-scoped resources, will be candidates for transformation).
  • volume_data_restore_policy
    Type: STRING
    Provider name: volumeDataRestorePolicy
    Description: Optional. Specifies the mechanism to be used to restore volume data. Default: VOLUME_DATA_RESTORE_POLICY_UNSPECIFIED (will be treated as NO_VOLUME_DATA_RESTORATION).
    Possible values:
    • VOLUME_DATA_RESTORE_POLICY_UNSPECIFIED - Unspecified (illegal).
    • RESTORE_VOLUME_DATA_FROM_BACKUP - For each PVC to be restored, create a new underlying volume and PV from the corresponding VolumeBackup contained within the Backup.
    • REUSE_VOLUME_HANDLE_FROM_BACKUP - For each PVC to be restored, attempt to reuse the original PV contained in the Backup (with its original underlying volume). This option is likely only usable when restoring a workload to its original cluster.
    • NO_VOLUME_DATA_RESTORATION - For each PVC to be restored, create PVC without any particular action to restore data. In this case, the normal Kubernetes provisioning logic would kick in, and this would likely result in either dynamically provisioning blank PVs or binding to statically provisioned PVs.
  • volume_data_restore_policy_bindings
    Type: UNORDERED_LIST_STRUCT
    Provider name: volumeDataRestorePolicyBindings
    Description: Optional. A table that binds volumes by their scope to a restore policy. Bindings must have a unique scope. Any volumes not scoped in the bindings are subject to the policy defined in volume_data_restore_policy.
    • policy
      Type: STRING
      Provider name: policy
      Description: Required. The VolumeDataRestorePolicy to apply when restoring volumes in scope.
      Possible values:
      • VOLUME_DATA_RESTORE_POLICY_UNSPECIFIED - Unspecified (illegal).
      • RESTORE_VOLUME_DATA_FROM_BACKUP - For each PVC to be restored, create a new underlying volume and PV from the corresponding VolumeBackup contained within the Backup.
      • REUSE_VOLUME_HANDLE_FROM_BACKUP - For each PVC to be restored, attempt to reuse the original PV contained in the Backup (with its original underlying volume). This option is likely only usable when restoring a workload to its original cluster.
      • NO_VOLUME_DATA_RESTORATION - For each PVC to be restored, create PVC without any particular action to restore data. In this case, the normal Kubernetes provisioning logic would kick in, and this would likely result in either dynamically provisioning blank PVs or binding to statically provisioned PVs.
    • volume_type
      Type: STRING
      Provider name: volumeType
      Description: The volume type, as determined by the PVC’s bound PV, to apply the policy to.
      Possible values:
      • VOLUME_TYPE_UNSPECIFIED - Default
      • GCE_PERSISTENT_DISK - Compute Engine Persistent Disk volume

state

Type: STRING
Provider name: state
Description: Output only. The current state of the Restore.
Possible values:

  • STATE_UNSPECIFIED - The Restore resource is in the process of being created.
  • CREATING - The Restore resource has been created and the associated RestoreJob Kubernetes resource has been injected into target cluster.
  • IN_PROGRESS - The gkebackup agent in the cluster has begun executing the restore operation.
  • SUCCEEDED - The restore operation has completed successfully. Restored workloads may not yet be operational.
  • FAILED - The restore operation has failed.
  • DELETING - This Restore resource is in the process of being deleted.
  • VALIDATING - The Kubernetes resources created by this Restore are being validated.

state_reason

Type: STRING
Provider name: stateReason
Description: Output only. Human-readable description of why the Restore is in its current state. This field is only meant for human readability and should not be used programmatically as this field is not guaranteed to be consistent.

tags

Type: UNORDERED_LIST_STRING

uid

Type: STRING
Provider name: uid
Description: Output only. Server generated global unique identifier of UUID format.

update_time

Type: TIMESTAMP
Provider name: updateTime
Description: Output only. The timestamp when this Restore resource was last updated.

volume_data_restore_policy_overrides

Type: UNORDERED_LIST_STRUCT
Provider name: volumeDataRestorePolicyOverrides
Description: Optional. Immutable. Overrides the volume data restore policies selected in the Restore Config for override-scoped resources.

  • policy
    Type: STRING
    Provider name: policy
    Description: Required. The VolumeDataRestorePolicy to apply when restoring volumes in scope.
    Possible values:
    • VOLUME_DATA_RESTORE_POLICY_UNSPECIFIED - Unspecified (illegal).
    • RESTORE_VOLUME_DATA_FROM_BACKUP - For each PVC to be restored, create a new underlying volume and PV from the corresponding VolumeBackup contained within the Backup.
    • REUSE_VOLUME_HANDLE_FROM_BACKUP - For each PVC to be restored, attempt to reuse the original PV contained in the Backup (with its original underlying volume). This option is likely only usable when restoring a workload to its original cluster.
    • NO_VOLUME_DATA_RESTORATION - For each PVC to be restored, create PVC without any particular action to restore data. In this case, the normal Kubernetes provisioning logic would kick in, and this would likely result in either dynamically provisioning blank PVs or binding to statically provisioned PVs.
  • selected_pvcs
    Type: STRUCT
    Provider name: selectedPvcs
    Description: A list of PVCs to apply the policy override to.
    • namespaced_names
      Type: UNORDERED_LIST_STRUCT
      Provider name: namespacedNames
      Description: Optional. A list of namespaced Kubernetes resources.
      • name
        Type: STRING
        Provider name: name
        Description: Optional. The name of the Kubernetes resource.
      • namespace
        Type: STRING
        Provider name: namespace
        Description: Optional. The Namespace of the Kubernetes resource.

volumes_restored_count

Type: INT32
Provider name: volumesRestoredCount
Description: Output only. Number of volumes restored during the restore execution.