Docs > インフラストラクチャー > Datadog Resource Catalog >

このページは日本語には対応しておりません。随時翻訳に取り組んでいます。
翻訳に関してご質問やご意見ございましたら、お気軽にご連絡ください。

gcp_domains_registration

`ancestors`

Type: UNORDERED_LIST_STRING

`contact_settings`

Type: STRUCT
Provider name: contactSettings
Description: Required. Settings for contact information linked to the Registration. You cannot update these with the UpdateRegistration method. To update these settings, use the ConfigureContactSettings method.

admin_contact
Type: STRUCT
Provider name: adminContact
Description: Required. The administrative contact for the Registration.
- email
  Type: STRING
  Provider name: email
  Description: Required. Email address of the contact.
- fax_number
  Type: STRING
  Provider name: faxNumber
  Description: Fax number of the contact in international format. For example, "+1-800-555-0123".
- phone_number
  Type: STRING
  Provider name: phoneNumber
  Description: Required. Phone number of the contact in international format. For example, "+1-800-555-0123".
- postal_address
  Type: STRUCT
  Provider name: postalAddress
  Description: Required. Postal address of the contact.
  - address_lines
    Type: UNORDERED_LIST_STRING
    Provider name: addressLines
    Description: Unstructured address lines describing the lower levels of an address. Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (For example “Austin, TX”), it is important that the line order is clear. The order of address lines should be “envelope order” for the country/region of the address. In places where this can vary (For example Japan), address_language is used to make it explicit (For example “ja” for large-to-small ordering and “ja-Latn” or “en” for small-to-large). This way, the most specific line of an address can be selected based on the language. The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved. Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).
  - administrative_area
    Type: STRING
    Provider name: administrativeArea
    Description: Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (For example “Barcelona” and not “Catalonia”). Many countries don’t use an administrative area in postal addresses. For example in Switzerland this should be left unpopulated.
  - language_code
    Type: STRING
    Provider name: languageCode
    Description: Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address’ country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations. If this value is not known, it should be omitted (rather than specifying a possibly incorrect default). Examples: “zh-Hant”, “ja”, “ja-Latn”, “en”.
  - locality
    Type: STRING
    Provider name: locality
    Description: Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.
  - organization
    Type: STRING
    Provider name: organization
    Description: Optional. The name of the organization at the address.
  - postal_code
    Type: STRING
    Provider name: postalCode
    Description: Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (For example state/zip validation in the U.S.A.).
  - recipients
    Type: UNORDERED_LIST_STRING
    Provider name: recipients
    Description: Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain “care of” information.
  - region_code
    Type: STRING
    Provider name: regionCode
    Description: Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See https://cldr.unicode.org/ and https://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: “CH” for Switzerland.
  - revision
    Type: INT32
    Provider name: revision
    Description: The schema revision of the PostalAddress. This must be set to 0, which is the latest revision. All new revisions must be backward compatible with old revisions.
  - sorting_code
    Type: STRING
    Provider name: sortingCode
    Description: Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like “CEDEX”, optionally followed by a number (For example “CEDEX 7”), or just a number alone, representing the “sector code” (Jamaica), “delivery area indicator” (Malawi) or “post office indicator” (For example Côte d’Ivoire).
  - sublocality
    Type: STRING
    Provider name: sublocality
    Description: Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.
privacy
Type: STRING
Provider name: privacy
Description: Required. Privacy setting for the contacts associated with the Registration.
Possible values:
- CONTACT_PRIVACY_UNSPECIFIED - The contact privacy settings are undefined.
- PUBLIC_CONTACT_DATA - All the data from ContactSettings is publicly available. When setting this option, you must also provide a PUBLIC_CONTACT_DATA_ACKNOWLEDGEMENT in the contact_notices field of the request.
- PRIVATE_CONTACT_DATA - Deprecated: For more information, see Cloud Domains feature deprecation. None of the data from ContactSettings is publicly available. Instead, proxy contact data is published for your domain. Email sent to the proxy email address is forwarded to the registrant’s email address. Cloud Domains provides this privacy proxy service at no additional cost.
- REDACTED_CONTACT_DATA - The organization name (if provided) and limited non-identifying data from ContactSettings is available to the public (e.g. country and state). The remaining data is marked as REDACTED FOR PRIVACY in the WHOIS database. The actual information redacted depends on the domain. For details, see the registration privacy article.
registrant_contact
Type: STRUCT
Provider name: registrantContact
Description: Required. The registrant contact for the Registration. Caution: Anyone with access to this email address, phone number, and/or postal address can take control of the domain. Warning: For new Registrations, the registrant receives an email confirmation that they must complete within 15 days to avoid domain suspension.
- email
  Type: STRING
  Provider name: email
  Description: Required. Email address of the contact.
- fax_number
  Type: STRING
  Provider name: faxNumber
  Description: Fax number of the contact in international format. For example, "+1-800-555-0123".
- phone_number
  Type: STRING
  Provider name: phoneNumber
  Description: Required. Phone number of the contact in international format. For example, "+1-800-555-0123".
- postal_address
  Type: STRUCT
  Provider name: postalAddress
  Description: Required. Postal address of the contact.
  - address_lines
    Type: UNORDERED_LIST_STRING
    Provider name: addressLines
    Description: Unstructured address lines describing the lower levels of an address. Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (For example “Austin, TX”), it is important that the line order is clear. The order of address lines should be “envelope order” for the country/region of the address. In places where this can vary (For example Japan), address_language is used to make it explicit (For example “ja” for large-to-small ordering and “ja-Latn” or “en” for small-to-large). This way, the most specific line of an address can be selected based on the language. The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved. Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).
  - administrative_area
    Type: STRING
    Provider name: administrativeArea
    Description: Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (For example “Barcelona” and not “Catalonia”). Many countries don’t use an administrative area in postal addresses. For example in Switzerland this should be left unpopulated.
  - language_code
    Type: STRING
    Provider name: languageCode
    Description: Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address’ country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations. If this value is not known, it should be omitted (rather than specifying a possibly incorrect default). Examples: “zh-Hant”, “ja”, “ja-Latn”, “en”.
  - locality
    Type: STRING
    Provider name: locality
    Description: Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.
  - organization
    Type: STRING
    Provider name: organization
    Description: Optional. The name of the organization at the address.
  - postal_code
    Type: STRING
    Provider name: postalCode
    Description: Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (For example state/zip validation in the U.S.A.).
  - recipients
    Type: UNORDERED_LIST_STRING
    Provider name: recipients
    Description: Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain “care of” information.
  - region_code
    Type: STRING
    Provider name: regionCode
    Description: Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See https://cldr.unicode.org/ and https://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: “CH” for Switzerland.
  - revision
    Type: INT32
    Provider name: revision
    Description: The schema revision of the PostalAddress. This must be set to 0, which is the latest revision. All new revisions must be backward compatible with old revisions.
  - sorting_code
    Type: STRING
    Provider name: sortingCode
    Description: Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like “CEDEX”, optionally followed by a number (For example “CEDEX 7”), or just a number alone, representing the “sector code” (Jamaica), “delivery area indicator” (Malawi) or “post office indicator” (For example Côte d’Ivoire).
  - sublocality
    Type: STRING
    Provider name: sublocality
    Description: Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.
technical_contact
Type: STRUCT
Provider name: technicalContact
Description: Required. The technical contact for the Registration.
- email
  Type: STRING
  Provider name: email
  Description: Required. Email address of the contact.
- fax_number
  Type: STRING
  Provider name: faxNumber
  Description: Fax number of the contact in international format. For example, "+1-800-555-0123".
- phone_number
  Type: STRING
  Provider name: phoneNumber
  Description: Required. Phone number of the contact in international format. For example, "+1-800-555-0123".
- postal_address
  Type: STRUCT
  Provider name: postalAddress
  Description: Required. Postal address of the contact.
  - address_lines
    Type: UNORDERED_LIST_STRING
    Provider name: addressLines
    Description: Unstructured address lines describing the lower levels of an address. Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (For example “Austin, TX”), it is important that the line order is clear. The order of address lines should be “envelope order” for the country/region of the address. In places where this can vary (For example Japan), address_language is used to make it explicit (For example “ja” for large-to-small ordering and “ja-Latn” or “en” for small-to-large). This way, the most specific line of an address can be selected based on the language. The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved. Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).
  - administrative_area
    Type: STRING
    Provider name: administrativeArea
    Description: Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (For example “Barcelona” and not “Catalonia”). Many countries don’t use an administrative area in postal addresses. For example in Switzerland this should be left unpopulated.
  - language_code
    Type: STRING
    Provider name: languageCode
    Description: Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address’ country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations. If this value is not known, it should be omitted (rather than specifying a possibly incorrect default). Examples: “zh-Hant”, “ja”, “ja-Latn”, “en”.
  - locality
    Type: STRING
    Provider name: locality
    Description: Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.
  - organization
    Type: STRING
    Provider name: organization
    Description: Optional. The name of the organization at the address.
  - postal_code
    Type: STRING
    Provider name: postalCode
    Description: Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (For example state/zip validation in the U.S.A.).
  - recipients
    Type: UNORDERED_LIST_STRING
    Provider name: recipients
    Description: Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain “care of” information.
  - region_code
    Type: STRING
    Provider name: regionCode
    Description: Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See https://cldr.unicode.org/ and https://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: “CH” for Switzerland.
  - revision
    Type: INT32
    Provider name: revision
    Description: The schema revision of the PostalAddress. This must be set to 0, which is the latest revision. All new revisions must be backward compatible with old revisions.
  - sorting_code
    Type: STRING
    Provider name: sortingCode
    Description: Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like “CEDEX”, optionally followed by a number (For example “CEDEX 7”), or just a number alone, representing the “sector code” (Jamaica), “delivery area indicator” (Malawi) or “post office indicator” (For example Côte d’Ivoire).
  - sublocality
    Type: STRING
    Provider name: sublocality
    Description: Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.

`create_time`

Type: TIMESTAMP
Provider name: createTime
Description: Output only. The creation timestamp of the Registration resource.

`dns_settings`

Type: STRUCT
Provider name: dnsSettings
Description: Settings controlling the DNS configuration of the Registration. You cannot update these with the UpdateRegistration method. To update these settings, use the ConfigureDnsSettings method.

custom_dns
Type: STRUCT
Provider name: customDns
Description: An arbitrary DNS provider identified by its name servers.
- ds_records
  Type: UNORDERED_LIST_STRUCT
  Provider name: dsRecords
  Description: The list of DS records for this domain, which are used to enable DNSSEC. The domain’s DNS provider can provide the values to set here. If this field is empty, DNSSEC is disabled.
  - algorithm
    Type: STRING
    Provider name: algorithm
    Description: The algorithm used to generate the referenced DNSKEY.
    Possible values:
    - ALGORITHM_UNSPECIFIED - The algorithm is unspecified.
    - RSAMD5 - RSA/MD5. Cannot be used for new deployments.
    - DH - Diffie-Hellman. Cannot be used for new deployments.
    - DSA - DSA/SHA1. Not recommended for new deployments.
    - ECC - ECC. Not recommended for new deployments.
    - RSASHA1 - RSA/SHA-1. Not recommended for new deployments.
    - DSANSEC3SHA1 - DSA-NSEC3-SHA1. Not recommended for new deployments.
    - RSASHA1NSEC3SHA1 - RSA/SHA1-NSEC3-SHA1. Not recommended for new deployments.
    - RSASHA256 - RSA/SHA-256.
    - RSASHA512 - RSA/SHA-512.
    - ECCGOST - GOST R 34.10-2001.
    - ECDSAP256SHA256 - ECDSA Curve P-256 with SHA-256.
    - ECDSAP384SHA384 - ECDSA Curve P-384 with SHA-384.
    - ED25519 - Ed25519.
    - ED448 - Ed448.
    - INDIRECT - Reserved for Indirect Keys. Cannot be used for new deployments.
    - PRIVATEDNS - Private algorithm. Cannot be used for new deployments.
    - PRIVATEOID - Private algorithm OID. Cannot be used for new deployments.
  - digest
    Type: STRING
    Provider name: digest
    Description: The digest generated from the referenced DNSKEY.
  - digest_type
    Type: STRING
    Provider name: digestType
    Description: The hash function used to generate the digest of the referenced DNSKEY.
    Possible values:
    - DIGEST_TYPE_UNSPECIFIED - The DigestType is unspecified.
    - SHA1 - SHA-1. Not recommended for new deployments.
    - SHA256 - SHA-256.
    - GOST3411 - GOST R 34.11-94.
    - SHA384 - SHA-384.
  - key_tag
    Type: INT32
    Provider name: keyTag
    Description: The key tag of the record. Must be set in range 0 – 65535.
- name_servers
  Type: UNORDERED_LIST_STRING
  Provider name: nameServers
  Description: Required. A list of name servers that store the DNS zone for this domain. Each name server is a domain name, with Unicode domain names expressed in Punycode format.
glue_records
Type: UNORDERED_LIST_STRUCT
Provider name: glueRecords
Description: The list of glue records for this Registration. Commonly empty.
- host_name
  Type: STRING
  Provider name: hostName
  Description: Required. Domain name of the host in Punycode format.
- ipv4_addresses
  Type: UNORDERED_LIST_STRING
  Provider name: ipv4Addresses
  Description: List of IPv4 addresses corresponding to this host in the standard decimal format (e.g. 198.51.100.1). At least one of ipv4_address and ipv6_address must be set.
- ipv6_addresses
  Type: UNORDERED_LIST_STRING
  Provider name: ipv6Addresses
  Description: List of IPv6 addresses corresponding to this host in the standard hexadecimal format (e.g. 2001:db8::). At least one of ipv4_address and ipv6_address must be set.
google_domains_dns
Type: STRUCT
Provider name: googleDomainsDns
Description: Deprecated: For more information, see Cloud Domains feature deprecation. The free DNS zone provided by Google Domains.
- ds_records
  Type: UNORDERED_LIST_STRUCT
  Provider name: dsRecords
  Description: Output only. The list of DS records published for this domain. The list is automatically populated when ds_state is DS_RECORDS_PUBLISHED, otherwise it remains empty.
  - algorithm
    Type: STRING
    Provider name: algorithm
    Description: The algorithm used to generate the referenced DNSKEY.
    Possible values:
    - ALGORITHM_UNSPECIFIED - The algorithm is unspecified.
    - RSAMD5 - RSA/MD5. Cannot be used for new deployments.
    - DH - Diffie-Hellman. Cannot be used for new deployments.
    - DSA - DSA/SHA1. Not recommended for new deployments.
    - ECC - ECC. Not recommended for new deployments.
    - RSASHA1 - RSA/SHA-1. Not recommended for new deployments.
    - DSANSEC3SHA1 - DSA-NSEC3-SHA1. Not recommended for new deployments.
    - RSASHA1NSEC3SHA1 - RSA/SHA1-NSEC3-SHA1. Not recommended for new deployments.
    - RSASHA256 - RSA/SHA-256.
    - RSASHA512 - RSA/SHA-512.
    - ECCGOST - GOST R 34.10-2001.
    - ECDSAP256SHA256 - ECDSA Curve P-256 with SHA-256.
    - ECDSAP384SHA384 - ECDSA Curve P-384 with SHA-384.
    - ED25519 - Ed25519.
    - ED448 - Ed448.
    - INDIRECT - Reserved for Indirect Keys. Cannot be used for new deployments.
    - PRIVATEDNS - Private algorithm. Cannot be used for new deployments.
    - PRIVATEOID - Private algorithm OID. Cannot be used for new deployments.
  - digest
    Type: STRING
    Provider name: digest
    Description: The digest generated from the referenced DNSKEY.
  - digest_type
    Type: STRING
    Provider name: digestType
    Description: The hash function used to generate the digest of the referenced DNSKEY.
    Possible values:
    - DIGEST_TYPE_UNSPECIFIED - The DigestType is unspecified.
    - SHA1 - SHA-1. Not recommended for new deployments.
    - SHA256 - SHA-256.
    - GOST3411 - GOST R 34.11-94.
    - SHA384 - SHA-384.
  - key_tag
    Type: INT32
    Provider name: keyTag
    Description: The key tag of the record. Must be set in range 0 – 65535.
- ds_state
  Type: STRING
  Provider name: dsState
  Description: Required. The state of DS records for this domain. Used to enable or disable automatic DNSSEC.
  Possible values:
  - DS_STATE_UNSPECIFIED - DS state is unspecified.
  - DS_RECORDS_UNPUBLISHED - DNSSEC is disabled for this domain. No DS records for this domain are published in the parent DNS zone.
  - DS_RECORDS_PUBLISHED - DNSSEC is enabled for this domain. Appropriate DS records for this domain are published in the parent DNS zone. This option is valid only if the DNS zone referenced in the Registration’s dns_provider field is already DNSSEC-signed.
- name_servers
  Type: UNORDERED_LIST_STRING
  Provider name: nameServers
  Description: Output only. A list of name servers that store the DNS zone for this domain. Each name server is a domain name, with Unicode domain names expressed in Punycode format. This field is automatically populated with the name servers assigned to the Google Domains DNS zone.
google_domains_redirects_data_available
Type: BOOLEAN
Provider name: googleDomainsRedirectsDataAvailable
Description: Output only. Indicates if this Registration has configured one of the following deprecated Google Domains DNS features: * Domain forwarding (HTTP 301 and 302 response status codes), * Email forwarding. See https://cloud.google.com/domains/docs/deprecations/feature-deprecations for more details. If any of these features is enabled call the RetrieveGoogleDomainsForwardingConfig method to get details about the feature’s configuration. A forwarding configuration might not work correctly if required DNS records are not present in the domain’s authoritative DNS Zone.

`domain_name`

Type: STRING
Provider name: domainName
Description: Required. Immutable. The domain name. Unicode domain names must be expressed in Punycode format.

`domain_properties`

Type: UNORDERED_LIST_STRING
Provider name: domainProperties
Description: Output only. Special properties of the domain.

`expire_time`

Type: TIMESTAMP
Provider name: expireTime
Description: Output only. The expiration timestamp of the Registration.

`issues`

Type: UNORDERED_LIST_STRING
Provider name: issues
Description: Output only. The set of issues with the Registration that require attention.

`labels`

Type: UNORDERED_LIST_STRING

`management_settings`

Type: STRUCT
Provider name: managementSettings
Description: Settings for management of the Registration, including renewal, billing, and transfer. You cannot update these with the UpdateRegistration method. To update these settings, use the ConfigureManagementSettings method.

effective_transfer_lock_state
Type: STRING
Provider name: effectiveTransferLockState
Description: Output only. The actual transfer lock state for this Registration.
Possible values:
- TRANSFER_LOCK_STATE_UNSPECIFIED - The state is unspecified.
- UNLOCKED - The domain is unlocked and can be transferred to another registrar.
- LOCKED - The domain is locked and cannot be transferred to another registrar.
preferred_renewal_method
Type: STRING
Provider name: preferredRenewalMethod
Description: Optional. The desired renewal method for this Registration. The actual renewal_method is automatically updated to reflect this choice. If unset or equal to RENEWAL_METHOD_UNSPECIFIED, the actual renewalMethod is treated as if it were set to AUTOMATIC_RENEWAL. You cannot use RENEWAL_DISABLED during resource creation, and you can update the renewal status only when the Registration resource has state ACTIVE or SUSPENDED. When preferred_renewal_method is set to AUTOMATIC_RENEWAL, the actual renewal_method can be set to RENEWAL_DISABLED in case of problems with the billing account or reported domain abuse. In such cases, check the issues field on the Registration. After the problem is resolved, the renewal_method is automatically updated to preferred_renewal_method in a few hours.
Possible values:
- RENEWAL_METHOD_UNSPECIFIED - The renewal method is undefined.
- AUTOMATIC_RENEWAL - The domain is automatically renewed each year.
- MANUAL_RENEWAL - Deprecated: For more information, see Cloud Domains feature deprecation. This option was never used. Use RENEWAL_DISABLED instead.
- RENEWAL_DISABLED - The domain won’t be renewed and will expire at its expiration time.
renewal_method
Type: STRING
Provider name: renewalMethod
Description: Output only. The actual renewal method for this Registration. When preferred_renewal_method is set to AUTOMATIC_RENEWAL, the actual renewal_method can be equal to RENEWAL_DISABLED—for example, when there are problems with the billing account or reported domain abuse. In such cases, check the issues field on the Registration. After the problem is resolved, the renewal_method is automatically updated to preferred_renewal_method in a few hours.
Possible values:
- RENEWAL_METHOD_UNSPECIFIED - The renewal method is undefined.
- AUTOMATIC_RENEWAL - The domain is automatically renewed each year.
- MANUAL_RENEWAL - Deprecated: For more information, see Cloud Domains feature deprecation. This option was never used. Use RENEWAL_DISABLED instead.
- RENEWAL_DISABLED - The domain won’t be renewed and will expire at its expiration time.
transfer_lock_state
Type: STRING
Provider name: transferLockState
Description: This is the desired transfer lock state for this Registration. A transfer lock controls whether the domain can be transferred to another registrar. The transfer lock state of the domain is returned in the effective_transfer_lock_state property. The transfer lock state values might be different for the following reasons: * transfer_lock_state was updated only a short time ago. * Domains with the TRANSFER_LOCK_UNSUPPORTED_BY_REGISTRY state are in the list of domain_properties. These domains are always in the UNLOCKED state.
Possible values:
- TRANSFER_LOCK_STATE_UNSPECIFIED - The state is unspecified.
- UNLOCKED - The domain is unlocked and can be transferred to another registrar.
- LOCKED - The domain is locked and cannot be transferred to another registrar.

`name`

Type: STRING
Provider name: name
Description: Output only. Name of the Registration resource, in the format projects/*/locations/*/registrations/.

`organization_id`

Type: STRING

`parent`

Type: STRING

`pending_contact_settings`

Type: STRUCT
Provider name: pendingContactSettings
Description: Output only. Pending contact settings for the Registration. Updates to the contact_settings field that change its registrant_contact or privacy fields require email confirmation by the registrant_contact before taking effect. This field is set only if there are pending updates to the contact_settings that have not been confirmed. To confirm the changes, the registrant_contact must follow the instructions in the email they receive.

admin_contact
Type: STRUCT
Provider name: adminContact
Description: Required. The administrative contact for the Registration.
- email
  Type: STRING
  Provider name: email
  Description: Required. Email address of the contact.
- fax_number
  Type: STRING
  Provider name: faxNumber
  Description: Fax number of the contact in international format. For example, "+1-800-555-0123".
- phone_number
  Type: STRING
  Provider name: phoneNumber
  Description: Required. Phone number of the contact in international format. For example, "+1-800-555-0123".
- postal_address
  Type: STRUCT
  Provider name: postalAddress
  Description: Required. Postal address of the contact.
  - address_lines
    Type: UNORDERED_LIST_STRING
    Provider name: addressLines
    Description: Unstructured address lines describing the lower levels of an address. Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (For example “Austin, TX”), it is important that the line order is clear. The order of address lines should be “envelope order” for the country/region of the address. In places where this can vary (For example Japan), address_language is used to make it explicit (For example “ja” for large-to-small ordering and “ja-Latn” or “en” for small-to-large). This way, the most specific line of an address can be selected based on the language. The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved. Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).
  - administrative_area
    Type: STRING
    Provider name: administrativeArea
    Description: Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (For example “Barcelona” and not “Catalonia”). Many countries don’t use an administrative area in postal addresses. For example in Switzerland this should be left unpopulated.
  - language_code
    Type: STRING
    Provider name: languageCode
    Description: Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address’ country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations. If this value is not known, it should be omitted (rather than specifying a possibly incorrect default). Examples: “zh-Hant”, “ja”, “ja-Latn”, “en”.
  - locality
    Type: STRING
    Provider name: locality
    Description: Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.
  - organization
    Type: STRING
    Provider name: organization
    Description: Optional. The name of the organization at the address.
  - postal_code
    Type: STRING
    Provider name: postalCode
    Description: Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (For example state/zip validation in the U.S.A.).
  - recipients
    Type: UNORDERED_LIST_STRING
    Provider name: recipients
    Description: Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain “care of” information.
  - region_code
    Type: STRING
    Provider name: regionCode
    Description: Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See https://cldr.unicode.org/ and https://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: “CH” for Switzerland.
  - revision
    Type: INT32
    Provider name: revision
    Description: The schema revision of the PostalAddress. This must be set to 0, which is the latest revision. All new revisions must be backward compatible with old revisions.
  - sorting_code
    Type: STRING
    Provider name: sortingCode
    Description: Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like “CEDEX”, optionally followed by a number (For example “CEDEX 7”), or just a number alone, representing the “sector code” (Jamaica), “delivery area indicator” (Malawi) or “post office indicator” (For example Côte d’Ivoire).
  - sublocality
    Type: STRING
    Provider name: sublocality
    Description: Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.
privacy
Type: STRING
Provider name: privacy
Description: Required. Privacy setting for the contacts associated with the Registration.
Possible values:
- CONTACT_PRIVACY_UNSPECIFIED - The contact privacy settings are undefined.
- PUBLIC_CONTACT_DATA - All the data from ContactSettings is publicly available. When setting this option, you must also provide a PUBLIC_CONTACT_DATA_ACKNOWLEDGEMENT in the contact_notices field of the request.
- PRIVATE_CONTACT_DATA - Deprecated: For more information, see Cloud Domains feature deprecation. None of the data from ContactSettings is publicly available. Instead, proxy contact data is published for your domain. Email sent to the proxy email address is forwarded to the registrant’s email address. Cloud Domains provides this privacy proxy service at no additional cost.
- REDACTED_CONTACT_DATA - The organization name (if provided) and limited non-identifying data from ContactSettings is available to the public (e.g. country and state). The remaining data is marked as REDACTED FOR PRIVACY in the WHOIS database. The actual information redacted depends on the domain. For details, see the registration privacy article.
registrant_contact
Type: STRUCT
Provider name: registrantContact
Description: Required. The registrant contact for the Registration. Caution: Anyone with access to this email address, phone number, and/or postal address can take control of the domain. Warning: For new Registrations, the registrant receives an email confirmation that they must complete within 15 days to avoid domain suspension.
- email
  Type: STRING
  Provider name: email
  Description: Required. Email address of the contact.
- fax_number
  Type: STRING
  Provider name: faxNumber
  Description: Fax number of the contact in international format. For example, "+1-800-555-0123".
- phone_number
  Type: STRING
  Provider name: phoneNumber
  Description: Required. Phone number of the contact in international format. For example, "+1-800-555-0123".
- postal_address
  Type: STRUCT
  Provider name: postalAddress
  Description: Required. Postal address of the contact.
  - address_lines
    Type: UNORDERED_LIST_STRING
    Provider name: addressLines
    Description: Unstructured address lines describing the lower levels of an address. Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (For example “Austin, TX”), it is important that the line order is clear. The order of address lines should be “envelope order” for the country/region of the address. In places where this can vary (For example Japan), address_language is used to make it explicit (For example “ja” for large-to-small ordering and “ja-Latn” or “en” for small-to-large). This way, the most specific line of an address can be selected based on the language. The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved. Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).
  - administrative_area
    Type: STRING
    Provider name: administrativeArea
    Description: Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (For example “Barcelona” and not “Catalonia”). Many countries don’t use an administrative area in postal addresses. For example in Switzerland this should be left unpopulated.
  - language_code
    Type: STRING
    Provider name: languageCode
    Description: Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address’ country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations. If this value is not known, it should be omitted (rather than specifying a possibly incorrect default). Examples: “zh-Hant”, “ja”, “ja-Latn”, “en”.
  - locality
    Type: STRING
    Provider name: locality
    Description: Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.
  - organization
    Type: STRING
    Provider name: organization
    Description: Optional. The name of the organization at the address.
  - postal_code
    Type: STRING
    Provider name: postalCode
    Description: Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (For example state/zip validation in the U.S.A.).
  - recipients
    Type: UNORDERED_LIST_STRING
    Provider name: recipients
    Description: Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain “care of” information.
  - region_code
    Type: STRING
    Provider name: regionCode
    Description: Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See https://cldr.unicode.org/ and https://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: “CH” for Switzerland.
  - revision
    Type: INT32
    Provider name: revision
    Description: The schema revision of the PostalAddress. This must be set to 0, which is the latest revision. All new revisions must be backward compatible with old revisions.
  - sorting_code
    Type: STRING
    Provider name: sortingCode
    Description: Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like “CEDEX”, optionally followed by a number (For example “CEDEX 7”), or just a number alone, representing the “sector code” (Jamaica), “delivery area indicator” (Malawi) or “post office indicator” (For example Côte d’Ivoire).
  - sublocality
    Type: STRING
    Provider name: sublocality
    Description: Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.
technical_contact
Type: STRUCT
Provider name: technicalContact
Description: Required. The technical contact for the Registration.
- email
  Type: STRING
  Provider name: email
  Description: Required. Email address of the contact.
- fax_number
  Type: STRING
  Provider name: faxNumber
  Description: Fax number of the contact in international format. For example, "+1-800-555-0123".
- phone_number
  Type: STRING
  Provider name: phoneNumber
  Description: Required. Phone number of the contact in international format. For example, "+1-800-555-0123".
- postal_address
  Type: STRUCT
  Provider name: postalAddress
  Description: Required. Postal address of the contact.
  - address_lines
    Type: UNORDERED_LIST_STRING
    Provider name: addressLines
    Description: Unstructured address lines describing the lower levels of an address. Because values in address_lines do not have type information and may sometimes contain multiple values in a single field (For example “Austin, TX”), it is important that the line order is clear. The order of address lines should be “envelope order” for the country/region of the address. In places where this can vary (For example Japan), address_language is used to make it explicit (For example “ja” for large-to-small ordering and “ja-Latn” or “en” for small-to-large). This way, the most specific line of an address can be selected based on the language. The minimum permitted structural representation of an address consists of a region_code with all remaining information placed in the address_lines. It would be possible to format such an address very approximately without geocoding, but no semantic reasoning could be made about any of the address components until it was at least partially resolved. Creating an address only containing a region_code and address_lines, and then geocoding is the recommended way to handle completely unstructured addresses (as opposed to guessing which parts of the address should be localities or administrative areas).
  - administrative_area
    Type: STRING
    Provider name: administrativeArea
    Description: Optional. Highest administrative subdivision which is used for postal addresses of a country or region. For example, this can be a state, a province, an oblast, or a prefecture. Specifically, for Spain this is the province and not the autonomous community (For example “Barcelona” and not “Catalonia”). Many countries don’t use an administrative area in postal addresses. For example in Switzerland this should be left unpopulated.
  - language_code
    Type: STRING
    Provider name: languageCode
    Description: Optional. BCP-47 language code of the contents of this address (if known). This is often the UI language of the input form or is expected to match one of the languages used in the address’ country/region, or their transliterated equivalents. This can affect formatting in certain countries, but is not critical to the correctness of the data and will never affect any validation or other non-formatting related operations. If this value is not known, it should be omitted (rather than specifying a possibly incorrect default). Examples: “zh-Hant”, “ja”, “ja-Latn”, “en”.
  - locality
    Type: STRING
    Provider name: locality
    Description: Optional. Generally refers to the city/town portion of the address. Examples: US city, IT comune, UK post town. In regions of the world where localities are not well defined or do not fit into this structure well, leave locality empty and use address_lines.
  - organization
    Type: STRING
    Provider name: organization
    Description: Optional. The name of the organization at the address.
  - postal_code
    Type: STRING
    Provider name: postalCode
    Description: Optional. Postal code of the address. Not all countries use or require postal codes to be present, but where they are used, they may trigger additional validation with other parts of the address (For example state/zip validation in the U.S.A.).
  - recipients
    Type: UNORDERED_LIST_STRING
    Provider name: recipients
    Description: Optional. The recipient at the address. This field may, under certain circumstances, contain multiline information. For example, it might contain “care of” information.
  - region_code
    Type: STRING
    Provider name: regionCode
    Description: Required. CLDR region code of the country/region of the address. This is never inferred and it is up to the user to ensure the value is correct. See https://cldr.unicode.org/ and https://www.unicode.org/cldr/charts/30/supplemental/territory_information.html for details. Example: “CH” for Switzerland.
  - revision
    Type: INT32
    Provider name: revision
    Description: The schema revision of the PostalAddress. This must be set to 0, which is the latest revision. All new revisions must be backward compatible with old revisions.
  - sorting_code
    Type: STRING
    Provider name: sortingCode
    Description: Optional. Additional, country-specific, sorting code. This is not used in most regions. Where it is used, the value is either a string like “CEDEX”, optionally followed by a number (For example “CEDEX 7”), or just a number alone, representing the “sector code” (Jamaica), “delivery area indicator” (Malawi) or “post office indicator” (For example Côte d’Ivoire).
  - sublocality
    Type: STRING
    Provider name: sublocality
    Description: Optional. Sublocality of the address. For example, this can be neighborhoods, boroughs, districts.

`project_id`

Type: STRING

`project_number`

Type: STRING

`register_failure_reason`

Type: STRING
Provider name: registerFailureReason
Description: Output only. The reason the domain registration failed. Only set for domains in REGISTRATION_FAILED state.
Possible values:

REGISTER_FAILURE_REASON_UNSPECIFIED - Register failure unspecified.
REGISTER_FAILURE_REASON_UNKNOWN - Registration failed for an unknown reason.
DOMAIN_NOT_AVAILABLE - The domain is not available for registration.
INVALID_CONTACTS - The provided contact information was rejected.

`resource_name`

Type: STRING

`state`

Type: STRING
Provider name: state
Description: Output only. The state of the Registration
Possible values:

STATE_UNSPECIFIED - The state is undefined.
REGISTRATION_PENDING - The domain is being registered.
REGISTRATION_FAILED - The domain registration failed. You can delete resources in this state to allow registration to be retried.
TRANSFER_PENDING - The domain is being transferred from another registrar to Cloud Domains.
TRANSFER_FAILED - The attempt to transfer the domain from another registrar to Cloud Domains failed. You can delete resources in this state and retry the transfer.
IMPORT_PENDING - The domain is being imported from Google Domains to Cloud Domains.
ACTIVE - The domain is registered and operational. The domain renews automatically as long as it remains in this state and the RenewalMethod is set to AUTOMATIC_RENEWAL.
SUSPENDED - The domain is suspended and inoperative. For more details, see the issues field.
EXPORTED - The domain is no longer managed with Cloud Domains. It may have been transferred to another registrar or exported for management in Google Domains. You can no longer update it with this API, and information shown about it may be stale. Domains in this state are not automatically renewed by Cloud Domains.
EXPIRED - The domain is expired.

`supported_privacy`

Type: UNORDERED_LIST_STRING
Provider name: supportedPrivacy
Description: Output only. Set of options for the contact_settings.privacy field that this Registration supports.

`tags`

Type: UNORDERED_LIST_STRING

`transfer_failure_reason`

Type: STRING
Provider name: transferFailureReason
Description: Output only. Deprecated: For more information, see Cloud Domains feature deprecation. The reason the domain transfer failed. Only set for domains in TRANSFER_FAILED state.
Possible values:

TRANSFER_FAILURE_REASON_UNSPECIFIED - Transfer failure unspecified.
TRANSFER_FAILURE_REASON_UNKNOWN - Transfer failed for an unknown reason.
EMAIL_CONFIRMATION_FAILURE - An email confirmation sent to the user was rejected or expired.
DOMAIN_NOT_REGISTERED - The domain is available for registration.
DOMAIN_HAS_TRANSFER_LOCK - The domain has a transfer lock with its current registrar which must be removed prior to transfer.
INVALID_AUTHORIZATION_CODE - The authorization code entered is not valid.
TRANSFER_CANCELLED - The transfer was cancelled by the domain owner, current registrar, or TLD registry.
TRANSFER_REJECTED - The transfer was rejected by the current registrar. Contact the current registrar for more information.
INVALID_REGISTRANT_EMAIL_ADDRESS - The registrant email address cannot be parsed from the domain’s current public contact data.
DOMAIN_NOT_ELIGIBLE_FOR_TRANSFER - The domain is not eligible for transfer due requirements imposed by the current registrar or TLD registry.
TRANSFER_ALREADY_PENDING - Another transfer is already pending for this domain. The existing transfer attempt must expire or be cancelled in order to proceed.