Dual Shipping

このページは日本語には対応しておりません。随時翻訳に取り組んでいます。翻訳に関してご質問やご意見ございましたら、お気軽にご連絡ください。
Dual shipping can impact billing if you are sending data to multiple Datadog organizations. For more information about the impact of this configuration, contact Datadog Support.

Overview

If you wish to send data to more than one destination, such as a second Datadog organization, you can configure the Agent to send data to additional endpoints. To set up the Agent to send different kinds of data to multiple endpoints or API keys, use the configurations below.

For a full list of network traffic destinations, see Network Traffic.

Metrics and service checks

You can add the YAML configuration to your datadog.yaml or launch the Agent with the appropriate environment variables.

YAML configuration

Requires Agent version >= 6.17 or 7.17.

In datadog.yaml:

additional_endpoints:
  "https://app.datadoghq.com":
  - apikey2
  - apikey3
  "https://app.datadoghq.eu":
  - apikey4

Environment variable configuration

Requires Agent version >= 6.18 or 7.18.

DD_ADDITIONAL_ENDPOINTS='{\"https://app.datadoghq.com\": [\"apikey2\", \"apikey3\"], \"https://app.datadoghq.eu\": [\"apikey4\"]}'

APM

YAML configuration

Requires Agent version >= 6.7.0.

In datadog.yaml:

apm_config:
  [...]
  additional_endpoints:
    "https://trace.agent.datadoghq.com":
    - apikey2
    - apikey3
    "https://trace.agent.datadoghq.eu":
    - apikey4

Environment variable configuration

Requires Agent version >= 6.19 or 7.19.

DD_APM_ADDITIONAL_ENDPOINTS='{\"https://trace.agent.datadoghq.com\": [\"apikey2\", \"apikey3\"], \"https://trace.agent.datadoghq.eu\": [\"apikey4\"]}'

Continuous Profiler

YAML configuration

Requires Agent version >= 6.7.0.

In datadog.yaml:

apm_config:
  [...]
  profiling_additional_endpoints:
    "https://intake.profile.datadoghq.com/api/v2/profile":
    - apikey2
    - apikey3
    "https://intake.profile.datadoghq.eu/api/v2/profile":
    - apikey4

Environment variable configuration

Requires Agent version >= 6.19 or 7.19.

DD_APM_PROFILING_ADDITIONAL_ENDPOINTS='{\"https://intake.profile.datadoghq.com/api/v2/profile\": [\"apikey2\", \"apikey3\"], \"https://intake.profile.datadoghq.eu/api/v2/profile\": [\"apikey4\"]}'

Note: Uploads to additional endpoints for the Continuous Profiler product are done through best-effort delivery.

  • The main endpoint has the highest priority. Uploads to additional endpoints are only handled after uploads to the main endpoint have completed successfully.
  • Responses from additional endpoints are not forwarded back to the profiler. Any errors during delivery to additional endpoints are logged in the Agent error logs.

Live Processes

YAML configuration

Requires Agent version >= 6.4.0.

In datadog.yaml:

process_config:
  [...]
  additional_endpoints:
    "https://process.datadoghq.com":
    - apikey2
    - apikey3
    "https://process.datadoghq.eu":
    - apikey4

Environment variable configuration

Requires Agent version >= 6.20 or 7.20.

DD_PROCESS_ADDITIONAL_ENDPOINTS='{\"https://process.datadoghq.com\": [\"apikey2\", \"apikey3\"], \"https://process.datadoghq.eu\": [\"apikey4\"]}'

Cluster Agent metrics

Configure the Agent to send Cluster Agent metrics, such as Kubernetes State Metrics Core, to additional endpoints.

HELM configuration

In Datadog values.yaml:

clusterAgent:
  env:
    - name: DD_ADDITIONAL_ENDPOINTS
      value: '{"https://app.datadoghq.com": ["apikey2"]}'

Cluster Agent metrics provider

To ensure autoscaling is resilient to failure, configure the Cluster Agent to run your metric queries for the HPA against your multiple Datadog regions with dual-shipped data. Configure the Datadog Cluster Agent manifest with several endpoints:

cluster-agent-deployment.yaml

external_metrics_provider:
  endpoints:
  - api_key: <DATADOG_API_KEY>
    app_key: <DATADOG_APP_KEY>
    url: https://app.datadoghq.eu
  - api_key: <DATADOG_API_KEY>
    app_key: <DATADOG_APP_KEY>
    url: https://app.datadoghq.com

Orchestrator

HELM configuration

In Datadog values.yaml:

agents:
  customAgentConfig:
    process_config:
      additional_endpoints:
        "https://process.datadoghq.com":
        - apikey2
    orchestrator_explorer:
      orchestrator_additional_endpoints:
        "https://orchestrator.datadoghq.com":
        - apikey2

clusterAgent:
...
  datadog_cluster_yaml:
    orchestrator_explorer:
      orchestrator_additional_endpoints:
        "https://orchestrator.ddog-gov.com":
        - apikey2

Environment variable configuration

DD_ORCHESTRATOR_EXPLORER_ORCHESTRATOR_ADDITIONAL_ENDPOINTS='{\"https://orchestrator.datadoghq.com\": [\"apikey2\", \"apikey3\"], \"https://orchestrator.datadoghq.eu\": [\"apikey4\"]}'

CI Visibility

YAML configuration

Requires Agent >= 6.38 or 7.38.

In datadog.yaml:

evp_proxy_config:
  [...]
  additional_endpoints:
    "https://<VERSION>-app.agent.datadoghq.com":
    - apikey2
    - apikey3
    "https://<VERSION>-app.agent.datadoghq.eu":
    - apikey4

Environment variable configuration

DD_EVP_PROXY_CONFIG_ADDITIONAL_ENDPOINTS='{\"https://<VERSION>-app.agent.datadoghq.com\": [\"apikey2\", \"apikey3\"], \"https://<VERSION>-app.agent.datadoghq.eu\": [\"apikey4\"]}'

Logs

TCP requires Agent version >= 6.6.
HTTPS requires Agent version >= 6.13.

YAML configuration

In datadog.yaml:

logs_config:
  force_use_http: true
  additional_endpoints:
  - api_key: "apiKey2"
    Host: "agent-http-intake.logs.datadoghq.com"
    Port: 443
    is_reliable: true

Environment variable configuration

Requires Agent >= 6.18 or 7.18.

DD_LOGS_CONFIG_FORCE_USE_HTTP=true
DD_LOGS_CONFIG_ADDITIONAL_ENDPOINTS="[{\"api_key\": \"apiKey2\", \"Host\": \"agent-http-intake.logs.datadoghq.com\", \"Port\": 443, \"is_reliable\": true}]"

When setting up additional endpoints, you must explicitly set use_http to tell the Agent which transport to use. The same transport configuration is shared among all additional endpoints.

The is_reliable setting (First available in Agent 7.34.0) tells the Agent to treat this endpoint with the same priority as the primary endpoint. The primary endpoint is always reliable. This ensures that data is not missed if a destination becomes unavailable.

For example, if you’re sending data to the main endpoint and an additional endpoint with is_reliable: true, and one endpoint becomes unavailable, data continues to flow to the other endpoint. If both endpoints become unavailable, the Agent stops reading and sending data until at least one endpoint recovers. This ensures all data makes it to at least one reliable endpoint.

The is_reliable setting defaults to true in Agent 7.37.0+. Unreliable endpoints only send data if at least one reliable endpoint is available. You may define multiple additional endpoints with a mixed usage of is_reliable values. Datadog recommends that you use the default is_reliable setting.

You can add the YAML configuration to your datadog.yaml or launch the Agent with the appropriate environment variables.

Database Monitoring

YAML configuration

Requires Agent >= 6.29 or 7.29.

In datadog.yaml:

database_monitoring:
  samples:
    force_use_http: true
    additional_endpoints:
    - api_key: "apiKey2"
      Host: "dbm-metrics-intake.datadoghq.com"
      Port: 443
      is_reliable: true
  activity:
    force_use_http: true
    additional_endpoints:
    - api_key: "apiKey2"
      Host: "dbquery-intake.datadoghq.com"
      Port: 443
      is_reliable: true
  metrics:
    force_use_http: true
    additional_endpoints:
    - api_key: "apiKey2"
      Host: "dbm-metrics-intake.datadoghq.com"
      Port: 443
      is_reliable: true

Environment variable configuration

DD_DATABASE_MONITORING_SAMPLES_USE_HTTP=true
DD_DATABASE_MONITORING_SAMPLES_ADDITIONAL_ENDPOINTS="[{\"api_key\": \"apiKey2\", \"Host\": \"dbm-metrics-intake.datadoghq.com\", \"Port\": 443, \"is_reliable\": true}]"
DD_DATABASE_MONITORING_ACTIVITY_USE_HTTP=true
DD_DATABASE_MONITORING_ACTIVITY_ADDITIONAL_ENDPOINTS="[{\"api_key\": \"apiKey2\", \"Host\": \"dbquery-intake.datadoghq.com\", \"Port\": 443, \"is_reliable\": true}]"
DD_DATABASE_MONITORING_METRICS_USE_HTTP=true
DD_DATABASE_MONITORING_METRICS_ADDITIONAL_ENDPOINTS="[{\"api_key\": \"apiKey2\", \"Host\": \"dbm-metrics-intake.datadoghq.com\", \"Port\": 443, \"is_reliable\": true}]"

When setting up additional endpoints, you must explicitly set use_http to tell the Agent which transport to use. The same transport configuration is shared among all additional endpoints.

The is_reliable setting (First available in Agent 7.34.0) tells the Agent to treat this endpoint with the same priority as the primary endpoint. The primary endpoint is always reliable. This ensures that data is not missed if a destination becomes unavailable.

For example, if you’re sending data to the main endpoint and an additional endpoint with is_reliable: true, and one endpoint becomes unavailable, data continues to flow to the other endpoint. If both endpoints become unavailable, the Agent stops reading and sending data until at least one endpoint recovers. This ensures all data makes it to at least one reliable endpoint.

The is_reliable setting defaults to true in Agent 7.37.0+. Unreliable endpoints only send data if at least one reliable endpoint is available. You may define multiple additional endpoints with a mixed usage of is_reliable values. Datadog recommends that you use the default is_reliable setting.

You can add the YAML configuration to your datadog.yaml or launch the Agent with the appropriate environment variables.

Network Devices

YAML configuration

Requires Agent >= 6.29 or 7.29.

In datadog.yaml:

network_devices:
  metadata:
    force_use_http: true
    additional_endpoints:
    - api_key: "apiKey2"
      Host: "ndm-intake.datadoghq.com"
      Port: 443
      is_reliable: true
  snmp_traps:
    forwarder:
      force_use_http: true
      additional_endpoints:
      - api_key: "apiKey2"
        Host: "ndm-intake.datadoghq.com"
        Port: 443
        is_reliable: true
  netflow:
    forwarder:
      force_use_http: true
      additional_endpoints:
      - api_key: "apiKey2"
        Host: "ndm-intake.datadoghq.com"
        Port: 443
        is_reliable: true

Environment variable configuration

DD_NETWORK_DEVICES_METADATA_USE_HTTP=true
DD_NETWORK_DEVICES_METADATA_ADDITIONAL_ENDPOINTS="[{\"api_key\": \"apiKey2\", \"Host\": \"ndm-intake.datadoghq.com\", \"Port\": 443, \"is_reliable\": true}]"

When setting up additional endpoints, you must explicitly set use_http to tell the Agent which transport to use. The same transport configuration is shared among all additional endpoints.

The is_reliable setting (First available in Agent 7.34.0) tells the Agent to treat this endpoint with the same priority as the primary endpoint. The primary endpoint is always reliable. This ensures that data is not missed if a destination becomes unavailable.

For example, if you’re sending data to the main endpoint and an additional endpoint with is_reliable: true, and one endpoint becomes unavailable, data continues to flow to the other endpoint. If both endpoints become unavailable, the Agent stops reading and sending data until at least one endpoint recovers. This ensures all data makes it to at least one reliable endpoint.

The is_reliable setting defaults to true in Agent 7.37.0+. Unreliable endpoints only send data if at least one reliable endpoint is available. You may define multiple additional endpoints with a mixed usage of is_reliable values. Datadog recommends that you use the default is_reliable setting.

You can add the YAML configuration to your datadog.yaml or launch the Agent with the appropriate environment variables.

Network Path

YAML configuration

Requires Agent >= 6.55 or 7.55.

In datadog.yaml:

network_path:
  forwarder:
    use_http: true
    additional_endpoints:
    - api_key: "apiKey2"
      Host: "netpath-intake.datadoghq.com"
      Port: 443
      is_reliable: true

Environment variable configuration

DD_NETWORK_PATH_FORWARDER_USE_HTTP=true
DD_NETWORK_PATH_FORWARDER_ADDITIONAL_ENDPOINTS="[{\"api_key\": \"apiKey2\", \"Host\": \"netpath-intake.datadoghq.com\", \"Port\": 443, \"is_reliable\": true}]"

When setting up additional endpoints, you must explicitly set use_http to tell the Agent which transport to use. The same transport configuration is shared among all additional endpoints.

The is_reliable setting (First available in Agent 7.34.0) tells the Agent to treat this endpoint with the same priority as the primary endpoint. The primary endpoint is always reliable. This ensures that data is not missed if a destination becomes unavailable.

For example, if you’re sending data to the main endpoint and an additional endpoint with is_reliable: true, and one endpoint becomes unavailable, data continues to flow to the other endpoint. If both endpoints become unavailable, the Agent stops reading and sending data until at least one endpoint recovers. This ensures all data makes it to at least one reliable endpoint.

The is_reliable setting defaults to true in Agent 7.37.0+. Unreliable endpoints only send data if at least one reliable endpoint is available. You may define multiple additional endpoints with a mixed usage of is_reliable values. Datadog recommends that you use the default is_reliable setting.

You can add the YAML configuration to your datadog.yaml or launch the Agent with the appropriate environment variables.

Cloud Security Management Misconfigurations

YAML configuration

In datadog.yaml:

compliance_config:
  endpoints:
    force_use_http: true
    additional_endpoints:
    - api_key: "apiKey2"
      Host: "https://<VERSION>-app.agent.datadoghq.eu"
      Port: 443
      is_reliable: true

Environment variable configuration

DD_COMPLIANCE_CONFIG_ENDPOINTS_USE_HTTP=true
DD_COMPLIANCE_CONFIG_ENDPOINTS_ADDITIONAL_ENDPOINTS="[{\"api_key\": \"apiKey2\", \"Host\": \"https://<VERSION>-app.agent.datadoghq.eu\", \"Port\": 443, \"is_reliable\": true}]"

When setting up additional endpoints, you must explicitly set use_http to tell the Agent which transport to use. The same transport configuration is shared among all additional endpoints.

The is_reliable setting (First available in Agent 7.34.0) tells the Agent to treat this endpoint with the same priority as the primary endpoint. The primary endpoint is always reliable. This ensures that data is not missed if a destination becomes unavailable.

For example, if you’re sending data to the main endpoint and an additional endpoint with is_reliable: true, and one endpoint becomes unavailable, data continues to flow to the other endpoint. If both endpoints become unavailable, the Agent stops reading and sending data until at least one endpoint recovers. This ensures all data makes it to at least one reliable endpoint.

The is_reliable setting defaults to true in Agent 7.37.0+. Unreliable endpoints only send data if at least one reliable endpoint is available. You may define multiple additional endpoints with a mixed usage of is_reliable values. Datadog recommends that you use the default is_reliable setting.

You can add the YAML configuration to your datadog.yaml or launch the Agent with the appropriate environment variables.

Cloud Security Management Threats

YAML configuration

In datadog.yaml:

runtime_security_config:
  endpoints:
    force_use_http: true
    additional_endpoints:
    - api_key: "apiKey2"
      Host: "https://<VERSION>-app.agent.datadoghq.eu"
      Port: 443
      is_reliable: true

Environment variable configuration

DD_RUNTIME_SECURITY_CONFIG_ENDPOINTS_USE_HTTP=true
DD_RUNTIME_SECURITY_CONFIG_ENDPOINTS_ADDITIONAL_ENDPOINTS="[{\"api_key\": \"apiKey2\", \"Host\": \"https://<VERSION>-app.agent.datadoghq.eu\", \"Port\": 443, \"is_reliable\": true}]"

When setting up additional endpoints, you must explicitly set use_http to tell the Agent which transport to use. The same transport configuration is shared among all additional endpoints.

The is_reliable setting (First available in Agent 7.34.0) tells the Agent to treat this endpoint with the same priority as the primary endpoint. The primary endpoint is always reliable. This ensures that data is not missed if a destination becomes unavailable.

For example, if you’re sending data to the main endpoint and an additional endpoint with is_reliable: true, and one endpoint becomes unavailable, data continues to flow to the other endpoint. If both endpoints become unavailable, the Agent stops reading and sending data until at least one endpoint recovers. This ensures all data makes it to at least one reliable endpoint.

The is_reliable setting defaults to true in Agent 7.37.0+. Unreliable endpoints only send data if at least one reliable endpoint is available. You may define multiple additional endpoints with a mixed usage of is_reliable values. Datadog recommends that you use the default is_reliable setting.

You can add the YAML configuration to your datadog.yaml or launch the Agent with the appropriate environment variables.

Dual shipping in Kubernetes

If you’re using the Datadog Agent Helm chart, you can configure these settings with a configmap. In the values.yaml, set useConfigMap: true and add the relevant settings to customAgentConfig.

# agents.useConfigMap -- Configures a configmap to provide the agent configuration. Use this in combination with the `agents.customAgentConfig` parameter.
  useConfigMap:  true

  # agents.customAgentConfig -- Specify custom contents for the datadog agent config (datadog.yaml)
  ## ref: https://docs.datadoghq.com/agent/configuration/agent-configuration-files/?tab=agentv6
  ## ref: https://github.com/DataDog/datadog-agent/blob/main/pkg/config/config_template.yaml
  ## Note the `agents.useConfigMap` needs to be set to `true` for this parameter to be taken into account.
  customAgentConfig:
    additional_endpoints:
      "https://app.datadoghq.com":
      - apikey2
      - apikey3
      "https://app.datadoghq.eu":
      - apikey4

    logs_config:
      force_use_http: true
      additional_endpoints:
      - api_key: "apiKey2"
        Host: "agent-http-intake.logs.datadoghq.com"
        Port: 443
        is_reliable: true

To avoid exposing your API key(s) in clear text inside the ConfigMap, you can also use the environment variable configuration and reference a Kubernetes secret. Here is an example to send metrics to an additional region:

  1. Create a Kubernetes secret with your environment variable configuration value from this guide:
    kubectl create -n <DATADOG AGENT NAMESPACE> secret generic dual-shipping --from-literal metrics='{"https://app.datadoghq.eu": ["apikey4"]}'
    
  2. Use the Helm chart parameters datadog.env or datadog.envFrom to reference this secret in your configuration:
    datadog:
      [...]
      env:
      - name: DD_ADDITIONAL_ENDPOINTS
        valueFrom:
          secretKeyRef:
            name: dual-shipping
            key: metrics
    

If you’re using the Datadog Agent operator, you can set the [key].customConfigurations.[key].configData override key to set these settings. The example below replaces the datadog.yaml configuration file of the node Agent to send metrics and logs to additional regions.

apiVersion: datadoghq.com/v2alpha1
kind: DatadogAgent
metadata:
  name: datadog
spec:
  override:
    nodeAgent:
      customConfigurations:
        datadog.yaml:
          configData: |-
            additional_endpoints:
              "https://app.datadoghq.com":
              - apikey2
              - apikey3
              "https://app.datadoghq.eu":
              - apikey4
            logs_config:
              force_use_http: true
              additional_endpoints:
              - api_key: "apiKey2"
                Host: "agent-http-intake.logs.datadoghq.com"
                Port: 443
                is_reliable: true            

To avoid exposing your API key(s) in clear text inside the ConfigMap, you can also use the environment variable configuration and reference a Kubernetes secret. Here is an example to send metrics to an additional region:

  1. Create a Kubernetes secret with your environment variable configuration value from this guide:
    kubectl create -n <DATADOG AGENT NAMESPACE> secret generic dual-shipping --from-literal metrics='{"https://app.datadoghq.eu": ["apikey4"]}'
    
  2. Use the [key].env parameter to reference this secret in your configuration:
    apiVersion: datadoghq.com/v2alpha1
    kind: DatadogAgent
    metadata:
      name: datadog
    spec:
      override:
        nodeAgent:
          env:
          - name: DD_ADDITIONAL_ENDPOINTS
            valueFrom:
              secretKeyRef:
                name: dual-shipping
                key: metrics
    

Further reading

お役に立つドキュメント、リンクや記事: