This product is not supported for your selected Datadog site. ().

aws_storagegateway_nfs_fileshare

account_id

Type: STRING

audit_destination_arn

Type: STRING
Provider name: AuditDestinationARN
Description: The Amazon Resource Name (ARN) of the storage used for audit logs.

bucket_region

Type: STRING
Provider name: BucketRegion
Description: Specifies the Region of the S3 bucket where the NFS file share stores files. This parameter is required for NFS file shares that connect to Amazon S3 through a VPC endpoint, a VPC access point, or an access point alias that points to a VPC access point.

cache_attributes

Type: STRUCT
Provider name: CacheAttributes
Description: Refresh cache information for the file share.

  • cache_stale_timeout_in_seconds
    Type: INT32
    Provider name: CacheStaleTimeoutInSeconds
    Description: Refreshes a file share’s cache by using Time To Live (TTL). TTL is the length of time since the last refresh after which access to the directory would cause the file gateway to first refresh that directory’s contents from the Amazon S3 bucket or Amazon FSx file system. The TTL duration is in seconds. Valid Values:0, 300 to 2,592,000 seconds (5 minutes to 30 days)

client_list

Type: UNORDERED_LIST_STRING
Provider name: ClientList

default_storage_class

Type: STRING
Provider name: DefaultStorageClass
Description: The default storage class for objects put into an Amazon S3 bucket by the S3 File Gateway. The default value is S3_STANDARD. Optional. Valid Values: S3_STANDARD | S3_INTELLIGENT_TIERING | S3_STANDARD_IA | S3_ONEZONE_IA

encryption_type

Type: STRING
Provider name: EncryptionType
Description: A value that specifies the type of server-side encryption that the file share will use for the data that it stores in Amazon S3. We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters. If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

file_share_arn

Type: STRING
Provider name: FileShareARN

file_share_id

Type: STRING
Provider name: FileShareId

file_share_name

Type: STRING
Provider name: FileShareName
Description: The name of the file share. Optional. FileShareName must be set if an S3 prefix name is set in LocationARN, or if an access point or access point alias is used.

file_share_status

Type: STRING
Provider name: FileShareStatus

gateway_arn

Type: STRING
Provider name: GatewayARN

guess_mime_type_enabled

Type: BOOLEAN
Provider name: GuessMIMETypeEnabled
Description: A value that enables guessing of the MIME type for uploaded objects based on file extensions. Set this value to true to enable MIME type guessing, otherwise set to false. The default value is true. Valid Values: true | false

kms_encrypted

Type: BOOLEAN
Provider name: KMSEncrypted
Description: Optional. Set to true to use Amazon S3 server-side encryption with your own KMS key (SSE-KMS), or false to use a key managed by Amazon S3 (SSE-S3). To use dual-layer encryption (DSSE-KMS), set the EncryptionType parameter instead. We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters. If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true. Valid Values: true | false

kms_key

Type: STRING
Provider name: KMSKey

location_arn

Type: STRING
Provider name: LocationARN

nfs_file_share_defaults

Type: STRUCT
Provider name: NFSFileShareDefaults

  • directory_mode
    Type: STRING
    Provider name: DirectoryMode
    Description: The Unix directory mode in the form “nnnn”. For example, 0666 represents the default access mode for all directories inside the file share. The default value is 0777.
  • file_mode
    Type: STRING
    Provider name: FileMode
    Description: The Unix file mode in the form “nnnn”. For example, 0666 represents the default file mode inside the file share. The default value is 0666.
  • group_id
    Type: INT64
    Provider name: GroupId
    Description: The default group ID for the file share (unless the files have another group ID specified). The default value is nfsnobody.
  • owner_id
    Type: INT64
    Provider name: OwnerId
    Description: The default owner ID for files in the file share (unless the files have another owner ID specified). The default value is nfsnobody.

notification_policy

Type: STRING
Provider name: NotificationPolicy
Description: The notification policy of the file share. SettlingTimeInSeconds controls the number of seconds to wait after the last point in time a client wrote to a file before generating an ObjectUploaded notification. Because clients can make many small writes to files, it’s best to set this parameter for as long as possible to avoid generating multiple notifications for the same file in a small time period. SettlingTimeInSeconds has no effect on the timing of the object uploading to Amazon S3, only the timing of the notification. This setting is not meant to specify an exact time at which the notification will be sent. In some cases, the gateway might require more than the specified delay time to generate and send notifications. The following example sets NotificationPolicy on with SettlingTimeInSeconds set to 60. {"Upload": {"SettlingTimeInSeconds": 60}} The following example sets NotificationPolicy off. {}

object_acl

Type: STRING
Provider name: ObjectACL

path

Type: STRING
Provider name: Path

read_only

Type: BOOLEAN
Provider name: ReadOnly
Description: A value that sets the write status of a file share. Set this value to true to set the write status to read-only, otherwise set to false. Valid Values: true | false

requester_pays

Type: BOOLEAN
Provider name: RequesterPays
Description: A value that sets who pays the cost of the request and the cost associated with data download from the S3 bucket. If this value is set to true, the requester pays the costs; otherwise, the S3 bucket owner pays. However, the S3 bucket owner always pays the cost of storing data. RequesterPays is a configuration for the S3 bucket that backs the file share, so make sure that the configuration on the file share is the same as the S3 bucket configuration. Valid Values: true | false

role

Type: STRING
Provider name: Role

squash

Type: STRING
Provider name: Squash

tags

Type: UNORDERED_LIST_STRING

vpc_endpoint_dns_name

Type: STRING
Provider name: VPCEndpointDNSName
Description: Specifies the DNS name for the VPC endpoint that the NFS file share uses to connect to Amazon S3. This parameter is required for NFS file shares that connect to Amazon S3 through a VPC endpoint, a VPC access point, or an access point alias that points to a VPC access point.