Este producto no es compatible con el
sitio Datadog seleccionado. (
).
aws_firehose_delivery_stream
account_id
Type: STRING
create_timestamp
Type: TIMESTAMP
Provider name: CreateTimestamp
Description: The date and time that the Firehose stream was created.
delivery_stream_arn
Type: STRING
Provider name: DeliveryStreamARN
Description: The Amazon Resource Name (ARN) of the Firehose stream. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
delivery_stream_encryption_configuration
Type: STRUCT
Provider name: DeliveryStreamEncryptionConfiguration
Description: Indicates the server-side encryption (SSE) status for the Firehose stream.
failure_description
Type: STRUCT
Provider name: FailureDescription
Description: Provides details in case one of the following operations fails due to an error related to KMS: CreateDeliveryStream, DeleteDeliveryStream, StartDeliveryStreamEncryption, StopDeliveryStreamEncryption.
details
Type: STRING
Provider name: Details
Description: A message providing details about the error that caused the failure.
type
Type: STRING
Provider name: Type
Description: The type of error that caused the failure.
key_arn
Type: STRING
Provider name: KeyARN
Description: If KeyType is CUSTOMER_MANAGED_CMK, this field contains the ARN of the customer managed CMK. If KeyType is Amazon Web Services_OWNED_CMK, DeliveryStreamEncryptionConfiguration doesn’t contain a value for KeyARN.
key_type
Type: STRING
Provider name: KeyType
Description: Indicates the type of customer master key (CMK) that is used for encryption. The default setting is Amazon Web Services_OWNED_CMK. For more information about CMKs, see Customer Master Keys (CMKs).
status
Type: STRING
Provider name: Status
Description: This is the server-side encryption (SSE) status for the Firehose stream. For a full description of the different values of this status, see StartDeliveryStreamEncryption and StopDeliveryStreamEncryption. If this status is ENABLING_FAILED or DISABLING_FAILED, it is the status of the most recent attempt to enable or disable SSE, respectively.
delivery_stream_name
Type: STRING
Provider name: DeliveryStreamName
Description: The name of the Firehose stream.
delivery_stream_status
Type: STRING
Provider name: DeliveryStreamStatus
Description: The status of the Firehose stream. If the status of a Firehose stream is CREATING_FAILED, this status doesn’t change, and you can’t invoke CreateDeliveryStream again on it. However, you can invoke the DeleteDeliveryStream operation to delete it.
delivery_stream_type
Type: STRING
Provider name: DeliveryStreamType
Description: The Firehose stream type. This can be one of the following values:
DirectPut: Provider applications access the Firehose stream directly.KinesisStreamAsSource: The Firehose stream uses a Kinesis data stream as a source.
destinations
Type: UNORDERED_LIST_STRUCT
Provider name: Destinations
Description: The destinations.
amazon_open_search_serverless_destination_description
Type: STRUCT
Provider name: AmazonOpenSearchServerlessDestinationDescription
Description: The destination in the Serverless offering for Amazon OpenSearch Service.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering options.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
collection_endpoint
Type: STRING
Provider name: CollectionEndpoint
Description: The endpoint to use when communicating with the collection in the Serverless offering for Amazon OpenSearch Service.
index_name
Type: STRING
Provider name: IndexName
Description: The Serverless offering for Amazon OpenSearch Service index name.
processing_configuration
Type: STRUCT
Provider name: ProcessingConfiguration
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables data processing.
processors
Type: UNORDERED_LIST_STRUCT
Provider name: Processors
Description: The data processors.
parameters
Type: UNORDERED_LIST_STRUCT
Provider name: Parameters
Description: The processor parameters.
parameter_name
Type: STRING
Provider name: ParameterName
Description: The name of the parameter. Currently the following default values are supported: 3 for NumberOfRetries and 60 for the BufferIntervalInSeconds. The BufferSizeInMBs ranges between 0.2 MB and up to 3MB. The default buffering hint is 1MB for all destinations, except Splunk. For Splunk, the default buffering hint is 256 KB.
parameter_value
Type: STRING
Provider name: ParameterValue
Description: The parameter value.
type
Type: STRING
Provider name: Type
Description: The type of processor.
retry_options
Type: STRUCT
Provider name: RetryOptions
Description: The Serverless offering for Amazon OpenSearch Service retry options.
duration_in_seconds
Type: INT32
Provider name: DurationInSeconds
Description: After an initial failure to deliver to the Serverless offering for Amazon OpenSearch Service, the total amount of time during which Firehose retries delivery (including the first attempt). After this time has elapsed, the failed documents are written to Amazon S3. Default value is 300 seconds (5 minutes). A value of 0 (zero) results in no retries.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials.
s3_backup_mode
Type: STRING
Provider name: S3BackupMode
Description: The Amazon S3 backup mode.
s3_destination_description
Type: STRUCT
Provider name: S3DestinationDescription
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
vpc_configuration_description
Type: STRUCT
Provider name: VpcConfigurationDescription
role_arn
Type: STRING
Provider name: RoleARN
Description: The ARN of the IAM role that the Firehose stream uses to create endpoints in the destination VPC. You can use your existing Firehose delivery role or you can specify a new role. In either case, make sure that the role trusts the Firehose service principal and that it grants the following permissions:ec2:DescribeVpcsec2:DescribeVpcAttributeec2:DescribeSubnetsec2:DescribeSecurityGroupsec2:DescribeNetworkInterfacesec2:CreateNetworkInterfaceec2:CreateNetworkInterfacePermissionec2:DeleteNetworkInterface
If you revoke these permissions after you create the Firehose stream, Firehose can’t scale out by creating more ENIs when necessary. You might therefore see a degradation in performance.
security_group_ids
Type: UNORDERED_LIST_STRING
Provider name: SecurityGroupIds
Description: The IDs of the security groups that Firehose uses when it creates ENIs in the VPC of the Amazon OpenSearch Service destination. You can use the same security group that the Amazon ES domain uses or different ones. If you specify different security groups, ensure that they allow outbound HTTPS traffic to the Amazon OpenSearch Service domain’s security group. Also ensure that the Amazon OpenSearch Service domain’s security group allows HTTPS traffic from the security groups specified here. If you use the same security group for both your Firehose stream and the Amazon OpenSearch Service domain, make sure the security group inbound rule allows HTTPS traffic. For more information about security group rules, see Security group rules in the Amazon VPC documentation.
subnet_ids
Type: UNORDERED_LIST_STRING
Provider name: SubnetIds
Description: The IDs of the subnets that Firehose uses to create ENIs in the VPC of the Amazon OpenSearch Service destination. Make sure that the routing tables and inbound and outbound rules allow traffic to flow from the subnets whose IDs are specified here to the subnets that have the destination Amazon OpenSearch Service endpoints. Firehose creates at least one ENI in each of the subnets that are specified here. Do not delete or modify these ENIs. The number of ENIs that Firehose creates in the subnets specified here scales up and down automatically based on throughput. To enable Firehose to scale up the number of ENIs to match throughput, ensure that you have sufficient quota. To help you calculate the quota you need, assume that Firehose can create up to three ENIs for this Firehose stream for each of the subnets specified here. For more information about ENI quota, see Network Interfaces in the Amazon VPC Quotas topic.
vpc_id
Type: STRING
Provider name: VpcId
Description: The ID of the Amazon OpenSearch Service destination’s VPC.
amazonopensearchservice_destination_description
Type: STRUCT
Provider name: AmazonopensearchserviceDestinationDescription
Description: The destination in Amazon OpenSearch Service.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering options.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
cluster_endpoint
Type: STRING
Provider name: ClusterEndpoint
Description: The endpoint to use when communicating with the cluster. Firehose uses either this ClusterEndpoint or the DomainARN field to send data to Amazon OpenSearch Service.
document_id_options
Type: STRUCT
Provider name: DocumentIdOptions
Description: Indicates the method for setting up document ID. The supported methods are Firehose generated document ID and OpenSearch Service generated document ID.
default_document_id_format
Type: STRING
Provider name: DefaultDocumentIdFormat
Description: When the FIREHOSE_DEFAULT option is chosen, Firehose generates a unique document ID for each record based on a unique internal identifier. The generated document ID is stable across multiple delivery attempts, which helps prevent the same record from being indexed multiple times with different document IDs. When the NO_DOCUMENT_ID option is chosen, Firehose does not include any document IDs in the requests it sends to the Amazon OpenSearch Service. This causes the Amazon OpenSearch Service domain to generate document IDs. In case of multiple delivery attempts, this may cause the same record to be indexed more than once with different document IDs. This option enables write-heavy operations, such as the ingestion of logs and observability data, to consume less resources in the Amazon OpenSearch Service domain, resulting in improved performance.
domain_arn
Type: STRING
Provider name: DomainARN
Description: The ARN of the Amazon OpenSearch Service domain.
index_name
Type: STRING
Provider name: IndexName
Description: The Amazon OpenSearch Service index name.
index_rotation_period
Type: STRING
Provider name: IndexRotationPeriod
Description: The Amazon OpenSearch Service index rotation period
processing_configuration
Type: STRUCT
Provider name: ProcessingConfiguration
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables data processing.
processors
Type: UNORDERED_LIST_STRUCT
Provider name: Processors
Description: The data processors.
parameters
Type: UNORDERED_LIST_STRUCT
Provider name: Parameters
Description: The processor parameters.
parameter_name
Type: STRING
Provider name: ParameterName
Description: The name of the parameter. Currently the following default values are supported: 3 for NumberOfRetries and 60 for the BufferIntervalInSeconds. The BufferSizeInMBs ranges between 0.2 MB and up to 3MB. The default buffering hint is 1MB for all destinations, except Splunk. For Splunk, the default buffering hint is 256 KB.
parameter_value
Type: STRING
Provider name: ParameterValue
Description: The parameter value.
type
Type: STRING
Provider name: Type
Description: The type of processor.
retry_options
Type: STRUCT
Provider name: RetryOptions
Description: The Amazon OpenSearch Service retry options.
duration_in_seconds
Type: INT32
Provider name: DurationInSeconds
Description: After an initial failure to deliver to Amazon OpenSearch Service, the total amount of time during which Firehose retries delivery (including the first attempt). After this time has elapsed, the failed documents are written to Amazon S3. Default value is 300 seconds (5 minutes). A value of 0 (zero) results in no retries.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials.
s3_backup_mode
Type: STRING
Provider name: S3BackupMode
Description: The Amazon S3 backup mode.
s3_destination_description
Type: STRUCT
Provider name: S3DestinationDescription
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
type_name
Type: STRING
Provider name: TypeName
Description: The Amazon OpenSearch Service type name. This applies to Elasticsearch 6.x and lower versions. For Elasticsearch 7.x and OpenSearch Service 1.x, there’s no value for TypeName.
vpc_configuration_description
Type: STRUCT
Provider name: VpcConfigurationDescription
role_arn
Type: STRING
Provider name: RoleARN
Description: The ARN of the IAM role that the Firehose stream uses to create endpoints in the destination VPC. You can use your existing Firehose delivery role or you can specify a new role. In either case, make sure that the role trusts the Firehose service principal and that it grants the following permissions:ec2:DescribeVpcsec2:DescribeVpcAttributeec2:DescribeSubnetsec2:DescribeSecurityGroupsec2:DescribeNetworkInterfacesec2:CreateNetworkInterfaceec2:CreateNetworkInterfacePermissionec2:DeleteNetworkInterface
If you revoke these permissions after you create the Firehose stream, Firehose can’t scale out by creating more ENIs when necessary. You might therefore see a degradation in performance.
security_group_ids
Type: UNORDERED_LIST_STRING
Provider name: SecurityGroupIds
Description: The IDs of the security groups that Firehose uses when it creates ENIs in the VPC of the Amazon OpenSearch Service destination. You can use the same security group that the Amazon ES domain uses or different ones. If you specify different security groups, ensure that they allow outbound HTTPS traffic to the Amazon OpenSearch Service domain’s security group. Also ensure that the Amazon OpenSearch Service domain’s security group allows HTTPS traffic from the security groups specified here. If you use the same security group for both your Firehose stream and the Amazon OpenSearch Service domain, make sure the security group inbound rule allows HTTPS traffic. For more information about security group rules, see Security group rules in the Amazon VPC documentation.
subnet_ids
Type: UNORDERED_LIST_STRING
Provider name: SubnetIds
Description: The IDs of the subnets that Firehose uses to create ENIs in the VPC of the Amazon OpenSearch Service destination. Make sure that the routing tables and inbound and outbound rules allow traffic to flow from the subnets whose IDs are specified here to the subnets that have the destination Amazon OpenSearch Service endpoints. Firehose creates at least one ENI in each of the subnets that are specified here. Do not delete or modify these ENIs. The number of ENIs that Firehose creates in the subnets specified here scales up and down automatically based on throughput. To enable Firehose to scale up the number of ENIs to match throughput, ensure that you have sufficient quota. To help you calculate the quota you need, assume that Firehose can create up to three ENIs for this Firehose stream for each of the subnets specified here. For more information about ENI quota, see Network Interfaces in the Amazon VPC Quotas topic.
vpc_id
Type: STRING
Provider name: VpcId
Description: The ID of the Amazon OpenSearch Service destination’s VPC.
destination_id
Type: STRING
Provider name: DestinationId
Description: The ID of the destination.
elasticsearch_destination_description
Type: STRUCT
Provider name: ElasticsearchDestinationDescription
Description: The destination in Amazon OpenSearch Service.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering options.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
cluster_endpoint
Type: STRING
Provider name: ClusterEndpoint
Description: The endpoint to use when communicating with the cluster. Firehose uses either this ClusterEndpoint or the DomainARN field to send data to Amazon OpenSearch Service.
document_id_options
Type: STRUCT
Provider name: DocumentIdOptions
Description: Indicates the method for setting up document ID. The supported methods are Firehose generated document ID and OpenSearch Service generated document ID.
default_document_id_format
Type: STRING
Provider name: DefaultDocumentIdFormat
Description: When the FIREHOSE_DEFAULT option is chosen, Firehose generates a unique document ID for each record based on a unique internal identifier. The generated document ID is stable across multiple delivery attempts, which helps prevent the same record from being indexed multiple times with different document IDs. When the NO_DOCUMENT_ID option is chosen, Firehose does not include any document IDs in the requests it sends to the Amazon OpenSearch Service. This causes the Amazon OpenSearch Service domain to generate document IDs. In case of multiple delivery attempts, this may cause the same record to be indexed more than once with different document IDs. This option enables write-heavy operations, such as the ingestion of logs and observability data, to consume less resources in the Amazon OpenSearch Service domain, resulting in improved performance.
domain_arn
Type: STRING
Provider name: DomainARN
Description: The ARN of the Amazon OpenSearch Service domain. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces. Firehose uses either ClusterEndpoint or DomainARN to send data to Amazon OpenSearch Service.
index_name
Type: STRING
Provider name: IndexName
Description: The Elasticsearch index name.
index_rotation_period
Type: STRING
Provider name: IndexRotationPeriod
Description: The Elasticsearch index rotation period
processing_configuration
Type: STRUCT
Provider name: ProcessingConfiguration
Description: The data processing configuration.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables data processing.
processors
Type: UNORDERED_LIST_STRUCT
Provider name: Processors
Description: The data processors.
parameters
Type: UNORDERED_LIST_STRUCT
Provider name: Parameters
Description: The processor parameters.
parameter_name
Type: STRING
Provider name: ParameterName
Description: The name of the parameter. Currently the following default values are supported: 3 for NumberOfRetries and 60 for the BufferIntervalInSeconds. The BufferSizeInMBs ranges between 0.2 MB and up to 3MB. The default buffering hint is 1MB for all destinations, except Splunk. For Splunk, the default buffering hint is 256 KB.
parameter_value
Type: STRING
Provider name: ParameterValue
Description: The parameter value.
type
Type: STRING
Provider name: Type
Description: The type of processor.
retry_options
Type: STRUCT
Provider name: RetryOptions
Description: The Amazon OpenSearch Service retry options.
duration_in_seconds
Type: INT32
Provider name: DurationInSeconds
Description: After an initial failure to deliver to Amazon OpenSearch Service, the total amount of time during which Firehose retries delivery (including the first attempt). After this time has elapsed, the failed documents are written to Amazon S3. Default value is 300 seconds (5 minutes). A value of 0 (zero) results in no retries.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
s3_backup_mode
Type: STRING
Provider name: S3BackupMode
Description: The Amazon S3 backup mode.
s3_destination_description
Type: STRUCT
Provider name: S3DestinationDescription
Description: The Amazon S3 destination.
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
type_name
Type: STRING
Provider name: TypeName
Description: The Elasticsearch type name. This applies to Elasticsearch 6.x and lower versions. For Elasticsearch 7.x and OpenSearch Service 1.x, there’s no value for TypeName.
vpc_configuration_description
Type: STRUCT
Provider name: VpcConfigurationDescription
Description: The details of the VPC of the Amazon OpenSearch or the Amazon OpenSearch Serverless destination.
role_arn
Type: STRING
Provider name: RoleARN
Description: The ARN of the IAM role that the Firehose stream uses to create endpoints in the destination VPC. You can use your existing Firehose delivery role or you can specify a new role. In either case, make sure that the role trusts the Firehose service principal and that it grants the following permissions:ec2:DescribeVpcsec2:DescribeVpcAttributeec2:DescribeSubnetsec2:DescribeSecurityGroupsec2:DescribeNetworkInterfacesec2:CreateNetworkInterfaceec2:CreateNetworkInterfacePermissionec2:DeleteNetworkInterface
If you revoke these permissions after you create the Firehose stream, Firehose can’t scale out by creating more ENIs when necessary. You might therefore see a degradation in performance.
security_group_ids
Type: UNORDERED_LIST_STRING
Provider name: SecurityGroupIds
Description: The IDs of the security groups that Firehose uses when it creates ENIs in the VPC of the Amazon OpenSearch Service destination. You can use the same security group that the Amazon ES domain uses or different ones. If you specify different security groups, ensure that they allow outbound HTTPS traffic to the Amazon OpenSearch Service domain’s security group. Also ensure that the Amazon OpenSearch Service domain’s security group allows HTTPS traffic from the security groups specified here. If you use the same security group for both your Firehose stream and the Amazon OpenSearch Service domain, make sure the security group inbound rule allows HTTPS traffic. For more information about security group rules, see Security group rules in the Amazon VPC documentation.
subnet_ids
Type: UNORDERED_LIST_STRING
Provider name: SubnetIds
Description: The IDs of the subnets that Firehose uses to create ENIs in the VPC of the Amazon OpenSearch Service destination. Make sure that the routing tables and inbound and outbound rules allow traffic to flow from the subnets whose IDs are specified here to the subnets that have the destination Amazon OpenSearch Service endpoints. Firehose creates at least one ENI in each of the subnets that are specified here. Do not delete or modify these ENIs. The number of ENIs that Firehose creates in the subnets specified here scales up and down automatically based on throughput. To enable Firehose to scale up the number of ENIs to match throughput, ensure that you have sufficient quota. To help you calculate the quota you need, assume that Firehose can create up to three ENIs for this Firehose stream for each of the subnets specified here. For more information about ENI quota, see Network Interfaces in the Amazon VPC Quotas topic.
vpc_id
Type: STRING
Provider name: VpcId
Description: The ID of the Amazon OpenSearch Service destination’s VPC.
extended_s3_destination_description
Type: STRUCT
Provider name: ExtendedS3DestinationDescription
Description: The destination in Amazon S3.
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
custom_time_zone
Type: STRING
Provider name: CustomTimeZone
Description: The time zone you prefer. UTC is the default.
data_format_conversion_configuration
Type: STRUCT
Provider name: DataFormatConversionConfiguration
Description: The serializer, deserializer, and schema for converting data from the JSON format to the Parquet or ORC format before writing it to Amazon S3.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Defaults to true. Set it to false if you want to disable format conversion while preserving the configuration details.
input_format_configuration
Type: STRUCT
Provider name: InputFormatConfiguration
Description: Specifies the deserializer that you want Firehose to use to convert the format of your data from JSON. This parameter is required if Enabled is set to true.
deserializer
Type: STRUCT
Provider name: Deserializer
Description: Specifies which deserializer to use. You can choose either the Apache Hive JSON SerDe or the OpenX JSON SerDe. If both are non-null, the server rejects the request.
hive_json_ser_de
Type: STRUCT
Provider name: HiveJsonSerDe
Description: The native Hive / HCatalog JsonSerDe. Used by Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the OpenX SerDe.
timestamp_formats
Type: UNORDERED_LIST_STRING
Provider name: TimestampFormats
Description: Indicates how you want Firehose to parse the date and timestamps that may be present in your input data JSON. To specify these format strings, follow the pattern syntax of JodaTime’s DateTimeFormat format strings. For more information, see Class DateTimeFormat. You can also use the special value millis to parse timestamps in epoch milliseconds. If you don’t specify a format, Firehose uses java.sql.Timestamp::valueOf by default.
open_x_json_ser_de
Type: STRUCT
Provider name: OpenXJsonSerDe
Description: The OpenX SerDe. Used by Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the native Hive / HCatalog JsonSerDe.
case_insensitive
Type: BOOLEAN
Provider name: CaseInsensitive
Description: When set to true, which is the default, Firehose converts JSON keys to lowercase before deserializing them.
column_to_json_key_mappings
Type: MAP_STRING_STRING
Provider name: ColumnToJsonKeyMappings
Description: Maps column names to JSON keys that aren’t identical to the column names. This is useful when the JSON contains keys that are Hive keywords. For example, timestamp is a Hive keyword. If you have a JSON key named timestamp, set this parameter to {“ts”: “timestamp”} to map this key to a column named ts.
convert_dots_in_json_keys_to_underscores
Type: BOOLEAN
Provider name: ConvertDotsInJsonKeysToUnderscores
Description: When set to true, specifies that the names of the keys include dots and that you want Firehose to replace them with underscores. This is useful because Apache Hive does not allow dots in column names. For example, if the JSON contains a key whose name is “a.b”, you can define the column name to be “a_b” when using this option. The default is false.
output_format_configuration
Type: STRUCT
Provider name: OutputFormatConfiguration
Description: Specifies the serializer that you want Firehose to use to convert the format of your data to the Parquet or ORC format. This parameter is required if Enabled is set to true.
serializer
Type: STRUCT
Provider name: Serializer
Description: Specifies which serializer to use. You can choose either the ORC SerDe or the Parquet SerDe. If both are non-null, the server rejects the request.
orc_ser_de
Type: STRUCT
Provider name: OrcSerDe
Description: A serializer to use for converting data to the ORC format before storing it in Amazon S3. For more information, see Apache ORC.
block_size_bytes
Type: INT32
Provider name: BlockSizeBytes
Description: The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the minimum is 64 MiB. Firehose uses this value for padding calculations.
bloom_filter_columns
Type: UNORDERED_LIST_STRING
Provider name: BloomFilterColumns
Description: The column names for which you want Firehose to create bloom filters. The default is null.
bloom_filter_false_positive_probability
Type: DOUBLE
Provider name: BloomFilterFalsePositiveProbability
Description: The Bloom filter false positive probability (FPP). The lower the FPP, the bigger the Bloom filter. The default value is 0.05, the minimum is 0, and the maximum is 1.
compression
Type: STRING
Provider name: Compression
Description: The compression code to use over data blocks. The default is SNAPPY.
dictionary_key_threshold
Type: DOUBLE
Provider name: DictionaryKeyThreshold
Description: Represents the fraction of the total number of non-null rows. To turn off dictionary encoding, set this fraction to a number that is less than the number of distinct keys in a dictionary. To always use dictionary encoding, set this threshold to 1.
enable_padding
Type: BOOLEAN
Provider name: EnablePadding
Description: Set this to true to indicate that you want stripes to be padded to the HDFS block boundaries. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is false.
format_version
Type: STRING
Provider name: FormatVersion
Description: The version of the file to write. The possible values are V0_11 and V0_12. The default is V0_12.
padding_tolerance
Type: DOUBLE
Provider name: PaddingTolerance
Description: A number between 0 and 1 that defines the tolerance for block padding as a decimal fraction of stripe size. The default value is 0.05, which means 5 percent of stripe size. For the default values of 64 MiB ORC stripes and 256 MiB HDFS blocks, the default block padding tolerance of 5 percent reserves a maximum of 3.2 MiB for padding within the 256 MiB block. In such a case, if the available size within the block is more than 3.2 MiB, a new, smaller stripe is inserted to fit within that space. This ensures that no stripe crosses block boundaries and causes remote reads within a node-local task. Firehose ignores this parameter when OrcSerDe$EnablePadding is false.
row_index_stride
Type: INT32
Provider name: RowIndexStride
Description: The number of rows between index entries. The default is 10,000 and the minimum is 1,000.
stripe_size_bytes
Type: INT32
Provider name: StripeSizeBytes
Description: The number of bytes in each stripe. The default is 64 MiB and the minimum is 8 MiB.
parquet_ser_de
Type: STRUCT
Provider name: ParquetSerDe
Description: A serializer to use for converting data to the Parquet format before storing it in Amazon S3. For more information, see Apache Parquet.
block_size_bytes
Type: INT32
Provider name: BlockSizeBytes
Description: The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the minimum is 64 MiB. Firehose uses this value for padding calculations.
compression
Type: STRING
Provider name: Compression
Description: The compression code to use over data blocks. The possible values are UNCOMPRESSED, SNAPPY, and GZIP, with the default being SNAPPY. Use SNAPPY for higher decompression speed. Use GZIP if the compression ratio is more important than speed.
enable_dictionary_compression
Type: BOOLEAN
Provider name: EnableDictionaryCompression
Description: Indicates whether to enable dictionary compression.
max_padding_bytes
Type: INT32
Provider name: MaxPaddingBytes
Description: The maximum amount of padding to apply. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 0.
page_size_bytes
Type: INT32
Provider name: PageSizeBytes
Description: The Parquet page size. Column chunks are divided into pages. A page is conceptually an indivisible unit (in terms of compression and encoding). The minimum value is 64 KiB and the default is 1 MiB.
writer_version
Type: STRING
Provider name: WriterVersion
Description: Indicates the version of row format to output. The possible values are V1 and V2. The default is V1.
schema_configuration
Type: STRUCT
Provider name: SchemaConfiguration
Description: Specifies the Amazon Web Services Glue Data Catalog table that contains the column information. This parameter is required if Enabled is set to true.
catalog_id
Type: STRING
Provider name: CatalogId
Description: The ID of the Amazon Web Services Glue Data Catalog. If you don’t supply this, the Amazon Web Services account ID is used by default.
database_name
Type: STRING
Provider name: DatabaseName
Description: Specifies the name of the Amazon Web Services Glue database that contains the schema for the output data. If the SchemaConfiguration request parameter is used as part of invoking the CreateDeliveryStream API, then the DatabaseName property is required and its value must be specified.
region
Type: STRING
Provider name: Region
Description: If you don’t specify an Amazon Web Services Region, the default is the current Region.
role_arn
Type: STRING
Provider name: RoleARN
Description: The role that Firehose can use to access Amazon Web Services Glue. This role must be in the same account you use for Firehose. Cross-account roles aren’t allowed. If the SchemaConfiguration request parameter is used as part of invoking the CreateDeliveryStream API, then the RoleARN property is required and its value must be specified.
table_name
Type: STRING
Provider name: TableName
Description: Specifies the Amazon Web Services Glue table that contains the column information that constitutes your data schema. If the SchemaConfiguration request parameter is used as part of invoking the CreateDeliveryStream API, then the TableName property is required and its value must be specified.
version_id
Type: STRING
Provider name: VersionId
Description: Specifies the table version for the output data schema. If you don’t specify this version ID, or if you set it to LATEST, Firehose uses the most recent version. This means that any updates to the table are automatically picked up.
dynamic_partitioning_configuration
Type: STRUCT
Provider name: DynamicPartitioningConfiguration
Description: The configuration of the dynamic partitioning mechanism that creates smaller data sets from the streaming data by partitioning it based on partition keys. Currently, dynamic partitioning is only supported for Amazon S3 destinations.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Specifies that the dynamic partitioning is enabled for this Firehose stream.
retry_options
Type: STRUCT
Provider name: RetryOptions
Description: The retry behavior in case Firehose is unable to deliver data to an Amazon S3 prefix.
duration_in_seconds
Type: INT32
Provider name: DurationInSeconds
Description: The period of time during which Firehose retries to deliver data to the specified destination.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
file_extension
Type: STRING
Provider name: FileExtension
Description: Specify a file extension. It will override the default file extension
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
processing_configuration
Type: STRUCT
Provider name: ProcessingConfiguration
Description: The data processing configuration.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables data processing.
processors
Type: UNORDERED_LIST_STRUCT
Provider name: Processors
Description: The data processors.
parameters
Type: UNORDERED_LIST_STRUCT
Provider name: Parameters
Description: The processor parameters.
parameter_name
Type: STRING
Provider name: ParameterName
Description: The name of the parameter. Currently the following default values are supported: 3 for NumberOfRetries and 60 for the BufferIntervalInSeconds. The BufferSizeInMBs ranges between 0.2 MB and up to 3MB. The default buffering hint is 1MB for all destinations, except Splunk. For Splunk, the default buffering hint is 256 KB.
parameter_value
Type: STRING
Provider name: ParameterValue
Description: The parameter value.
type
Type: STRING
Provider name: Type
Description: The type of processor.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
s3_backup_description
Type: STRUCT
Provider name: S3BackupDescription
Description: The configuration for backup in Amazon S3.
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
s3_backup_mode
Type: STRING
Provider name: S3BackupMode
Description: The Amazon S3 backup mode.
http_endpoint_destination_description
Type: STRUCT
Provider name: HttpEndpointDestinationDescription
Description: Describes the specified HTTP endpoint destination.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: Describes buffering options that can be applied to the data before it is delivered to the HTTPS endpoint destination. Firehose teats these options as hints, and it might choose to use more optimal values. The SizeInMBs and IntervalInSeconds parameters are optional. However, if specify a value for one of them, you must also provide a value for the other.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
endpoint_configuration
Type: STRUCT
Provider name: EndpointConfiguration
Description: The configuration of the specified HTTP endpoint destination.
name
Type: STRING
Provider name: Name
Description: The name of the HTTP endpoint selected as the destination.
url
Type: STRING
Provider name: Url
Description: The URL of the HTTP endpoint selected as the destination.
processing_configuration
Type: STRUCT
Provider name: ProcessingConfiguration
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables data processing.
processors
Type: UNORDERED_LIST_STRUCT
Provider name: Processors
Description: The data processors.
parameters
Type: UNORDERED_LIST_STRUCT
Provider name: Parameters
Description: The processor parameters.
parameter_name
Type: STRING
Provider name: ParameterName
Description: The name of the parameter. Currently the following default values are supported: 3 for NumberOfRetries and 60 for the BufferIntervalInSeconds. The BufferSizeInMBs ranges between 0.2 MB and up to 3MB. The default buffering hint is 1MB for all destinations, except Splunk. For Splunk, the default buffering hint is 256 KB.
parameter_value
Type: STRING
Provider name: ParameterValue
Description: The parameter value.
type
Type: STRING
Provider name: Type
Description: The type of processor.
request_configuration
Type: STRUCT
Provider name: RequestConfiguration
Description: The configuration of request sent to the HTTP endpoint specified as the destination.
common_attributes
Type: UNORDERED_LIST_STRUCT
Provider name: CommonAttributes
Description: Describes the metadata sent to the HTTP endpoint destination.
attribute_name
Type: STRING
Provider name: AttributeName
Description: The name of the HTTP endpoint common attribute.
attribute_value
Type: STRING
Provider name: AttributeValue
Description: The value of the HTTP endpoint common attribute.
content_encoding
Type: STRING
Provider name: ContentEncoding
Description: Firehose uses the content encoding to compress the body of a request before sending the request to the destination. For more information, see Content-Encoding in MDN Web Docs, the official Mozilla documentation.
retry_options
Type: STRUCT
Provider name: RetryOptions
Description: Describes the retry behavior in case Firehose is unable to deliver data to the specified HTTP endpoint destination, or if it doesn’t receive a valid acknowledgment of receipt from the specified HTTP endpoint destination.
duration_in_seconds
Type: INT32
Provider name: DurationInSeconds
Description: The total amount of time that Firehose spends on retries. This duration starts after the initial attempt to send data to the custom destination via HTTPS endpoint fails. It doesn’t include the periods during which Firehose waits for acknowledgment from the specified destination after each attempt.
role_arn
Type: STRING
Provider name: RoleARN
Description: Firehose uses this IAM role for all the permissions that the delivery stream needs.
s3_backup_mode
Type: STRING
Provider name: S3BackupMode
Description: Describes the S3 bucket backup options for the data that Kinesis Firehose delivers to the HTTP endpoint destination. You can back up all documents (AllData) or only the documents that Firehose could not deliver to the specified HTTP endpoint destination (FailedDataOnly).
s3_destination_description
Type: STRUCT
Provider name: S3DestinationDescription
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
secrets_manager_configuration
Type: STRUCT
Provider name: SecretsManagerConfiguration
Description: The configuration that defines how you access secrets for HTTP Endpoint destination.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Specifies whether you want to use the secrets manager feature. When set as True the secrets manager configuration overwrites the existing secrets in the destination configuration. When it’s set to False Firehose falls back to the credentials in the destination configuration.
role_arn
Type: STRING
Provider name: RoleARN
Description: Specifies the role that Firehose assumes when calling the Secrets Manager API operation. When you provide the role, it overrides any destination specific role defined in the destination configuration. If you do not provide the then we use the destination specific role. This parameter is required for Splunk.
secret_arn
Type: STRING
Provider name: SecretARN
Description: The ARN of the secret that stores your credentials. It must be in the same region as the Firehose stream and the role. The secret ARN can reside in a different account than the Firehose stream and role as Firehose supports cross-account secret access. This parameter is required when Enabled is set to True.
iceberg_destination_description
Type: STRUCT
Provider name: IcebergDestinationDescription
Description: Describes a destination in Apache Iceberg Tables.
append_only
Type: BOOLEAN
Provider name: AppendOnly
Description: Describes whether all incoming data for this delivery stream will be append only (inserts only and not for updates and deletes) for Iceberg delivery. This feature is only applicable for Apache Iceberg Tables. The default value is false. If you set this value to true, Firehose automatically increases the throughput limit of a stream based on the throttling levels of the stream. If you set this parameter to true for a stream with updates and deletes, you will see out of order delivery.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
catalog_configuration
Type: STRUCT
Provider name: CatalogConfiguration
Description: Configuration describing where the destination Iceberg tables are persisted.
catalog_arn
Type: STRING
Provider name: CatalogARN
Description: Specifies the Glue catalog ARN identifier of the destination Apache Iceberg Tables. You must specify the ARN in the format arn:aws:glue:region:account-id:catalog.
warehouse_location
Type: STRING
Provider name: WarehouseLocation
Description: The warehouse location for Apache Iceberg tables. You must configure this when schema evolution and table creation is enabled. Amazon Data Firehose is in preview release and is subject to change.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
destination_table_configuration_list
Type: UNORDERED_LIST_STRUCT
Provider name: DestinationTableConfigurationList
Description: Provides a list of DestinationTableConfigurations which Firehose uses to deliver data to Apache Iceberg Tables. Firehose will write data with insert if table specific configuration is not provided here.
destination_database_name
Type: STRING
Provider name: DestinationDatabaseName
Description: The name of the Apache Iceberg database.
destination_table_name
Type: STRING
Provider name: DestinationTableName
Description: Specifies the name of the Apache Iceberg Table.
partition_spec
Type: STRUCT
Provider name: PartitionSpec
Description: The partition spec configuration for a table that is used by automatic table creation. Amazon Data Firehose is in preview release and is subject to change.
identity
Type: UNORDERED_LIST_STRUCT
Provider name: Identity
Description: List of identity transforms that performs an identity transformation. The transform takes the source value, and does not modify it. Result type is the source type. Amazon Data Firehose is in preview release and is subject to change.
source_name
Type: STRING
Provider name: SourceName
Description: The column name to be configured in partition spec. Amazon Data Firehose is in preview release and is subject to change.
s3_error_output_prefix
Type: STRING
Provider name: S3ErrorOutputPrefix
Description: The table specific S3 error output prefix. All the errors that occurred while delivering to this table will be prefixed with this value in S3 destination.
unique_keys
Type: UNORDERED_LIST_STRING
Provider name: UniqueKeys
Description: A list of unique keys for a given Apache Iceberg table. Firehose will use these for running Create, Update, or Delete operations on the given Iceberg table.
processing_configuration
Type: STRUCT
Provider name: ProcessingConfiguration
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables data processing.
processors
Type: UNORDERED_LIST_STRUCT
Provider name: Processors
Description: The data processors.
parameters
Type: UNORDERED_LIST_STRUCT
Provider name: Parameters
Description: The processor parameters.
parameter_name
Type: STRING
Provider name: ParameterName
Description: The name of the parameter. Currently the following default values are supported: 3 for NumberOfRetries and 60 for the BufferIntervalInSeconds. The BufferSizeInMBs ranges between 0.2 MB and up to 3MB. The default buffering hint is 1MB for all destinations, except Splunk. For Splunk, the default buffering hint is 256 KB.
parameter_value
Type: STRING
Provider name: ParameterValue
Description: The parameter value.
type
Type: STRING
Provider name: Type
Description: The type of processor.
retry_options
Type: STRUCT
Provider name: RetryOptions
duration_in_seconds
Type: INT32
Provider name: DurationInSeconds
Description: The period of time during which Firehose retries to deliver data to the specified destination.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the IAM role to be assumed by Firehose for calling Apache Iceberg Tables.
s3_backup_mode
Type: STRING
Provider name: S3BackupMode
Description: Describes how Firehose will backup records. Currently,Firehose only supports FailedDataOnly.
s3_destination_description
Type: STRUCT
Provider name: S3DestinationDescription
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
schema_evolution_configuration
Type: STRUCT
Provider name: SchemaEvolutionConfiguration
Description: The description of automatic schema evolution configuration. Amazon Data Firehose is in preview release and is subject to change.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Specify whether you want to enable schema evolution. Amazon Data Firehose is in preview release and is subject to change.
table_creation_configuration
Type: STRUCT
Provider name: TableCreationConfiguration
Description: The description of table creation configuration. Amazon Data Firehose is in preview release and is subject to change.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Specify whether you want to enable automatic table creation. Amazon Data Firehose is in preview release and is subject to change.
redshift_destination_description
Type: STRUCT
Provider name: RedshiftDestinationDescription
Description: The destination in Amazon Redshift.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
cluster_jdbcurl
Type: STRING
Provider name: ClusterJDBCURL
Description: The database connection string.
copy_command
Type: STRUCT
Provider name: CopyCommand
Description: The COPY command.
copy_options
Type: STRING
Provider name: CopyOptions
Description: Optional parameters to use with the Amazon Redshift COPY command. For more information, see the “Optional Parameters” section of Amazon Redshift COPY command. Some possible examples that would apply to Firehose are as follows: delimiter ‘\t’ lzop; - fields are delimited with “\t” (TAB character) and compressed using lzop. delimiter ‘|’ - fields are delimited with “|” (this is the default delimiter). delimiter ‘|’ escape - the delimiter should be escaped. fixedwidth ‘venueid:3,venuename:25,venuecity:12,venuestate:2,venueseats:6’ - fields are fixed width in the source, with each width specified after every column in the table. JSON ‘s3://mybucket/jsonpaths.txt’ - data is in JSON format, and the path specified is the format of the data. For more examples, see Amazon Redshift COPY command examples.
data_table_columns
Type: STRING
Provider name: DataTableColumns
Description: A comma-separated list of column names.
data_table_name
Type: STRING
Provider name: DataTableName
Description: The name of the target table. The table must already exist in the database.
processing_configuration
Type: STRUCT
Provider name: ProcessingConfiguration
Description: The data processing configuration.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables data processing.
processors
Type: UNORDERED_LIST_STRUCT
Provider name: Processors
Description: The data processors.
parameters
Type: UNORDERED_LIST_STRUCT
Provider name: Parameters
Description: The processor parameters.
parameter_name
Type: STRING
Provider name: ParameterName
Description: The name of the parameter. Currently the following default values are supported: 3 for NumberOfRetries and 60 for the BufferIntervalInSeconds. The BufferSizeInMBs ranges between 0.2 MB and up to 3MB. The default buffering hint is 1MB for all destinations, except Splunk. For Splunk, the default buffering hint is 256 KB.
parameter_value
Type: STRING
Provider name: ParameterValue
Description: The parameter value.
type
Type: STRING
Provider name: Type
Description: The type of processor.
retry_options
Type: STRUCT
Provider name: RetryOptions
Description: The retry behavior in case Firehose is unable to deliver documents to Amazon Redshift. Default value is 3600 (60 minutes).
duration_in_seconds
Type: INT32
Provider name: DurationInSeconds
Description: The length of time during which Firehose retries delivery after a failure, starting from the initial request and including the first attempt. The default value is 3600 seconds (60 minutes). Firehose does not retry if the value of DurationInSeconds is 0 (zero) or if the first delivery attempt takes longer than the current value.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
s3_backup_description
Type: STRUCT
Provider name: S3BackupDescription
Description: The configuration for backup in Amazon S3.
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
s3_backup_mode
Type: STRING
Provider name: S3BackupMode
Description: The Amazon S3 backup mode.
s3_destination_description
Type: STRUCT
Provider name: S3DestinationDescription
Description: The Amazon S3 destination.
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
secrets_manager_configuration
Type: STRUCT
Provider name: SecretsManagerConfiguration
Description: The configuration that defines how you access secrets for Amazon Redshift.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Specifies whether you want to use the secrets manager feature. When set as True the secrets manager configuration overwrites the existing secrets in the destination configuration. When it’s set to False Firehose falls back to the credentials in the destination configuration.
role_arn
Type: STRING
Provider name: RoleARN
Description: Specifies the role that Firehose assumes when calling the Secrets Manager API operation. When you provide the role, it overrides any destination specific role defined in the destination configuration. If you do not provide the then we use the destination specific role. This parameter is required for Splunk.
secret_arn
Type: STRING
Provider name: SecretARN
Description: The ARN of the secret that stores your credentials. It must be in the same region as the Firehose stream and the role. The secret ARN can reside in a different account than the Firehose stream and role as Firehose supports cross-account secret access. This parameter is required when Enabled is set to True.
username
Type: STRING
Provider name: Username
Description: The name of the user.
s3_destination_description
Type: STRUCT
Provider name: S3DestinationDescription
Description: [Deprecated] The destination in Amazon S3.
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
snowflake_destination_description
Type: STRUCT
Provider name: SnowflakeDestinationDescription
Description: Optional description for the destination
account_url
Type: STRING
Provider name: AccountUrl
Description: URL for accessing your Snowflake account. This URL must include your account identifier. Note that the protocol (https://) and port number are optional.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: Describes the buffering to perform before delivering data to the Snowflake destination. If you do not specify any value, Firehose uses the default values.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 0.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 128.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
content_column_name
Type: STRING
Provider name: ContentColumnName
Description: The name of the record content column
data_loading_option
Type: STRING
Provider name: DataLoadingOption
Description: Choose to load JSON keys mapped to table column names or choose to split the JSON payload where content is mapped to a record content column and source metadata is mapped to a record metadata column.
database
Type: STRING
Provider name: Database
Description: All data in Snowflake is maintained in databases.
meta_data_column_name
Type: STRING
Provider name: MetaDataColumnName
Description: The name of the record metadata column
processing_configuration
Type: STRUCT
Provider name: ProcessingConfiguration
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables data processing.
processors
Type: UNORDERED_LIST_STRUCT
Provider name: Processors
Description: The data processors.
parameters
Type: UNORDERED_LIST_STRUCT
Provider name: Parameters
Description: The processor parameters.
parameter_name
Type: STRING
Provider name: ParameterName
Description: The name of the parameter. Currently the following default values are supported: 3 for NumberOfRetries and 60 for the BufferIntervalInSeconds. The BufferSizeInMBs ranges between 0.2 MB and up to 3MB. The default buffering hint is 1MB for all destinations, except Splunk. For Splunk, the default buffering hint is 256 KB.
parameter_value
Type: STRING
Provider name: ParameterValue
Description: The parameter value.
type
Type: STRING
Provider name: Type
Description: The type of processor.
retry_options
Type: STRUCT
Provider name: RetryOptions
Description: The time period where Firehose will retry sending data to the chosen HTTP endpoint.
duration_in_seconds
Type: INT32
Provider name: DurationInSeconds
Description: the time period where Firehose will retry sending data to the chosen HTTP endpoint.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Snowflake role
s3_backup_mode
Type: STRING
Provider name: S3BackupMode
Description: Choose an S3 backup mode
s3_destination_description
Type: STRUCT
Provider name: S3DestinationDescription
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
schema
Type: STRING
Provider name: Schema
Description: Each database consists of one or more schemas, which are logical groupings of database objects, such as tables and views
secrets_manager_configuration
Type: STRUCT
Provider name: SecretsManagerConfiguration
Description: The configuration that defines how you access secrets for Snowflake.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Specifies whether you want to use the secrets manager feature. When set as True the secrets manager configuration overwrites the existing secrets in the destination configuration. When it’s set to False Firehose falls back to the credentials in the destination configuration.
role_arn
Type: STRING
Provider name: RoleARN
Description: Specifies the role that Firehose assumes when calling the Secrets Manager API operation. When you provide the role, it overrides any destination specific role defined in the destination configuration. If you do not provide the then we use the destination specific role. This parameter is required for Splunk.
secret_arn
Type: STRING
Provider name: SecretARN
Description: The ARN of the secret that stores your credentials. It must be in the same region as the Firehose stream and the role. The secret ARN can reside in a different account than the Firehose stream and role as Firehose supports cross-account secret access. This parameter is required when Enabled is set to True.
snowflake_role_configuration
Type: STRUCT
Provider name: SnowflakeRoleConfiguration
Description: Optionally configure a Snowflake role. Otherwise the default user role will be used.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enable Snowflake role
snowflake_role
Type: STRING
Provider name: SnowflakeRole
Description: The Snowflake role you wish to configure
snowflake_vpc_configuration
Type: STRUCT
Provider name: SnowflakeVpcConfiguration
Description: The VPCE ID for Firehose to privately connect with Snowflake. The ID format is com.amazonaws.vpce.[region].vpce-svc-<[id]>. For more information, see Amazon PrivateLink & Snowflake
private_link_vpce_id
Type: STRING
Provider name: PrivateLinkVpceId
Description: The VPCE ID for Firehose to privately connect with Snowflake. The ID format is com.amazonaws.vpce.[region].vpce-svc-<[id]>. For more information, see Amazon PrivateLink & Snowflake
table
Type: STRING
Provider name: Table
Description: All data in Snowflake is stored in database tables, logically structured as collections of columns and rows.
user
Type: STRING
Provider name: User
Description: User login name for the Snowflake account.
splunk_destination_description
Type: STRUCT
Provider name: SplunkDestinationDescription
Description: The destination in Splunk.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering options. If no value is specified, the default values for Splunk are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 60 (1 minute).
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
hec_acknowledgment_timeout_in_seconds
Type: INT32
Provider name: HECAcknowledgmentTimeoutInSeconds
Description: The amount of time that Firehose waits to receive an acknowledgment from Splunk after it sends it data. At the end of the timeout period, Firehose either tries to send the data again or considers it an error, based on your retry settings.
hec_endpoint
Type: STRING
Provider name: HECEndpoint
Description: The HTTP Event Collector (HEC) endpoint to which Firehose sends your data.
hec_endpoint_type
Type: STRING
Provider name: HECEndpointType
Description: This type can be either “Raw” or “Event."
hec_token
Type: STRING
Provider name: HECToken
Description: A GUID you obtain from your Splunk cluster when you create a new HEC endpoint.
processing_configuration
Type: STRUCT
Provider name: ProcessingConfiguration
Description: The data processing configuration.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables data processing.
processors
Type: UNORDERED_LIST_STRUCT
Provider name: Processors
Description: The data processors.
parameters
Type: UNORDERED_LIST_STRUCT
Provider name: Parameters
Description: The processor parameters.
parameter_name
Type: STRING
Provider name: ParameterName
Description: The name of the parameter. Currently the following default values are supported: 3 for NumberOfRetries and 60 for the BufferIntervalInSeconds. The BufferSizeInMBs ranges between 0.2 MB and up to 3MB. The default buffering hint is 1MB for all destinations, except Splunk. For Splunk, the default buffering hint is 256 KB.
parameter_value
Type: STRING
Provider name: ParameterValue
Description: The parameter value.
type
Type: STRING
Provider name: Type
Description: The type of processor.
retry_options
Type: STRUCT
Provider name: RetryOptions
Description: The retry behavior in case Firehose is unable to deliver data to Splunk or if it doesn’t receive an acknowledgment of receipt from Splunk.
duration_in_seconds
Type: INT32
Provider name: DurationInSeconds
Description: The total amount of time that Firehose spends on retries. This duration starts after the initial attempt to send data to Splunk fails. It doesn’t include the periods during which Firehose waits for acknowledgment from Splunk after each attempt.
s3_backup_mode
Type: STRING
Provider name: S3BackupMode
Description: Defines how documents should be delivered to Amazon S3. When set to FailedDocumentsOnly, Firehose writes any data that could not be indexed to the configured Amazon S3 destination. When set to AllDocuments, Firehose delivers all incoming records to Amazon S3, and also writes failed documents to Amazon S3. Default value is FailedDocumentsOnly.
s3_destination_description
Type: STRUCT
Provider name: S3DestinationDescription
Description: The Amazon S3 destination.>
bucket_arn
Type: STRING
Provider name: BucketARN
Description: The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
buffering_hints
Type: STRUCT
Provider name: BufferingHints
Description: The buffering option. If no value is specified, BufferingHints object default values are used.
interval_in_seconds
Type: INT32
Provider name: IntervalInSeconds
Description: Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs, and vice versa.
size_in_m_bs
Type: INT32
Provider name: SizeInMBs
Description: Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds, and vice versa. We recommend setting this parameter to a value greater than the amount of data you typically ingest into the Firehose stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
cloud_watch_logging_options
Type: STRUCT
Provider name: CloudWatchLoggingOptions
Description: The Amazon CloudWatch logging options for your Firehose stream.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Enables or disables CloudWatch logging.
log_group_name
Type: STRING
Provider name: LogGroupName
Description: The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
log_stream_name
Type: STRING
Provider name: LogStreamName
Description: The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
compression_format
Type: STRING
Provider name: CompressionFormat
Description: The compression format. If no value is specified, the default is UNCOMPRESSED.
encryption_configuration
Type: STRUCT
Provider name: EncryptionConfiguration
Description: The encryption configuration. If no value is specified, the default is no encryption.
kms_encryption_config
Type: STRUCT
Provider name: KMSEncryptionConfig
Description: The encryption key.
no_encryption_config
Type: STRING
Provider name: NoEncryptionConfig
Description: Specifically override existing encryption information to ensure that no encryption is used.
error_output_prefix
Type: STRING
Provider name: ErrorOutputPrefix
Description: A prefix that Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects.
prefix
Type: STRING
Provider name: Prefix
Description: The “YYYY/MM/DD/HH” time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects.
role_arn
Type: STRING
Provider name: RoleARN
Description: The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more information, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces.
secrets_manager_configuration
Type: STRUCT
Provider name: SecretsManagerConfiguration
Description: The configuration that defines how you access secrets for Splunk.
enabled
Type: BOOLEAN
Provider name: Enabled
Description: Specifies whether you want to use the secrets manager feature. When set as True the secrets manager configuration overwrites the existing secrets in the destination configuration. When it’s set to False Firehose falls back to the credentials in the destination configuration.
role_arn
Type: STRING
Provider name: RoleARN
Description: Specifies the role that Firehose assumes when calling the Secrets Manager API operation. When you provide the role, it overrides any destination specific role defined in the destination configuration. If you do not provide the then we use the destination specific role. This parameter is required for Splunk.
secret_arn
Type: STRING
Provider name: SecretARN
Description: The ARN of the secret that stores your credentials. It must be in the same region as the Firehose stream and the role. The secret ARN can reside in a different account than the Firehose stream and role as Firehose supports cross-account secret access. This parameter is required when Enabled is set to True.
failure_description
Type: STRUCT
Provider name: FailureDescription
Description: Provides details in case one of the following operations fails due to an error related to KMS: CreateDeliveryStream, DeleteDeliveryStream, StartDeliveryStreamEncryption, StopDeliveryStreamEncryption.
details
Type: STRING
Provider name: Details
Description: A message providing details about the error that caused the failure.
type
Type: STRING
Provider name: Type
Description: The type of error that caused the failure.
has_more_destinations
Type: BOOLEAN
Provider name: HasMoreDestinations
Description: Indicates whether there are more destinations available to list.
last_update_timestamp
Type: TIMESTAMP
Provider name: LastUpdateTimestamp
Description: The date and time that the Firehose stream was last updated.
Type: UNORDERED_LIST_STRING
version_id
Type: STRING
Provider name: VersionId
Description: Each time the destination is updated for a Firehose stream, the version ID is changed, and the current version ID is required when updating the destination. This is so that the service knows it is applying the changes to the correct version of the delivery stream.
