Overview

HTTP tests allow you to send HTTP requests to your applications’ API endpoints to verify responses and defined conditions, such as overall response time, expected status code, header, or body content.

HTTP tests can run from both managed and private locations depending on your preference for running the test from outside or inside your network. HTTP tests can run on a schedule, on-demand, or directly within your CI/CD pipelines.

Configuration

After choosing to create an HTTP test, define your test’s request.

Define request

1. Choose the HTTP Method and specify the URL to query. Available methods are: GET, POST, PATCH, PUT, HEAD, DELETE, and OPTIONS. Both http and https URLs are supported.

2. Enrich your HTTP request with Advanced Options (optional):

   • HTTP version: Select HTTP/1.1 only, HTTP/2 only, or HTTP/2 fallback to HTTP/1.1.
   • Follow redirects: Select to have your HTTP test follow up to ten redirects when performing the request.
   • Ignore server certificate error: Select to have your HTTP test go on with connection even if there are errors when validating the SSL certificate.
   • Timeout: Specify the amount of time in seconds before the test times out.
   • Request headers: Define headers to add to your HTTP request. You can also override the default headers (for example, the user-agent header).
   • Cookies: Define cookies to add to your HTTP request. Set multiple cookies using the format <COOKIE_NAME1>=<COOKIE_VALUE1>; <COOKIE_NAME2>=<COOKIE_VALUE2>.

   • Client Certificate: Authenticate through mTLS by uploading your client certificate (.crt) and the associated private key (.key) in PEM format. You can use the openssl library to convert your certificates. For example, convert a PKCS12 certificate to PEM formatted private keys and certificates.

     openssl pkcs12 -in <CERT>.p12 -out <CERT_KEY>.key -nodes -nocerts
     openssl pkcs12 -in <CERT>.p12 -out <CERT>.cert -nokeys
     

   • HTTP Basic Auth: Add HTTP basic authentication credentials.

   • Digest Auth: Add Digest authentication credentials.

   • NTLM: Add NTLM authentication credentials. Support both NTLMv2 and NTLMv1.

   • AWS Signature v4: Enter your Access Key ID and Secret Access Key. Datadog generates the signature for your request. This option uses the basic implementation of SigV4. Specific signatures such as Amazon S3 are not supported out-of-the box.
     For “Single Chunk” transfer requests to Amazon S3 buckets, add x-amz-content-sha256 containing the sha256-encoded body of the request as a header (for an empty body: x-amz-content-sha256: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855).

   • OAuth 2.0: Choose between granting client credentials or a resource owner password and enter an access token URL. Depending on your selection, enter a client ID and secret, or a username and password. From the dropdown menu, select an option to either send the API token as a basic authentication header, or send the client credentials in the body. Optionally, you can provide additional information such as the audience, resource, and scope (as well as the client ID and secret, if you selected Resource Owner Password).

   • Encode parameters: Add the name and value of query parameters that require encoding.

   • Body type: Select the type of the request body (application/json, application/octet-stream, application/x-www-form-urlencoded, multipart/form-data, text/html, text/plain, text/xml, GraphQL, or None) you want to add to your HTTP request.
   • Request body: Add the content of your HTTP request body.
     • The request body is limited to a maximum size of 50 kilobytes for application/json, application/x-www-form-urlencoded, text/html, text/plain, text/xml, GraphQL.
     • The request body is limited to one file of 3 megabytes for application/octet-stream.
     • The request body is limited to three files of 3 megabytes each for multipart/form-data.

   • Proxy URL: Specify the URL of the proxy the HTTP request should go through (http://<YOUR_USER>:<YOUR_PWD>@<YOUR_IP>:<YOUR_PORT>).
   • Proxy header: Add headers to include in the HTTP request to the proxy.

   • Do not save response body: Select this option to prevent response body from being saved at runtime. This can be helpful to ensure no sensitive data gets featured in your test results. Use mindfully as it can make failures troubleshooting more difficult. For more security recommendations, see Synthetic Monitoring Security.

3. Name your HTTP test.

4. Add env Tags as well as any other tag to your HTTP test. You can then use these tags to filter through your Synthetic tests on the Synthetic Monitoring & Continuous Testing page.

Click Test URL to try out the request configuration. A response preview is displayed on the right side of your screen.

Define assertions

Assertions define what an expected test result is. After you click Test URL, basic assertions on response time, status code, and header content-type are added based on the response that was obtained. You must define at least one assertion for your test to monitor.

HTTP tests can decompress bodies with the following content-encoding headers: br, deflate, gzip, and identity.

You can create up to 20 assertions per API test by clicking New Assertion or by clicking directly on the response preview:

To perform OR logic in an assertion, use the matches regex comparator to define a regex with multiple expected values like (200|302). For example, you may want your HTTP test to succeed when a server must respond with a 200 or 302 status code. The status code assertion succeeds if the status code is 200 or 302. You can also add OR logic on a body or header assertion.

If a test does not contain an assertion on the response body, the body payload drops and returns an associated response time for the request within the timeout limit set by the Synthetics Worker.

If a test contains an assertion on the response body and the timeout limit is reached, an Assertions on the body/response cannot be run beyond this limit error appears.

Select locations

Select the Locations to run your HTTP test from. HTTP tests can run from both managed and private locations depending on your preference for running the test from outside or inside your network.

Datadog’s out-of-the-box managed locations allow you to test public-facing websites and endpoints from regions where your customers are located.

The Datadog for Government site (US1-FED) uses the following managed location:

Specify test frequency

HTTP tests can run:

• On a schedule to ensure your most important endpoints are always accessible to your users. Select the frequency at which you want Datadog to run your HTTP test.
• Within your CI/CD pipelines to start shipping without fearing faulty code might impact your customers’ experience.
• On-demand to run your tests whenever makes the most sense for your team.

Define alert conditions

Set alert conditions to determine the circumstances under which you want a test to fail and trigger an alert.

Alerting rule

When you set the alert conditions to: An alert is triggered if any assertion fails for X minutes from any n of N locations, an alert is triggered only if these two conditions are true:

• At least one location was in failure (at least one assertion failed) during the last X minutes;
• At one moment during the last X minutes, at least n locations were in failure.

Fast retry

Your test can trigger retries X times after Y ms in case of a failed test result. Customize the retry interval to suit your alerting sensibility.

Location uptime is computed on a per-evaluation basis (whether the last test result before evaluation was up or down). The total uptime is computed based on the configured alert conditions. Notifications sent are based on the total uptime.

Configure the test monitor

A notification is sent by your test based on the alerting conditions previously defined. Use this section to define how and what to message your team.

1. Similar to how you configure monitors, select users and/or services that should receive notifications either by adding an @notification to the message or by searching for team members and connected integrations with the dropdown menu.

2. Enter the notification message for your test. This field allows standard Markdown formatting and supports the following conditional variables:

   Conditional Variable	Description
   {{ #is_alert }}	Show when the test alerts.
   {{ ^is_alert }}	Show unless the test alerts.
   {{ #is_recovery }}	Show when the test recovers from alert.
   {{ ^is_recovery }}	Show unless the test recovers from alert.
   {{ #is_renotify }}	Show when the monitor renotifies.
   {{ ^is_renotify }}	Show unless the monitor renotifies.
   {{ #is_priority }}	Show when the monitor matches priority (P1 to P5).
   {{ ^is_priority }}	Show unless the monitor matches priority (P1 to P5).

3. Specify how often you want your test to re-send the notification message in case of test failure. To prevent renotification on failing tests, leave the option as Never renotify if the monitor has not been resolved.

4. Click Create to save your test configuration and monitor.

For more information, see Using Synthetic Test Monitors.

Variables

Create local variables

To create a local variable, click Create a Local Variable. You can select one of the following available builtins to add to your variable string:

{{ numeric(n) }}

Generates a numeric string with n digits.

{{ alphabetic(n) }}

Generates an alphabetic string with n letters.

{{ alphanumeric(n) }}

Generates an alphanumeric string with n characters.

{{ date(n unit, format) }}

Generates a date in one of Datadog’s accepted formats with a value corresponding to the UTC date the test is initiated at + or - n units.

{{ timestamp(n, unit) }}

Generates a timestamp in one of Datadog’s accepted units with a value corresponding to the UTC timestamp the test is initiated at +/- n units.

{{ uuid }}

Generates a version 4 universally unique identifier (UUID).

To obfuscate local variable values in test results, select Hide and obfuscate variable value. Once you have defined the variable string, click Add Variable.

Use variables

You can use the global variables defined on the Settings page in the URL, advanced options, and assertions of your HTTP tests.

To display your list of variables, type {{ in your desired field:

Test failure

A test is considered FAILED if it does not satisfy one or more assertions or if the request prematurely failed. In some cases, the test can fail without testing the assertions against the endpoint.

The most common errors include the following:

CONNREFUSED

No connection could be made because the target machine actively refused it.

CONNRESET

The connection was abruptly closed by the remote server. Possible causes include the web server encountering an error or crashing while responding, or loss of connectivity of the web server.

DNS

DNS entry not found for the test URL. Possible causes include misconfigured test URL or the wrong configuration of your DNS entries.

INVALID_REQUEST

The configuration of the test is invalid (for example, a typo in the URL).

SSL

The SSL connection couldn’t be performed. See the dedicated error page for more information.

TIMEOUT

The request couldn’t be completed in a reasonable time. Two types of TIMEOUT can happen:

• TIMEOUT: The request couldn't be completed in a reasonable time. indicates that the request duration hit the test defined timeout (default is set to 60s). For each request only the completed stages for the request are displayed in the network waterfall. For example, in the case of Total response time only being displayed, the timeout occurred during the DNS resolution.
• TIMEOUT: Overall test execution couldn't be completed in a reasonable time. indicates that the test duration (request + assertions) hits the maximum duration (60.5s).

MALFORMED_RESPONSE

The remote server responded with a payload that does not comply with HTTP specifications.

Permissions

By default, only users with the Datadog Admin and Datadog Standard roles can create, edit, and delete Synthetic HTTP tests. To get create, edit, and delete access to Synthetic HTTP tests, upgrade your user to one of those two default roles.

If you are using the custom role feature, add your user to any custom role that includes synthetics_read and synthetics_write permissions.

Restrict access

Access restriction is available for customers using custom roles on their accounts.

You can restrict access to an HTTP test based on the roles in your organization. When creating an HTTP test, choose which roles (in addition to your user) can read and write your test.

Further Reading

Additional helpful documentation, links, and articles:

Introducing Datadog Synthetic MonitoringBLOG Introduction to Synthetic TestsLEARNING CENTER Get started with HTTP testsDOCUMENTATION Run HTTP tests on internal endpointsDOCUMENTATION Run multistep HTTP testsDOCUMENTATION Learn about Synthetic test monitorsDOCUMENTATION