Netnology Cisco SD-WAN

Supported OS Linux Windows Mac OS

통합 버전1.0.1
이 페이지는 아직 한국어로 제공되지 않으며 번역 작업 중입니다. 번역에 관한 질문이나 의견이 있으시면 언제든지 저희에게 연락해 주십시오.

Overview

This check monitors Cisco SD-WAN controllers through the Datadog Agent using an SD-WAN platform provided by Netnology. The check enables users to monitor the network health and performance of multiple Cisco SD-WAN controllers simultaneously. Collected information can then be used for aggregated dashboarding and notifications on configured monitors/alerts.

Currently, only Cisco vManage devices are supported as SD-WAN controller targets.

Setup

The Netnology Cisco SD-WAN integration is not included in the Datadog Agent package, so you need to install it manually.

Installation

For Agent v7.21+ / v6.21+, follow the instructions below to install the check on your host. See Use Community Integrations to install with the Docker Agent or earlier versions of the Agent.

  1. Run the following command to install the Agent integration:

    datadog-agent integration install -t nn_sdwan==1.0.1

  2. Configure your integration similar to core integrations.

Configuration

  1. Edit the nn_sdwan.d/conf.yaml file in the conf.d/ folder at the root of your Agent’s configuration directory to start collecting your Cisco SD-WAN performance data. See sample nn_sdwan.d/conf.yaml for all available configuration options.

  2. Restart the Agent.

Validation

Run the Agent’s status subcommand and look for nn_sdwan under the Checks section.

Data Collected

Metrics

nn_sdwan.app_aware_routing.jitter
(gauge)		The change in latency for packets when traversing a link
Shown as millisecond
nn_sdwan.app_aware_routing.latency
(gauge)		The time required for packets to traverse a link
Shown as millisecond
nn_sdwan.app_aware_routing.loss_percentage
(gauge)		The percentage of packets lost during transmission
Shown as percent
nn_sdwan.app_aware_routing.rx_octets
(gauge)		The number of octets received on a link
Shown as byte
nn_sdwan.app_aware_routing.tx_octets
(gauge)		The number of octets transmitted on a link
Shown as byte
nn_sdwan.cert_summary
(gauge)		The number of normal, warning, and invalid certificates
nn_sdwan.connection_summary_stats_error
(gauge)		The number of certificate errors for WAN edges, vBond devices, and vSmart devices
nn_sdwan.connection_summary_stats_total
(gauge)		The number of certificates for WAN edges, vBond devices, and vSmart devices
nn_sdwan.device_control_status
(gauge)		The number of devices that are up, partially up, and/or down
nn_sdwan.reboot_count
(gauge)		The number of times in the past 24 hours that the controller has rebooted
nn_sdwan.site_health
(gauge)		The number of sites that are up, contain warnings, and/or are down
nn_sdwan.top_app_stats
(gauge)		The number of bytes sent across a link by application
Shown as byte
nn_sdwan.transport_interface
(gauge)		The number of links with active throughput within a particular range
nn_sdwan.vmanage_count
(gauge)		The number of devices for each status
nn_sdwan.wan_edge_health
(gauge)		The number of normal, warning and error WAN edges
nn_sdwan.wan_edge_inventory
(gauge)		The number of deployed, authorized, staging, and total WAN edges

Events

The Netnology Cisco SD-WAN integration does not include any events.

Service Checks

nn_sdwan.sdwan_controller.online
Returns CRITICAL if the remote host cannot be pinged, WARNING if the controller can be pinged but is not responding to API calls, and OK otherwise.
Statuses: ok, warning, critical

Troubleshooting

Need help? Contact Datadog support.