HyperV

Supported OS

통합 버전3.0.0

To find out if this integration is available in your organization, see your Datadog Integrations page or ask your organization administrator.

To initiate an exception request to enable this integration for your organization, email support@ddog-gov.com.

개요

이 점검은 Datadog Agent를 통해 Hyper-V를 모니터링합니다.

설정

설치

Hyper-V 점검은 Datadog Agent 패키지에 포함되어 있어 서버에 추가 설치가 필요하지 않습니다.

설정

  1. Hyper-V 성능 데이터를 수집하려면 Agent의 구성 디렉터리 루트에 있는 conf.d/ 폴더에서 hyperv.d/conf.yaml 파일을 편집합니다. 사용 가능한 모든 구성 옵션은 샘플 hyperv.d/conf.yaml을 참조하세요.

  2. 에이전트를 재시작합니다.

참고: 이 점검의 1.5.0 이상 버전에서는 메트릭 수집을 위한 새로운 구현을 사용하므로 Python 3이 필요합니다. Python 3을 사용할 수 없는 호스트의 경우 또는 이 점검의 레거시 버전을 사용하려는 경우 다음 config를 참조하세요.

검증

Agent의 상태 하위 명령을 실행하고 Checks 섹션에서 hyperv를 찾습니다.

수집한 데이터

메트릭

hyperv.dynamic_memory_balancer.available_memory
(gauge)
The amount of memory left on the node.
Shown as byte
hyperv.dynamic_memory_balancer.average_pressure
(gauge)
This counter represents the average pressure in the VM.
Shown as percent
hyperv.hypervisor_logical_processor.context_switches_per_sec
(gauge)
The combined rate at which all processors on the computer are switched from one thread to another.
Shown as operation
hyperv.hypervisor_logical_processor.guest_run_time
(gauge)
The percentage of time spent by the processor in guest code.
Shown as percent
hyperv.hypervisor_logical_processor.hypervisor_run_time
(gauge)
The percentage of time spent by the processor in hypervisor code.
Shown as percent
hyperv.hypervisor_logical_processor.idle_time
(gauge)
The percentage of time spent by the processor in an idle state.
Shown as percent
hyperv.hypervisor_logical_processor.total_run_time
(gauge)
The percentage of time spent by the processor in guest and hypervisor code.
Shown as percent
hyperv.hypervisor_root_virtual_processor.guest_run_time
(gauge)
The percentage of time spent by the virtual processor in guest code.
Shown as percent
hyperv.hypervisor_root_virtual_processor.hypervisor_run_time
(gauge)
The percentage of time spent by the virtual processor in hypervisor code.
Shown as percent
hyperv.hypervisor_root_virtual_processor.total_run_time
(gauge)
The percentage of time spent by the virtual processor in guest and hypervisor code.
Shown as percent
hyperv.hypervisor_virtual_processor.guest_run_time
(gauge)
The percentage of time spent by the virtual processor in guest code.
Shown as percent
hyperv.hypervisor_virtual_processor.hypervisor_run_time
(gauge)
The percentage of time spent by the virtual processor in hypervisor code.
Shown as percent
hyperv.hypervisor_virtual_processor.total_run_time
(gauge)
The percentage of time spent by the virtual processor in guest and hypervisor code.
Shown as percent
hyperv.virtual_network_adapter.bytes_per_sec
(gauge)
The rate at which bytes are sent and received over each network adapter.
Shown as byte
hyperv.vm_vid_partition.physical_pages_allocated
(gauge)
The number of physical pages allocated.
Shown as block
hyperv.vm_vid_partition.remote_physical_pages
(gauge)
The number of physical pages not allocated from the preferred NUMA node.
Shown as block

서비스 점검

Hyper-V는 서비스 점검을 포함하지 않습니다.

이벤트

Hyper-V는 이벤트를 포함하지 않습니다.

트러블슈팅

도움이 필요하신가요? Datadog 지원팀에 문의하세요.

참고 자료

기타 유용한 문서, 링크 및 기사: