Google Cloud Interconnect

이 페이지는 아직 한국어로 제공되지 않으며 번역 작업 중입니다. 번역에 관한 질문이나 의견이 있으시면 언제든지 저희에게 연락해 주십시오.

Overview

Google Cloud Interconnect extends your on-premises network to Google’s network through a highly available, low latency connection.

Use the Datadog Google Cloud Platform integration to collect metrics from Google Cloud Interconnect.

Setup

Installation

If you haven’t already, set up the Google Cloud Platform integration first. There are no other installation steps.

Log collection

Google Cloud Interconnect logs are collected with Google Cloud Logging and sent to a Dataflow job through a Cloud Pub/Sub topic. If you haven’t already, set up logging with the Datadog Dataflow template.

Once this is done, export your Google Cloud Interconnect logs from Google Cloud Logging to the Pub/Sub topic:

  1. Go to the Google Cloud Logging page and filter the Google Cloud Interconnect logs.
  2. Click Create Export and name the sink.
  3. Choose “Cloud Pub/Sub” as the destination and select the Pub/Sub topic that was created for that purpose. Note: The Pub/Sub topic can be located in a different project.
  4. Click Create and wait for the confirmation message to show up.

Data Collected

Metrics

gcp.interconnect.network.attachment.capacity
(gauge)		Network capacity of the attachment
gcp.interconnect.network.attachment.received_bytes_count
(count)		Number of inbound bytes received.
Shown as byte
gcp.interconnect.network.attachment.received_packets_count
(count)		Number of inbound packets received.
Shown as packet
gcp.interconnect.network.attachment.sent_bytes_count
(count)		Number of outbound bytes sent.
Shown as byte
gcp.interconnect.network.attachment.sent_packets_count
(count)		Number of outbound packets sent.
Shown as packet
gcp.interconnect.network.interconnect.capacity
(gauge)		Active capacity of the interconnect.
Shown as byte
gcp.interconnect.network.interconnect.dropped_packets_count
(count)		Number of outbound packets dropped due to link congestion.
Shown as packet
gcp.interconnect.network.interconnect.link.operational
(gauge)		Whether the operational status of the circuit is up.
gcp.interconnect.network.interconnect.link.rx_power
(gauge)		Light level received over physical circuit.
gcp.interconnect.network.interconnect.link.tx_power
(gauge)		Light level transmitted over physical circuit.
gcp.interconnect.network.interconnect.operational
(gauge)		Whether the operational status of the interconnect is up.
gcp.interconnect.network.interconnect.receive_errors_count
(count)		Number of errors encountered while receiving packets.
Shown as error
gcp.interconnect.network.interconnect.received_bytes_count
(count)		Number of inbound bytes received.
Shown as byte
gcp.interconnect.network.interconnect.received_unicast_packets_count
(count)		Number of inbound unicast packets received.
Shown as packet
gcp.interconnect.network.interconnect.send_errors_count
(count)		Number of errors encountered while sending packets.
Shown as error
gcp.interconnect.network.interconnect.sent_bytes_count
(count)		Number of outbound bytes sent.
Shown as byte
gcp.interconnect.network.interconnect.sent_unicast_packets_count
(count)		Number of outbound unicast packets sent.
Shown as packet

Events

The Google Cloud Interconnect integration does not include any events.

Service Checks

The Google Cloud Interconnect integration does not include any service checks.

Troubleshooting

Need help? Contact Datadog support.