이 페이지는 아직 영어로 제공되지 않습니다. 번역 작업 중입니다.
현재 번역 프로젝트에 대한 질문이나 피드백이 있으신 경우 언제든지 연락주시기 바랍니다.

gcp_netapp_volume

`active_directory`

Type: STRING
Provider name: activeDirectory
Description: Output only. Specifies the ActiveDirectory name of a SMB volume.

`ancestors`

Type: UNORDERED_LIST_STRING

`backup_config`

Type: STRUCT
Provider name: backupConfig
Description: BackupConfig of the volume.

backup_chain_bytes
Type: INT64
Provider name: backupChainBytes
Description: Output only. Total size of all backups in a chain in bytes = baseline backup size + sum(incremental backup size).
backup_policies
Type: UNORDERED_LIST_STRING
Provider name: backupPolicies
Description: Optional. When specified, schedule backups will be created based on the policy configuration.
backup_vault
Type: STRING
Provider name: backupVault
Description: Optional. Name of backup vault. Format: projects/{project_id}/locations/{location}/backupVaults/{backup_vault_id}
scheduled_backup_enabled
Type: BOOLEAN
Provider name: scheduledBackupEnabled
Description: Optional. When set to true, scheduled backup is enabled on the volume. This field should be nil when there’s no backup policy attached.

`capacity_gib`

Type: INT64
Provider name: capacityGib
Description: Required. Capacity in GIB of the volume

`cold_tier_size_gib`

Type: INT64
Provider name: coldTierSizeGib
Description: Output only. Size of the volume cold tier data in GiB.

`create_time`

Type: TIMESTAMP
Provider name: createTime
Description: Output only. Create time of the volume

`description`

Type: STRING
Provider name: description
Description: Optional. Description of the volume

`encryption_type`

Type: STRING
Provider name: encryptionType
Description: Output only. Specified the current volume encryption key source.
Possible values:

ENCRYPTION_TYPE_UNSPECIFIED - The source of the encryption key is not specified.
SERVICE_MANAGED - Google managed encryption key.
CLOUD_KMS - Customer managed encryption key, which is stored in KMS.

`export_policy`

Type: STRUCT
Provider name: exportPolicy
Description: Optional. Export policy of the volume

rules
Type: UNORDERED_LIST_STRUCT
Provider name: rules
Description: Required. List of export policy rules
- access_type
  Type: STRING
  Provider name: accessType
  Description: Access type (ReadWrite, ReadOnly, None)
  Possible values:
  - ACCESS_TYPE_UNSPECIFIED - Unspecified Access Type
  - READ_ONLY - Read Only
  - READ_WRITE - Read Write
  - READ_NONE - None
- allowed_clients
  Type: STRING
  Provider name: allowedClients
  Description: Comma separated list of allowed clients IP addresses
- has_root_access
  Type: STRING
  Provider name: hasRootAccess
  Description: Whether Unix root access will be granted.
- kerberos5_read_only
  Type: BOOLEAN
  Provider name: kerberos5ReadOnly
  Description: If enabled (true) the rule defines a read only access for clients matching the ‘allowedClients’ specification. It enables nfs clients to mount using ‘authentication’ kerberos security mode.
- kerberos5_read_write
  Type: BOOLEAN
  Provider name: kerberos5ReadWrite
  Description: If enabled (true) the rule defines read and write access for clients matching the ‘allowedClients’ specification. It enables nfs clients to mount using ‘authentication’ kerberos security mode. The ‘kerberos5ReadOnly’ value be ignored if this is enabled.
- kerberos5i_read_only
  Type: BOOLEAN
  Provider name: kerberos5iReadOnly
  Description: If enabled (true) the rule defines a read only access for clients matching the ‘allowedClients’ specification. It enables nfs clients to mount using ‘integrity’ kerberos security mode.
- kerberos5i_read_write
  Type: BOOLEAN
  Provider name: kerberos5iReadWrite
  Description: If enabled (true) the rule defines read and write access for clients matching the ‘allowedClients’ specification. It enables nfs clients to mount using ‘integrity’ kerberos security mode. The ‘kerberos5iReadOnly’ value be ignored if this is enabled.
- kerberos5p_read_only
  Type: BOOLEAN
  Provider name: kerberos5pReadOnly
  Description: If enabled (true) the rule defines a read only access for clients matching the ‘allowedClients’ specification. It enables nfs clients to mount using ‘privacy’ kerberos security mode.
- kerberos5p_read_write
  Type: BOOLEAN
  Provider name: kerberos5pReadWrite
  Description: If enabled (true) the rule defines read and write access for clients matching the ‘allowedClients’ specification. It enables nfs clients to mount using ‘privacy’ kerberos security mode. The ‘kerberos5pReadOnly’ value be ignored if this is enabled.
- nfsv3
  Type: BOOLEAN
  Provider name: nfsv3
  Description: NFS V3 protocol.
- nfsv4
  Type: BOOLEAN
  Provider name: nfsv4
  Description: NFS V4 protocol.

`has_replication`

Type: BOOLEAN
Provider name: hasReplication
Description: Output only. Indicates whether the volume is part of a replication relationship.

`hybrid_replication_parameters`

Type: STRUCT
Provider name: hybridReplicationParameters
Description: Optional. The Hybrid Replication parameters for the volume.

cluster_location
Type: STRING
Provider name: clusterLocation
Description: Optional. Name of source cluster location associated with the Hybrid replication. This is a free-form field for the display purpose only.
description
Type: STRING
Provider name: description
Description: Optional. Description of the replication.
peer_cluster_name
Type: STRING
Provider name: peerClusterName
Description: Required. Name of the user’s local source cluster to be peered with the destination cluster.
peer_ip_addresses
Type: UNORDERED_LIST_STRING
Provider name: peerIpAddresses
Description: Required. List of node ip addresses to be peered with.
peer_svm_name
Type: STRING
Provider name: peerSvmName
Description: Required. Name of the user’s local source vserver svm to be peered with the destination vserver svm.
peer_volume_name
Type: STRING
Provider name: peerVolumeName
Description: Required. Name of the user’s local source volume to be peered with the destination volume.
replication
Type: STRING
Provider name: replication
Description: Required. Desired name for the replication of this volume.

`kerberos_enabled`

Type: BOOLEAN
Provider name: kerberosEnabled
Description: Optional. Flag indicating if the volume is a kerberos volume or not, export policy rules control kerberos security modes (krb5, krb5i, krb5p).

`kms_config`

Type: STRING
Provider name: kmsConfig
Description: Output only. Specifies the KMS config to be used for volume encryption.

`labels`

Type: UNORDERED_LIST_STRING

`large_capacity`

Type: BOOLEAN
Provider name: largeCapacity
Description: Optional. Flag indicating if the volume will be a large capacity volume or a regular volume.

`ldap_enabled`

Type: BOOLEAN
Provider name: ldapEnabled
Description: Output only. Flag indicating if the volume is NFS LDAP enabled or not.

`mount_options`

Type: UNORDERED_LIST_STRUCT
Provider name: mountOptions
Description: Output only. Mount options of this volume

export
Type: STRING
Provider name: export
Description: Export string
export_full
Type: STRING
Provider name: exportFull
Description: Full export string
instructions
Type: STRING
Provider name: instructions
Description: Instructions for mounting
ip_address
Type: STRING
Provider name: ipAddress
Description: Output only. IP Address.
protocol
Type: STRING
Provider name: protocol
Description: Protocol to mount with.
Possible values:
- PROTOCOLS_UNSPECIFIED - Unspecified protocol
- NFSV3 - NFS V3 protocol
- NFSV4 - NFS V4 protocol
- SMB - SMB protocol

`multiple_endpoints`

Type: BOOLEAN
Provider name: multipleEndpoints
Description: Optional. Flag indicating if the volume will have an IP address per node for volumes supporting multiple IP endpoints. Only the volume with large_capacity will be allowed to have multiple endpoints.

`name`

Type: STRING
Provider name: name
Description: Identifier. Name of the volume

`network`

Type: STRING
Provider name: network
Description: Output only. VPC Network name. Format: projects/{project}/global/networks/{network}

`organization_id`

Type: STRING

`parent`

Type: STRING

`project_id`

Type: STRING

`project_number`

Type: STRING

`protocols`

Type: UNORDERED_LIST_STRING
Provider name: protocols
Description: Required. Protocols required for the volume

`psa_range`

Type: STRING
Provider name: psaRange
Description: Output only. This field is not implemented. The values provided in this field are ignored.

`replica_zone`

Type: STRING
Provider name: replicaZone
Description: Output only. Specifies the replica zone for regional volume.

`resource_name`

Type: STRING

`restore_parameters`

Type: STRUCT
Provider name: restoreParameters
Description: Optional. Specifies the source of the volume to be created from.

source_backup
Type: STRING
Provider name: sourceBackup
Description: Full name of the backup resource. Format: projects/{project}/locations/{location}/backupVaults/{backup_vault_id}/backups/{backup_id}
source_snapshot
Type: STRING
Provider name: sourceSnapshot
Description: Full name of the snapshot resource. Format: projects/{project}/locations/{location}/volumes/{volume}/snapshots/{snapshot}

`restricted_actions`

Type: UNORDERED_LIST_STRING
Provider name: restrictedActions
Description: Optional. List of actions that are restricted on this volume.

`security_style`

Type: STRING
Provider name: securityStyle
Description: Optional. Security Style of the Volume
Possible values:

SECURITY_STYLE_UNSPECIFIED - SecurityStyle is unspecified
NTFS - SecurityStyle uses NTFS
UNIX - SecurityStyle uses UNIX

`service_level`

Type: STRING
Provider name: serviceLevel
Description: Output only. Service level of the volume
Possible values:

SERVICE_LEVEL_UNSPECIFIED - Unspecified service level.
PREMIUM - Premium service level.
EXTREME - Extreme service level.
STANDARD - Standard service level.
FLEX - Flex service level.

`share_name`

Type: STRING
Provider name: shareName
Description: Required. Share name of the volume

`smb_settings`

Type: UNORDERED_LIST_STRING
Provider name: smbSettings
Description: Optional. SMB share settings for the volume.

`snap_reserve`

Type: DOUBLE
Provider name: snapReserve
Description: Optional. Snap_reserve specifies percentage of volume storage reserved for snapshot storage. Default is 0 percent.

`snapshot_directory`

Type: BOOLEAN
Provider name: snapshotDirectory
Description: Optional. Snapshot_directory if enabled (true) the volume will contain a read-only .snapshot directory which provides access to each of the volume’s snapshots.

`snapshot_policy`

Type: STRUCT
Provider name: snapshotPolicy
Description: Optional. SnapshotPolicy for a volume.

daily_schedule
Type: STRUCT
Provider name: dailySchedule
Description: Daily schedule policy.
- hour
  Type: DOUBLE
  Provider name: hour
  Description: Set the hour to start the snapshot (0-23), defaults to midnight (0).
- minute
  Type: DOUBLE
  Provider name: minute
  Description: Set the minute of the hour to start the snapshot (0-59), defaults to the top of the hour (0).
- snapshots_to_keep
  Type: DOUBLE
  Provider name: snapshotsToKeep
  Description: The maximum number of Snapshots to keep for the hourly schedule
enabled
Type: BOOLEAN
Provider name: enabled
Description: If enabled, make snapshots automatically according to the schedules. Default is false.
hourly_schedule
Type: STRUCT
Provider name: hourlySchedule
Description: Hourly schedule policy.
- minute
  Type: DOUBLE
  Provider name: minute
  Description: Set the minute of the hour to start the snapshot (0-59), defaults to the top of the hour (0).
- snapshots_to_keep
  Type: DOUBLE
  Provider name: snapshotsToKeep
  Description: The maximum number of Snapshots to keep for the hourly schedule
monthly_schedule
Type: STRUCT
Provider name: monthlySchedule
Description: Monthly schedule policy.
- days_of_month
  Type: STRING
  Provider name: daysOfMonth
  Description: Set the day or days of the month to make a snapshot (1-31). Accepts a comma separated number of days. Defaults to ‘1’.
- hour
  Type: DOUBLE
  Provider name: hour
  Description: Set the hour to start the snapshot (0-23), defaults to midnight (0).
- minute
  Type: DOUBLE
  Provider name: minute
  Description: Set the minute of the hour to start the snapshot (0-59), defaults to the top of the hour (0).
- snapshots_to_keep
  Type: DOUBLE
  Provider name: snapshotsToKeep
  Description: The maximum number of Snapshots to keep for the hourly schedule
weekly_schedule
Type: STRUCT
Provider name: weeklySchedule
Description: Weekly schedule policy.
- day
  Type: STRING
  Provider name: day
  Description: Set the day or days of the week to make a snapshot. Accepts a comma separated days of the week. Defaults to ‘Sunday’.
- hour
  Type: DOUBLE
  Provider name: hour
  Description: Set the hour to start the snapshot (0-23), defaults to midnight (0).
- minute
  Type: DOUBLE
  Provider name: minute
  Description: Set the minute of the hour to start the snapshot (0-59), defaults to the top of the hour (0).
- snapshots_to_keep
  Type: DOUBLE
  Provider name: snapshotsToKeep
  Description: The maximum number of Snapshots to keep for the hourly schedule

`state`

Type: STRING
Provider name: state
Description: Output only. State of the volume
Possible values:

STATE_UNSPECIFIED - Unspecified Volume State
READY - Volume State is Ready
CREATING - Volume State is Creating
DELETING - Volume State is Deleting
UPDATING - Volume State is Updating
RESTORING - Volume State is Restoring
DISABLED - Volume State is Disabled
ERROR - Volume State is Error
PREPARING - Volume State is Preparing. Note that this is different from CREATING where CREATING means the volume is being created, while PREPARING means the volume is created and now being prepared for the replication.
READ_ONLY - Volume State is Read Only

`state_details`

Type: STRING
Provider name: stateDetails
Description: Output only. State details of the volume

`storage_pool`

Type: STRING
Provider name: storagePool
Description: Required. StoragePool name of the volume

`tags`

Type: UNORDERED_LIST_STRING

`tiering_policy`

Type: STRUCT
Provider name: tieringPolicy
Description: Tiering policy for the volume.

cooling_threshold_days
Type: INT32
Provider name: coolingThresholdDays
Description: Optional. Time in days to mark the volume’s data block as cold and make it eligible for tiering, can be range from 2-183. Default is 31.
tier_action
Type: STRING
Provider name: tierAction
Description: Optional. Flag indicating if the volume has tiering policy enable/pause. Default is PAUSED.
Possible values:
- TIER_ACTION_UNSPECIFIED - Unspecified.
- ENABLED - When tiering is enabled, new cold data will be tiered.
- PAUSED - When paused, tiering won’t be performed on new data. Existing data stays tiered until accessed.

`unix_permissions`

Type: STRING
Provider name: unixPermissions
Description: Optional. Default unix style permission (e.g. 777) the mount point will be created with. Applicable for NFS protocol types only.

`used_gib`

Type: INT64
Provider name: usedGib
Description: Output only. Used capacity in GIB of the volume. This is computed periodically and it does not represent the realtime usage.

`zone`

Type: STRING
Provider name: zone
Description: Output only. Specifies the active zone for regional volume.