Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default
このページは日本語には対応しておりません。随時翻訳に取り組んでいます。
翻訳に関してご質問やご意見ございましたら、
お気軽にご連絡ください。
Description
To set the runtime status of the net.ipv6.conf.default.accept_source_route
kernel parameter, run the following command:
$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d
:
net.ipv6.conf.default.accept_source_route = 0
Rationale
Source-routed packets allow the source of the packet to suggest routers
forward the packet along a different path than configured on the router, which can
be used to bypass network security measures. This requirement applies only to the
forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and
the system is functioning as a router.
Accepting source-routed packets in the IPv6 protocol has few legitimate
uses. It should be disabled unless it is absolutely required.
Shell script
The following script can be run on the host to remediate the issue.
#!/bin/bash
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then
# Comment out any occurrences of net.ipv6.conf.default.accept_source_route from /etc/sysctl.d/*.conf files
for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do
# skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi
matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_source_route.*$' $f | uniq )
if ! test -z "$matching_list"; then
while IFS= read -r entry; do
escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
# comment out "net.ipv6.conf.default.accept_source_route" matches to preserve user data
sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
done <<< "$matching_list"
fi
done
#
# Set sysctl config file which to save the desired value
#
SYSCONFIG_FILE="/etc/sysctl.conf"
sysctl_net_ipv6_conf_default_accept_source_route_value='0'
#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route="$sysctl_net_ipv6_conf_default_accept_source_route_value"
#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
# else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#
# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_source_route")
# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_source_route_value"
# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
fi
printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi
else
>&2 echo 'Remediation is not applicable, nothing was done'
fi
Ansible playbook
The following playbook can be run with Ansible to remediate the issue.
- name: List /etc/sysctl.d/*.conf files
find:
paths:
- /etc/sysctl.d/
- /run/sysctl.d/
- /usr/local/lib/sysctl.d/
contains: ^[\s]*net.ipv6.conf.default.accept_source_route.*$
patterns: '*.conf'
file_type: any
register: find_sysctl_d
when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-6(b)
- NIST-800-53-CM-6.1(iv)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- PCI-DSS-Req-1.4.3
- PCI-DSSv4-1.4.2
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv6_conf_default_accept_source_route
- name: Comment out any occurrences of net.ipv6.conf.default.accept_source_route from
config files
replace:
path: '{{ item.path }}'
regexp: ^[\s]*net.ipv6.conf.default.accept_source_route
replace: '#net.ipv6.conf.default.accept_source_route'
loop: '{{ find_sysctl_d.files }}'
when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-6(b)
- NIST-800-53-CM-6.1(iv)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- PCI-DSS-Req-1.4.3
- PCI-DSSv4-1.4.2
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv6_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_source_route_value # promote to variable
set_fact:
sysctl_net_ipv6_conf_default_accept_source_route_value: !!str 0
tags:
- always
- name: Ensure sysctl net.ipv6.conf.default.accept_source_route is set
sysctl:
name: net.ipv6.conf.default.accept_source_route
value: '{{ sysctl_net_ipv6_conf_default_accept_source_route_value }}'
sysctl_file: /etc/sysctl.conf
state: present
reload: true
when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-6(b)
- NIST-800-53-CM-6.1(iv)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- PCI-DSS-Req-1.4.3
- PCI-DSSv4-1.4.2
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv6_conf_default_accept_source_route