Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default
このページは日本語には対応しておりません。随時翻訳に取り組んでいます。
翻訳に関してご質問やご意見ございましたら、
お気軽にご連絡ください。
Description
To set the runtime status of the net.ipv4.conf.default.rp_filter
kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d
:
net.ipv4.conf.default.rp_filter = 1
Rationale
Enabling reverse path filtering drops packets with source addresses
that should not have been able to be received on the interface they were
received on. It should not be used on systems which are routers for
complicated networks, but is helpful for end hosts and routers serving small
networks.
Shell script
The following script can be run on the host to remediate the issue.
#!/bin/bash
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}
' 'kernel' 2>/dev/null | grep -q installed; then
# Comment out any occurrences of net.ipv4.conf.default.rp_filter from /etc/sysctl.d/*.conf files
for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do
# skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi
matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.rp_filter.*$' $f | uniq )
if ! test -z "$matching_list"; then
while IFS= read -r entry; do
escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
# comment out "net.ipv4.conf.default.rp_filter" matches to preserve user data
sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
done <<< "$matching_list"
fi
done
#
# Set sysctl config file which to save the desired value
#
SYSCONFIG_FILE="/etc/sysctl.conf"
sysctl_net_ipv4_conf_default_rp_filter_value='1'
#
# Set runtime for net.ipv4.conf.default.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter="$sysctl_net_ipv4_conf_default_rp_filter_value"
#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
# else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#
# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.rp_filter")
# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_rp_filter_value"
# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.rp_filter\\>" "${SYSCONFIG_FILE}"; then
escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
fi
printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi
else
>&2 echo 'Remediation is not applicable, nothing was done'
fi
Ansible playbook
The following playbook can be run with Ansible to remediate the issue.
- name: Gather the package facts
package_facts:
manager: auto
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-7(a)
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_default_rp_filter
- name: List /etc/sysctl.d/*.conf files
find:
paths:
- /etc/sysctl.d/
- /run/sysctl.d/
- /usr/local/lib/sysctl.d/
contains: ^[\s]*net.ipv4.conf.default.rp_filter.*$
patterns: '*.conf'
file_type: any
register: find_sysctl_d
when: '"kernel" in ansible_facts.packages'
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-7(a)
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_default_rp_filter
- name: Comment out any occurrences of net.ipv4.conf.default.rp_filter from config
files
replace:
path: '{{ item.path }}'
regexp: ^[\s]*net.ipv4.conf.default.rp_filter
replace: '#net.ipv4.conf.default.rp_filter'
loop: '{{ find_sysctl_d.files }}'
when: '"kernel" in ansible_facts.packages'
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-7(a)
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_default_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_default_rp_filter_value # promote to variable
set_fact:
sysctl_net_ipv4_conf_default_rp_filter_value: !!str 1
tags:
- always
- name: Ensure sysctl net.ipv4.conf.default.rp_filter is set
sysctl:
name: net.ipv4.conf.default.rp_filter
value: '{{ sysctl_net_ipv4_conf_default_rp_filter_value }}'
sysctl_file: /etc/sysctl.conf
state: present
reload: true
when: '"kernel" in ansible_facts.packages'
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-7(a)
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_default_rp_filter