Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces
このページは日本語には対応しておりません。随時翻訳に取り組んでいます。
翻訳に関してご質問やご意見ございましたら、
お気軽にご連絡ください。
Description
To set the runtime status of the net.ipv4.conf.all.send_redirects
kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d
:
net.ipv4.conf.all.send_redirects = 0
Rationale
ICMP redirect messages are used by routers to inform hosts that a more
direct route exists for a particular destination. These messages contain information
from the system’s route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.
Shell script
The following script can be run on the host to remediate the issue.
#!/bin/bash
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}
' 'kernel' 2>/dev/null | grep -q installed; then
# Comment out any occurrences of net.ipv4.conf.all.send_redirects from /etc/sysctl.d/*.conf files
for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do
# skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi
matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.send_redirects.*$' $f | uniq )
if ! test -z "$matching_list"; then
while IFS= read -r entry; do
escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
# comment out "net.ipv4.conf.all.send_redirects" matches to preserve user data
sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
done <<< "$matching_list"
fi
done
#
# Set sysctl config file which to save the desired value
#
SYSCONFIG_FILE="/etc/sysctl.conf"
#
# Set runtime for net.ipv4.conf.all.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects="0"
#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
# else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#
# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.send_redirects")
# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"
# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.send_redirects\\>" "${SYSCONFIG_FILE}"; then
escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
fi
printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi
else
>&2 echo 'Remediation is not applicable, nothing was done'
fi
Ansible playbook
The following playbook can be run with Ansible to remediate the issue.
- name: Gather the package facts
package_facts:
manager: auto
tags:
- CJIS-5.10.1.1
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-5
- NIST-800-53-SC-7(a)
- PCI-DSSv4-1.4
- PCI-DSSv4-1.4.5
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_all_send_redirects
- name: List /etc/sysctl.d/*.conf files
find:
paths:
- /etc/sysctl.d/
- /run/sysctl.d/
- /usr/local/lib/sysctl.d/
contains: ^[\s]*net.ipv4.conf.all.send_redirects.*$
patterns: '*.conf'
file_type: any
register: find_sysctl_d
when: '"kernel" in ansible_facts.packages'
tags:
- CJIS-5.10.1.1
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-5
- NIST-800-53-SC-7(a)
- PCI-DSSv4-1.4
- PCI-DSSv4-1.4.5
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_all_send_redirects
- name: Comment out any occurrences of net.ipv4.conf.all.send_redirects from config
files
replace:
path: '{{ item.path }}'
regexp: ^[\s]*net.ipv4.conf.all.send_redirects
replace: '#net.ipv4.conf.all.send_redirects'
loop: '{{ find_sysctl_d.files }}'
when: '"kernel" in ansible_facts.packages'
tags:
- CJIS-5.10.1.1
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-5
- NIST-800-53-SC-7(a)
- PCI-DSSv4-1.4
- PCI-DSSv4-1.4.5
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_all_send_redirects
- name: Ensure sysctl net.ipv4.conf.all.send_redirects is set to 0
sysctl:
name: net.ipv4.conf.all.send_redirects
value: '0'
sysctl_file: /etc/sysctl.conf
state: present
reload: true
when: '"kernel" in ansible_facts.packages'
tags:
- CJIS-5.10.1.1
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-5
- NIST-800-53-SC-7(a)
- PCI-DSSv4-1.4
- PCI-DSSv4-1.4.5
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_all_send_redirects