Build and Test AIDE Database

このページは日本語には対応しておりません。随時翻訳に取り組んでいます。翻訳に関してご質問やご意見ございましたら、お気軽にご連絡ください。

Description

Run the following command to generate a new database:

$ sudo aideinit

By default, the database will be written to the file

/var/lib/aide/aide.db.new.

Storing the database, the configuration file /etc/aide.conf, and the binary /usr/bin/aide.wrapper (or hashes of these files), in a secure location (such as on read-only media) provides additional assurance about their integrity. The newly-generated database can be installed as follows:

$ sudo cp /var/lib/aide/aide.db.new /var/lib/aide/aide.db

To initiate a manual check, run the following command:

$ sudo /usr/bin/aide.wrapper --check

If this check produces any unexpected output, investigate.

Rationale

For AIDE to be effective, an initial database of “known-good” information about files must be captured and it should be able to be verified against the installed files.

Remediation

Shell script

The following script can be run on the host to remediate the issue.

#!/bin/bash

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "aide"

AIDE_CONFIG=/etc/aide/aide.conf
DEFAULT_DB_PATH=/var/lib/aide/aide.db

# Fix db path in the config file, if necessary
if ! grep -q '^database=file:' ${AIDE_CONFIG}; then
    # replace_or_append gets confused by 'database=file' as a key, so should not be used.
    #replace_or_append "${AIDE_CONFIG}" '^database=file' "${DEFAULT_DB_PATH}" '@CCENUM@' '%s:%s'
    echo "database=file:${DEFAULT_DB_PATH}" >> ${AIDE_CONFIG}
fi

# Fix db out path in the config file, if necessary
if ! grep -q '^database_out=file:' ${AIDE_CONFIG}; then
    echo "database_out=file:${DEFAULT_DB_PATH}.new" >> ${AIDE_CONFIG}
fi

/usr/sbin/aideinit -y -f

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Ansible playbook

The following playbook can be run with Ansible to remediate the issue.

- name: Build and Test AIDE Database - Ensure AIDE Is Installed
  ansible.builtin.apt:
    name: aide
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010450
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Check if DB Path in /etc/aide/aide.conf Is
    Already Set
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    regexp: ^#?(\s*)(database=)(.*)$
    state: absent
  check_mode: true
  changed_when: false
  register: database_replace
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010450
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Check if DB Out Path in /etc/aide/aide.conf
    Is Already Set
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    regexp: ^#?(\s*)(database_out=)(.*)$
    state: absent
  check_mode: true
  changed_when: false
  register: database_out_replace
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010450
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Fix DB Path in Config File if Necessary
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    regexp: ^#?(\s*)(database)(\s*)=(\s*)(.*)$
    line: \2\3=\4file:/var/lib/aide/aide.db
    backrefs: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - database_replace.found > 0
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010450
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Fix DB Out Path in Config File if Necessary
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    regexp: ^#?(\s*)(database_out)(\s*)=(\s*)(.*)$
    line: \2\3=\4file:/var/lib/aide/aide.db.new
    backrefs: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - database_out_replace.found > 0
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010450
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Ensure the Default DB Path is Added
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    line: database=file:/var/lib/aide/aide.db
    create: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - database_replace.found == 0
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010450
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Ensure the Default Out Path is Added
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    line: database_out=file:/var/lib/aide/aide.db.new
    create: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - database_out_replace.found == 0
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010450
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Build and Test AIDE Database
  ansible.builtin.command: /usr/sbin/aideinit -y -f
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010450
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy