このページは日本語には対応しておりません。随時翻訳に取り組んでいます。翻訳に関してご質問やご意見ございましたら、お気軽にご連絡ください。

aws_ecs_task

account_id

Type: STRING

attachments

Type: UNORDERED_LIST_STRUCT
Provider name: attachments
Description: The Elastic Network Adapter that’s associated with the task if the task uses the awsvpc network mode.

  • details
    Type: UNORDERED_LIST_STRUCT
    Provider name: details
    Description: Details of the attachment. For elastic network interfaces, this includes the network interface ID, the MAC address, the subnet ID, and the private IPv4 address. For Service Connect services, this includes portName, clientAliases, discoveryName, and ingressPortOverride. For Elastic Block Storage, this includes roleArn, deleteOnTermination, volumeName, volumeId, and statusReason (only when the attachment fails to create or attach).
    • name
      Type: STRING
      Provider name: name
      Description: The name of the key-value pair. For environment variables, this is the name of the environment variable.
    • value
      Type: STRING
      Provider name: value
      Description: The value of the key-value pair. For environment variables, this is the value of the environment variable.
  • id
    Type: STRING
    Provider name: id
    Description: The unique identifier for the attachment.
  • status
    Type: STRING
    Provider name: status
    Description: The status of the attachment. Valid values are PRECREATED, CREATED, ATTACHING, ATTACHED, DETACHING, DETACHED, DELETED, and FAILED.
  • type
    Type: STRING
    Provider name: type
    Description: The type of the attachment, such as ElasticNetworkInterface, Service Connect, and AmazonElasticBlockStorage.

attributes

Type: UNORDERED_LIST_STRUCT
Provider name: attributes
Description: The attributes of the task

  • name
    Type: STRING
    Provider name: name
    Description: The name of the attribute. The name must contain between 1 and 128 characters. The name may contain letters (uppercase and lowercase), numbers, hyphens (-), underscores (_), forward slashes (/), back slashes (), or periods (.).
  • target_id
    Type: STRING
    Provider name: targetId
    Description: The ID of the target. You can specify the short form ID for a resource or the full Amazon Resource Name (ARN).
  • target_type
    Type: STRING
    Provider name: targetType
    Description: The type of the target to attach the attribute with. This parameter is required if you use the short form ID for a resource instead of the full ARN.
  • value
    Type: STRING
    Provider name: value
    Description: The value of the attribute. The value must contain between 1 and 128 characters. It can contain letters (uppercase and lowercase), numbers, hyphens (-), underscores (_), periods (.), at signs (@), forward slashes (/), back slashes (), colons (:), or spaces. The value can’t start or end with a space.

availability_zone

Type: STRING
Provider name: availabilityZone
Description: The Availability Zone for the task.

capacity_provider_name

Type: STRING
Provider name: capacityProviderName
Description: The capacity provider that’s associated with the task.

cluster_arn

Type: STRING
Provider name: clusterArn
Description: The ARN of the cluster that hosts the task.

connectivity

Type: STRING
Provider name: connectivity
Description: The connectivity status of a task.

connectivity_at

Type: TIMESTAMP
Provider name: connectivityAt
Description: The Unix timestamp for the time when the task last went into CONNECTED status.

container_instance_arn

Type: STRING
Provider name: containerInstanceArn
Description: The ARN of the container instances that host the task.

containers

Type: UNORDERED_LIST_STRUCT
Provider name: containers
Description: The containers that’s associated with the task.

  • container_arn
    Type: STRING
    Provider name: containerArn
    Description: The Amazon Resource Name (ARN) of the container.
  • cpu
    Type: STRING
    Provider name: cpu
    Description: The number of CPU units set for the container. The value is 0 if no value was specified in the container definition when the task definition was registered.
  • exit_code
    Type: INT32
    Provider name: exitCode
    Description: The exit code returned from the container.
  • gpu_ids
    Type: UNORDERED_LIST_STRING
    Provider name: gpuIds
    Description: The IDs of each GPU assigned to the container.
  • health_status
    Type: STRING
    Provider name: healthStatus
    Description: The health status of the container. If health checks aren’t configured for this container in its task definition, then it reports the health status as UNKNOWN.
  • image
    Type: STRING
    Provider name: image
    Description: The image used for the container.
  • image_digest
    Type: STRING
    Provider name: imageDigest
    Description: The container image manifest digest.
  • last_status
    Type: STRING
    Provider name: lastStatus
    Description: The last known status of the container.
  • managed_agents
    Type: UNORDERED_LIST_STRUCT
    Provider name: managedAgents
    Description: The details of any Amazon ECS managed agents associated with the container.
    • last_started_at
      Type: TIMESTAMP
      Provider name: lastStartedAt
      Description: The Unix timestamp for the time when the managed agent was last started.
    • last_status
      Type: STRING
      Provider name: lastStatus
      Description: The last known status of the managed agent.
    • name
      Type: STRING
      Provider name: name
      Description: The name of the managed agent. When the execute command feature is turned on, the managed agent name is ExecuteCommandAgent.
    • reason
      Type: STRING
      Provider name: reason
      Description: The reason for why the managed agent is in the state it is in.
  • memory
    Type: STRING
    Provider name: memory
    Description: The hard limit (in MiB) of memory set for the container.
  • memory_reservation
    Type: STRING
    Provider name: memoryReservation
    Description: The soft limit (in MiB) of memory set for the container.
  • name
    Type: STRING
    Provider name: name
    Description: The name of the container.
  • network_bindings
    Type: UNORDERED_LIST_STRUCT
    Provider name: networkBindings
    Description: The network bindings associated with the container.
    • bind_ip
      Type: STRING
      Provider name: bindIP
      Description: The IP address that the container is bound to on the container instance.
    • container_port
      Type: INT32
      Provider name: containerPort
      Description: The port number on the container that’s used with the network binding.
    • container_port_range
      Type: STRING
      Provider name: containerPortRange
      Description: The port number range on the container that’s bound to the dynamically mapped host port range. The following rules apply when you specify a containerPortRange:
      • You must use either the bridge network mode or the awsvpc network mode.
      • This parameter is available for both the EC2 and Fargate launch types.
      • This parameter is available for both the Linux and Windows operating systems.
      • The container instance must have at least version 1.67.0 of the container agent and at least version 1.67.0-1 of the ecs-init package
      • You can specify a maximum of 100 port ranges per container.
      • You do not specify a hostPortRange. The value of the hostPortRange is set as follows:
        • For containers in a task with the awsvpc network mode, the hostPortRange is set to the same value as the containerPortRange. This is a static mapping strategy.
        • For containers in a task with the bridge network mode, the Amazon ECS agent finds open host ports from the default ephemeral range and passes it to docker to bind them to the container ports.
      • The containerPortRange valid values are between 1 and 65535.
      • A port can only be included in one port mapping per container.
      • You cannot specify overlapping port ranges.
      • The first port in the range must be less than last port in the range.
      • Docker recommends that you turn off the docker-proxy in the Docker daemon config file when you have a large number of ports. For more information, see Issue #11185 on the Github website. For information about how to turn off the docker-proxy in the Docker daemon config file, see Docker daemon in the Amazon ECS Developer Guide.
      You can call DescribeTasks to view the hostPortRange which are the host ports that are bound to the container ports.
    • host_port
      Type: INT32
      Provider name: hostPort
      Description: The port number on the host that’s used with the network binding.
    • host_port_range
      Type: STRING
      Provider name: hostPortRange
      Description: The port number range on the host that’s used with the network binding. This is assigned is assigned by Docker and delivered by the Amazon ECS agent.
    • protocol
      Type: STRING
      Provider name: protocol
      Description: The protocol used for the network binding.
  • network_interfaces
    Type: UNORDERED_LIST_STRUCT
    Provider name: networkInterfaces
    Description: The network interfaces associated with the container.
    • attachment_id
      Type: STRING
      Provider name: attachmentId
      Description: The attachment ID for the network interface.
    • ipv6_address
      Type: STRING
      Provider name: ipv6Address
      Description: The private IPv6 address for the network interface.
    • private_ipv4_address
      Type: STRING
      Provider name: privateIpv4Address
      Description: The private IPv4 address for the network interface.
  • reason
    Type: STRING
    Provider name: reason
    Description: A short (255 max characters) human-readable string to provide additional details about a running or stopped container.
  • runtime_id
    Type: STRING
    Provider name: runtimeId
    Description: The ID of the Docker container.
  • task_arn
    Type: STRING
    Provider name: taskArn
    Description: The ARN of the task.

cpu

Type: STRING
Provider name: cpu
Description: The number of CPU units used by the task as expressed in a task definition. It can be expressed as an integer using CPU units (for example, 1024). It can also be expressed as a string using vCPUs (for example, 1 vCPU or 1 vcpu). String values are converted to an integer that indicates the CPU units when the task definition is registered. If you use the EC2 launch type, this field is optional. Supported values are between 128 CPU units (0.125 vCPUs) and 10240 CPU units (10 vCPUs). If you use the Fargate launch type, this field is required. You must use one of the following values. These values determine the range of supported values for the memory parameter: The CPU units cannot be less than 1 vCPU when you use Windows containers on Fargate.

  • 256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)
  • 512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)
  • 1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
  • 2048 (2 vCPU) - Available memory values: 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)
  • 4096 (4 vCPU) - Available memory values: 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)
  • 8192 (8 vCPU) - Available memory values: 16 GB and 60 GB in 4 GB increments This option requires Linux platform 1.4.0 or later.
  • 16384 (16vCPU) - Available memory values: 32GB and 120 GB in 8 GB increments This option requires Linux platform 1.4.0 or later.

created_at

Type: TIMESTAMP
Provider name: createdAt
Description: The Unix timestamp for the time when the task was created. More specifically, it’s for the time when the task entered the PENDING state.

desired_status

Type: STRING
Provider name: desiredStatus
Description: The desired status of the task. For more information, see Task Lifecycle.

enable_execute_command

Type: BOOLEAN
Provider name: enableExecuteCommand
Description: Determines whether execute command functionality is turned on for this task. If true, execute command functionality is turned on all the containers in the task.

ephemeral_storage

Type: STRUCT
Provider name: ephemeralStorage
Description: The ephemeral storage settings for the task.

  • size_in_gib
    Type: INT32
    Provider name: sizeInGiB
    Description: The total amount, in GiB, of ephemeral storage to set for the task. The minimum supported value is 20 GiB and the maximum supported value is 200 GiB.

execution_stopped_at

Type: TIMESTAMP
Provider name: executionStoppedAt
Description: The Unix timestamp for the time when the task execution stopped.

fargate_ephemeral_storage

Type: STRUCT
Provider name: fargateEphemeralStorage
Description: The Fargate ephemeral storage settings for the task.

  • kms_key_id
    Type: STRING
    Provider name: kmsKeyId
    Description: Specify an Key Management Service key ID to encrypt the ephemeral storage for the task.
  • size_in_gib
    Type: INT32
    Provider name: sizeInGiB
    Description: The total amount, in GiB, of the ephemeral storage to set for the task. The minimum supported value is 20 GiB and the maximum supported value is 200 GiB.

group

Type: STRING
Provider name: group
Description: The name of the task group that’s associated with the task.

health_status

Type: STRING
Provider name: healthStatus
Description: The health status for the task. It’s determined by the health of the essential containers in the task. If all essential containers in the task are reporting as HEALTHY, the task status also reports as HEALTHY. If any essential containers in the task are reporting as UNHEALTHY or UNKNOWN, the task status also reports as UNHEALTHY or UNKNOWN. The Amazon ECS container agent doesn’t monitor or report on Docker health checks that are embedded in a container image and not specified in the container definition. For example, this includes those specified in a parent image or from the image’s Dockerfile. Health check parameters that are specified in a container definition override any Docker health checks that are found in the container image.

inference_accelerators

Type: UNORDERED_LIST_STRUCT
Provider name: inferenceAccelerators
Description: The Elastic Inference accelerator that’s associated with the task.

  • device_name
    Type: STRING
    Provider name: deviceName
    Description: The Elastic Inference accelerator device name. The deviceName must also be referenced in a container definition as a ResourceRequirement.
  • device_type
    Type: STRING
    Provider name: deviceType
    Description: The Elastic Inference accelerator type to use.

last_status

Type: STRING
Provider name: lastStatus
Description: The last known status for the task. For more information, see Task Lifecycle.

launch_type

Type: STRING
Provider name: launchType
Description: The infrastructure where your task runs on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

memory

Type: STRING
Provider name: memory
Description: The amount of memory (in MiB) that the task uses as expressed in a task definition. It can be expressed as an integer using MiB (for example, 1024). If it’s expressed as a string using GB (for example, 1GB or 1 GB), it’s converted to an integer indicating the MiB when the task definition is registered. If you use the EC2 launch type, this field is optional. If you use the Fargate launch type, this field is required. You must use one of the following values. The value that you choose determines the range of supported values for the cpu parameter.

  • 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU)
  • 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU)
  • 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
  • Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU)
  • Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU)
  • Between 16 GB and 60 GB in 4 GB increments - Available cpu values: 8192 (8 vCPU) This option requires Linux platform 1.4.0 or later.
  • Between 32GB and 120 GB in 8 GB increments - Available cpu values: 16384 (16 vCPU) This option requires Linux platform 1.4.0 or later.

overrides

Type: STRUCT
Provider name: overrides
Description: One or more container overrides.

  • container_overrides
    Type: UNORDERED_LIST_STRUCT
    Provider name: containerOverrides
    Description: One or more container overrides that are sent to a task.
    • command
      Type: UNORDERED_LIST_STRING
      Provider name: command
      Description: The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
    • cpu
      Type: INT32
      Provider name: cpu
      Description: The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.
    • environment
      Type: UNORDERED_LIST_STRUCT
      Provider name: environment
      Description: The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.
      • name
        Type: STRING
        Provider name: name
        Description: The name of the key-value pair. For environment variables, this is the name of the environment variable.
      • value
        Type: STRING
        Provider name: value
        Description: The value of the key-value pair. For environment variables, this is the value of the environment variable.
    • environment_files
      Type: UNORDERED_LIST_STRUCT
      Provider name: environmentFiles
      Description: A list of files containing the environment variables to pass to a container, instead of the value from the container definition.
      • type
        Type: STRING
        Provider name: type
        Description: The file type to use. Environment files are objects in Amazon S3. The only supported value is s3.
      • value
        Type: STRING
        Provider name: value
        Description: The Amazon Resource Name (ARN) of the Amazon S3 object containing the environment variable file.
    • memory
      Type: INT32
      Provider name: memory
      Description: The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
    • memory_reservation
      Type: INT32
      Provider name: memoryReservation
      Description: The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.
    • name
      Type: STRING
      Provider name: name
      Description: The name of the container that receives the override. This parameter is required if any override is specified.
    • resource_requirements
      Type: UNORDERED_LIST_STRUCT
      Provider name: resourceRequirements
      Description: The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.
      • type
        Type: STRING
        Provider name: type
        Description: The type of resource to assign to a container.
      • value
        Type: STRING
        Provider name: value
        Description: The value for the specified resource type. When the type is GPU, the value is the number of physical GPUs the Amazon ECS container agent reserves for the container. The number of GPUs that’s reserved for all containers in a task can’t exceed the number of available GPUs on the container instance that the task is launched on. When the type is InferenceAccelerator, the value matches the deviceName for an InferenceAccelerator specified in a task definition.
  • cpu
    Type: STRING
    Provider name: cpu
    Description: The CPU override for the task.
  • ephemeral_storage
    Type: STRUCT
    Provider name: ephemeralStorage
    Description: The ephemeral storage setting override for the task. This parameter is only supported for tasks hosted on Fargate that use the following platform versions:
    • Linux platform version 1.4.0 or later.
    • Windows platform version 1.0.0 or later.

    • size_in_gib
      Type: INT32
      Provider name: sizeInGiB
      Description: The total amount, in GiB, of ephemeral storage to set for the task. The minimum supported value is 20 GiB and the maximum supported value is 200 GiB.
  • execution_role_arn
    Type: STRING
    Provider name: executionRoleArn
    Description: The Amazon Resource Name (ARN) of the task execution role override for the task. For more information, see Amazon ECS task execution IAM role in the Amazon Elastic Container Service Developer Guide.
  • inference_accelerator_overrides
    Type: UNORDERED_LIST_STRUCT
    Provider name: inferenceAcceleratorOverrides
    Description: The Elastic Inference accelerator override for the task.
    • device_name
      Type: STRING
      Provider name: deviceName
      Description: The Elastic Inference accelerator device name to override for the task. This parameter must match a deviceName specified in the task definition.
    • device_type
      Type: STRING
      Provider name: deviceType
      Description: The Elastic Inference accelerator type to use.
  • memory
    Type: STRING
    Provider name: memory
    Description: The memory override for the task.
  • task_role_arn
    Type: STRING
    Provider name: taskRoleArn
    Description: The Amazon Resource Name (ARN) of the role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role. For more information, see IAM Role for Tasks in the Amazon Elastic Container Service Developer Guide.

platform_family

Type: STRING
Provider name: platformFamily
Description: The operating system that your tasks are running on. A platform family is specified only for tasks that use the Fargate launch type. All tasks that run as part of this service must use the same platformFamily value as the service (for example, LINUX.).

platform_version

Type: STRING
Provider name: platformVersion
Description: The platform version where your task runs on. A platform version is only specified for tasks that use the Fargate launch type. If you didn’t specify one, the LATEST platform version is used. For more information, see Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.

pull_started_at

Type: TIMESTAMP
Provider name: pullStartedAt
Description: The Unix timestamp for the time when the container image pull began.

pull_stopped_at

Type: TIMESTAMP
Provider name: pullStoppedAt
Description: The Unix timestamp for the time when the container image pull completed.

started_at

Type: TIMESTAMP
Provider name: startedAt
Description: The Unix timestamp for the time when the task started. More specifically, it’s for the time when the task transitioned from the PENDING state to the RUNNING state.

started_by

Type: STRING
Provider name: startedBy
Description: The tag specified when a task is started. If an Amazon ECS service started the task, the startedBy parameter contains the deployment ID of that service.

stop_code

Type: STRING
Provider name: stopCode
Description: The stop code indicating why a task was stopped. The stoppedReason might contain additional details. For more information about stop code, see Stopped tasks error codes in the Amazon ECS Developer Guide.

stopped_at

Type: TIMESTAMP
Provider name: stoppedAt
Description: The Unix timestamp for the time when the task was stopped. More specifically, it’s for the time when the task transitioned from the RUNNING state to the STOPPED state.

stopped_reason

Type: STRING
Provider name: stoppedReason
Description: The reason that the task was stopped.

stopping_at

Type: TIMESTAMP
Provider name: stoppingAt
Description: The Unix timestamp for the time when the task stops. More specifically, it’s for the time when the task transitions from the RUNNING state to STOPPING.

tags

Type: UNORDERED_LIST_STRING

task_arn

Type: STRING
Provider name: taskArn
Description: The Amazon Resource Name (ARN) of the task.

task_definition_arn

Type: STRING
Provider name: taskDefinitionArn
Description: The ARN of the task definition that creates the task.

version

Type: INT64
Provider name: version
Description: The version counter for the task. Every time a task experiences a change that starts a CloudWatch event, the version counter is incremented. If you replicate your Amazon ECS task state with CloudWatch Events, you can compare the version of a task reported by the Amazon ECS API actions with the version reported in CloudWatch Events for the task (inside the detail object) to verify that the version in your event stream is current.