kubevirt_handler.can_connect
(gauge) | Value of 1 if the agent can connect to the KubeVirt Handler, and 0 otherwise. |
kubevirt_handler.vmi.cpu_system_usage_seconds.count
(count) | Total CPU time spent in system mode.
Shown as second |
kubevirt_handler.vmi.cpu_usage_seconds.count
(count) | Total CPU time spent in all modes (sum of both vcpu and hypervisor usage).
Shown as second |
kubevirt_handler.vmi.cpu_user_usage_seconds.count
(count) | Total CPU time spent in user mode.
Shown as second |
kubevirt_handler.vmi.memory_actual_balloon_bytes
(gauge) | Current balloon size in bytes.
Shown as byte |
kubevirt_handler.vmi.memory_available_bytes
(gauge) | Amount of usable memory as seen by the domain.
Shown as byte |
kubevirt_handler.vmi.memory_domain_bytes
(gauge) | The amount of memory in bytes allocated to the domain.
Shown as byte |
kubevirt_handler.vmi.memory_pgmajfault.count
(count) | The number of page faults when disk IO was required.
Shown as page |
kubevirt_handler.vmi.memory_pgminfault.count
(count) | The number of other page faults, when disk IO was not required.
Shown as page |
kubevirt_handler.vmi.memory_resident_bytes
(gauge) | Resident set size of the process running the domain.
Shown as byte |
kubevirt_handler.vmi.memory_swap_in_traffic_bytes
(gauge) | The total amount of data read from swap space of the guest in bytes.
Shown as byte |
kubevirt_handler.vmi.memory_swap_out_traffic_bytes
(gauge) | The total amount of memory written out to swap space of the guest in bytes.
Shown as byte |
kubevirt_handler.vmi.memory_unused_bytes
(gauge) | The amount of memory left completely unused by the system.
Shown as byte |
kubevirt_handler.vmi.memory_usable_bytes
(gauge) | The amount of memory which can be reclaimed by balloon without pushing the guest system to swap, corresponds to 'Available' in /proc/meminfo
Shown as byte |
kubevirt_handler.vmi.network_receive_bytes.count
(count) | Total network traffic received in bytes.
Shown as byte |
kubevirt_handler.vmi.network_receive_errors.count
(count) | Total network received error packets.
Shown as packet |
kubevirt_handler.vmi.network_receive_packets.count
(count) | Total network traffic received packets.
Shown as packet |
kubevirt_handler.vmi.network_receive_packets_dropped.count
(count) | The total number of rx packets dropped on vNIC interfaces.
Shown as packet |
kubevirt_handler.vmi.network_transmit_bytes.count
(count) | Total network traffic transmitted in bytes.
Shown as byte |
kubevirt_handler.vmi.network_transmit_errors.count
(count) | Total network transmitted error packets.
Shown as packet |
kubevirt_handler.vmi.network_transmit_packets.count
(count) | Total network traffic transmitted packets.
Shown as packet |
kubevirt_handler.vmi.network_transmit_packets_dropped.count
(count) | The total number of tx packets dropped on vNIC interfaces.
Shown as packet |
kubevirt_handler.vmi.node_cpu_affinity
(gauge) | Number of VMI CPU affinities to node physical cores. |
kubevirt_handler.vmi.storage_flush_requests.count
(count) | Total storage flush requests.
Shown as request |
kubevirt_handler.vmi.storage_flush_times_seconds.count
(count) | Total time spent on cache flushing.
Shown as second |
kubevirt_handler.vmi.storage_iops_read.count
(count) | Total number of I/O read operations.
Shown as read |
kubevirt_handler.vmi.storage_iops_write.count
(count) | Total number of I/O write operations.
Shown as write |
kubevirt_handler.vmi.storage_read_times_seconds.count
(count) | Total time spent on read operations.
Shown as second |
kubevirt_handler.vmi.storage_read_traffic_bytes.count
(count) | Total number of bytes read from storage.
Shown as byte |
kubevirt_handler.vmi.storage_write_times_seconds.count
(count) | Total time spent on write operations.
Shown as second |
kubevirt_handler.vmi.storage_write_traffic_bytes.count
(count) | Total number of written bytes.
Shown as byte |
kubevirt_handler.vmi.vcpu_delay_seconds.count
(count) | Amount of time spent by each vcpu waiting in the queue instead of running.
Shown as second |
kubevirt_handler.vmi.vcpu_seconds.count
(count) | Total amount of time spent in each state by each vcpu (cpu_time excluding hypervisor time). Where id is the vcpu identifier and state can be one of the following: [OFFLINE, RUNNING, BLOCKED].
Shown as second |
kubevirt_handler.vmi.vcpu_wait_seconds.count
(count) | Amount of time spent by each vcpu while waiting on I/O.
Shown as second |
kubevirt_handler.workqueue.adds.count
(count) | Total number of adds handled by workqueue
Shown as item |
kubevirt_handler.workqueue.depth
(gauge) | Current depth of workqueue
Shown as item |
kubevirt_handler.workqueue.longest_running_processor_seconds
(gauge) | How many seconds has the longest running processor for workqueue been running.
Shown as second |
kubevirt_handler.workqueue.queue_duration_seconds.bucket
(count) | How long an item stays in workqueue before being requested.
Shown as second |
kubevirt_handler.workqueue.queue_duration_seconds.count
(count) | How long an item stays in workqueue before being requested.
Shown as second |
kubevirt_handler.workqueue.queue_duration_seconds.sum
(count) | How long an item stays in workqueue before being requested.
Shown as second |
kubevirt_handler.workqueue.retries.count
(count) | Total number of retries handled by workqueue |
kubevirt_handler.workqueue.unfinished_work_seconds
(gauge) | How many seconds of work has done that is in progress and hasn't been observed by work_duration. Large values indicate stuck threads. One can deduce the number of stuck threads by observing the rate at which this increases.
Shown as second |
kubevirt_handler.workqueue.work_duration_seconds.bucket
(count) | How long in seconds processing an item from workqueue takes.
Shown as second |
kubevirt_handler.workqueue.work_duration_seconds.count
(count) | How long in seconds processing an item from workqueue takes.
Shown as second |
kubevirt_handler.workqueue.work_duration_seconds.sum
(count) | How long in seconds processing an item from workqueue takes.
Shown as second |
