---
title: Getting Started with Datadog
description: Datadog, the leading service for cloud-scale monitoring.
breadcrumbs: Docs > Infrastructure > Datadog Resource Catalog
---

# aws_waf_acl{% #aws_waf_acl %}

## `account_id`{% #account_id %}

**Type**: `STRING`

## `default_action`{% #default_action %}

**Type**: `STRUCT`**Provider name**: `DefaultAction`**Description**: The action to perform if none of the `Rules` contained in the `WebACL` match. The action is specified by the WafAction object.

- `type`**Type**: `STRING`**Provider name**: `Type`**Description**: Specifies how you want AWS WAF to respond to requests that match the settings in a `Rule`. Valid settings include the following:
  - `ALLOW`: AWS WAF allows requests
  - `BLOCK`: AWS WAF blocks requests
  - `COUNT`: AWS WAF increments a counter of the requests that match all of the conditions in the rule. AWS WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can't specify `COUNT` for the default action for a `WebACL`.

## `metric_name`{% #metric_name %}

**Type**: `STRING`**Provider name**: `MetricName`**Description**: A friendly name or description for the metrics for this `WebACL`. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change `MetricName` after you create the `WebACL`.

## `name`{% #name %}

**Type**: `STRING`**Provider name**: `Name`**Description**: A friendly name or description of the `WebACL`. You can't change the name of a `WebACL` after you create it.

## `rules`{% #rules %}

**Type**: `UNORDERED_LIST_STRUCT`**Provider name**: `Rules`**Description**: An array that contains the action for each `Rule` in a `WebACL`, the priority of the `Rule`, and the ID of the `Rule`.

- `action`**Type**: `STRUCT`**Provider name**: `Action`**Description**: Specifies the action that CloudFront or AWS WAF takes when a web request matches the conditions in the `Rule`. Valid values for `Action` include the following:
  - `ALLOW`: CloudFront responds with the requested object.
  - `BLOCK`: CloudFront responds with an HTTP 403 (Forbidden) status code.
  - `COUNT`: AWS WAF increments a counter of requests that match the conditions in the rule and then continues to inspect the web request based on the remaining rules in the web ACL.
`ActivatedRule|OverrideAction` applies only when updating or adding a `RuleGroup` to a `WebACL`. In this case, you do not use `ActivatedRule|Action`. For all other update requests, `ActivatedRule|Action` is used instead of `ActivatedRule|OverrideAction`.
  - `type`**Type**: `STRING`**Provider name**: `Type`**Description**: Specifies how you want AWS WAF to respond to requests that match the settings in a `Rule`. Valid settings include the following:
    - `ALLOW`: AWS WAF allows requests
    - `BLOCK`: AWS WAF blocks requests
    - `COUNT`: AWS WAF increments a counter of the requests that match all of the conditions in the rule. AWS WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can't specify `COUNT` for the default action for a `WebACL`.
- `excluded_rules`**Type**: `UNORDERED_LIST_STRUCT`**Provider name**: `ExcludedRules`**Description**: An array of rules to exclude from a rule group. This is applicable only when the `ActivatedRule` refers to a `RuleGroup`. Sometimes it is necessary to troubleshoot rule groups that are blocking traffic unexpectedly (false positives). One troubleshooting technique is to identify the specific rule within the rule group that is blocking the legitimate traffic and then disable (exclude) that particular rule. You can exclude rules from both your own rule groups and AWS Marketplace rule groups that have been associated with a web ACL. Specifying `ExcludedRules` does not remove those rules from the rule group. Rather, it changes the action for the rules to `COUNT`. Therefore, requests that match an `ExcludedRule` are counted but not blocked. The `RuleGroup` owner will receive COUNT metrics for each `ExcludedRule`. If you want to exclude rules from a rule group that is already associated with a web ACL, perform the following steps:
  1. Use the AWS WAF logs to identify the IDs of the rules that you want to exclude. For more information about the logs, see [Logging Web ACL Traffic Information](https://docs.aws.amazon.com/waf/latest/developerguide/logging.html).
  1. Submit an UpdateWebACL request that has two actions:
     - The first action deletes the existing rule group from the web ACL. That is, in the UpdateWebACL request, the first `Updates:Action` should be `DELETE` and `Updates:ActivatedRule:RuleId` should be the rule group that contains the rules that you want to exclude.
     - The second action inserts the same rule group back in, but specifying the rules to exclude. That is, the second `Updates:Action` should be `INSERT`, `Updates:ActivatedRule:RuleId` should be the rule group that you just removed, and `ExcludedRules` should contain the rules that you want to exclude.

  - `rule_id`**Type**: `STRING`**Provider name**: `RuleId`**Description**: The unique identifier for the rule to exclude from the rule group.
- `override_action`**Type**: `STRUCT`**Provider name**: `OverrideAction`**Description**: Use the `OverrideAction` to test your `RuleGroup`. Any rule in a `RuleGroup` can potentially block a request. If you set the `OverrideAction` to `None`, the `RuleGroup` will block a request if any individual rule in the `RuleGroup` matches the request and is configured to block that request. However if you first want to test the `RuleGroup`, set the `OverrideAction` to `Count`. The `RuleGroup` will then override any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests will be counted. You can view a record of counted requests using GetSampledRequests. `ActivatedRule|OverrideAction` applies only when updating or adding a `RuleGroup` to a `WebACL`. In this case you do not use `ActivatedRule|Action`. For all other update requests, `ActivatedRule|Action` is used instead of `ActivatedRule|OverrideAction`.
  - `type`**Type**: `STRING`**Provider name**: `Type`**Description**: `COUNT` overrides the action specified by the individual rule within a `RuleGroup` . If set to `NONE`, the rule's action will take place.
- `priority`**Type**: `INT32`**Provider name**: `Priority`**Description**: Specifies the order in which the `Rules` in a `WebACL` are evaluated. Rules with a lower value for `Priority` are evaluated before `Rules` with a higher value. The value must be a unique integer. If you add multiple `Rules` to a `WebACL`, the values don't need to be consecutive.
- `rule_id`**Type**: `STRING`**Provider name**: `RuleId`**Description**: The `RuleId` for a `Rule`. You use `RuleId` to get more information about a `Rule` (see GetRule), update a `Rule` (see UpdateRule), insert a `Rule` into a `WebACL` or delete a one from a `WebACL` (see UpdateWebACL), or delete a `Rule` from AWS WAF (see DeleteRule). `RuleId` is returned by CreateRule and by ListRules.
- `type`**Type**: `STRING`**Provider name**: `Type`**Description**: The rule type, either `REGULAR`, as defined by Rule, `RATE_BASED`, as defined by RateBasedRule, or `GROUP`, as defined by RuleGroup. The default is REGULAR. Although this field is optional, be aware that if you try to add a RATE_BASED rule to a web ACL without setting the type, the UpdateWebACL request will fail because the request tries to add a REGULAR rule with the specified ID, which does not exist.

## `tags`{% #tags %}

**Type**: `UNORDERED_LIST_STRING`

## `web_acl_arn`{% #web_acl_arn %}

**Type**: `STRING`**Provider name**: `WebACLArn`**Description**: Tha Amazon Resource Name (ARN) of the web ACL.

## `web_acl_id`{% #web_acl_id %}

**Type**: `STRING`**Provider name**: `WebACLId`**Description**: A unique identifier for a `WebACL`. You use `WebACLId` to get information about a `WebACL` (see GetWebACL), update a `WebACL` (see UpdateWebACL), and delete a `WebACL` from AWS WAF (see DeleteWebACL). `WebACLId` is returned by CreateWebACL and by ListWebACLs.