This product is not supported for your selected Datadog site. ().

aws_sagemaker_optimizationjob

account_id

Type: STRING

creation_time

Type: TIMESTAMP
Provider name: CreationTime
Description: The time when you created the optimization job.

deployment_instance_type

Type: STRING
Provider name: DeploymentInstanceType
Description: The type of instance that hosts the optimized model that you create with the optimization job.

failure_reason

Type: STRING
Provider name: FailureReason
Description: If the optimization job status is FAILED, the reason for the failure.

last_modified_time

Type: TIMESTAMP
Provider name: LastModifiedTime
Description: The time when the optimization job was last updated.

model_source

Type: STRUCT
Provider name: ModelSource
Description: The location of the source model to optimize with an optimization job.

  • s3
    Type: STRUCT
    Provider name: S3
    Description: The Amazon S3 location of a source model to optimize with an optimization job.
    • model_access_config
      Type: STRUCT
      Provider name: ModelAccessConfig
      Description: The access configuration settings for the source ML model for an optimization job, where you can accept the model end-user license agreement (EULA).
      • accept_eula
        Type: BOOLEAN
        Provider name: AcceptEula
        Description: Specifies agreement to the model end-user license agreement (EULA). The AcceptEula value must be explicitly defined as True in order to accept the EULA that this model requires. You are responsible for reviewing and complying with any applicable license terms and making sure they are acceptable for your use case before downloading or using a model.
    • s3_uri
      Type: STRING
      Provider name: S3Uri
      Description: An Amazon S3 URI that locates a source model to optimize with an optimization job.

optimization_configs

Type: UNORDERED_LIST_STRUCT
Provider name: OptimizationConfigs
Description: Settings for each of the optimization techniques that the job applies.

  • model_compilation_config
    Type: STRUCT
    Provider name: ModelCompilationConfig
    Description: Settings for the model compilation technique that’s applied by a model optimization job.
    • image
      Type: STRING
      Provider name: Image
      Description: The URI of an LMI DLC in Amazon ECR. SageMaker uses this image to run the optimization.
    • override_environment
      Type: MAP_STRING_STRING
      Provider name: OverrideEnvironment
      Description: Environment variables that override the default ones in the model container.
  • model_quantization_config
    Type: STRUCT
    Provider name: ModelQuantizationConfig
    Description: Settings for the model quantization technique that’s applied by a model optimization job.
    • image
      Type: STRING
      Provider name: Image
      Description: The URI of an LMI DLC in Amazon ECR. SageMaker uses this image to run the optimization.
    • override_environment
      Type: MAP_STRING_STRING
      Provider name: OverrideEnvironment
      Description: Environment variables that override the default ones in the model container.
  • model_sharding_config
    Type: STRUCT
    Provider name: ModelShardingConfig
    Description: Settings for the model sharding technique that’s applied by a model optimization job.
    • image
      Type: STRING
      Provider name: Image
      Description: The URI of an LMI DLC in Amazon ECR. SageMaker uses this image to run the optimization.
    • override_environment
      Type: MAP_STRING_STRING
      Provider name: OverrideEnvironment
      Description: Environment variables that override the default ones in the model container.

optimization_end_time

Type: TIMESTAMP
Provider name: OptimizationEndTime
Description: The time when the optimization job finished processing.

optimization_environment

Type: MAP_STRING_STRING
Provider name: OptimizationEnvironment
Description: The environment variables to set in the model container.

optimization_job_arn

Type: STRING
Provider name: OptimizationJobArn
Description: The Amazon Resource Name (ARN) of the optimization job.

optimization_job_name

Type: STRING
Provider name: OptimizationJobName
Description: The name that you assigned to the optimization job.

optimization_job_status

Type: STRING
Provider name: OptimizationJobStatus
Description: The current status of the optimization job.

optimization_output

Type: STRUCT
Provider name: OptimizationOutput
Description: Output values produced by an optimization job.

  • recommended_inference_image
    Type: STRING
    Provider name: RecommendedInferenceImage
    Description: The image that SageMaker recommends that you use to host the optimized model that you created with an optimization job.

optimization_start_time

Type: TIMESTAMP
Provider name: OptimizationStartTime
Description: The time when the optimization job started.

output_config

Type: STRUCT
Provider name: OutputConfig
Description: Details for where to store the optimized model that you create with the optimization job.

  • kms_key_id
    Type: STRING
    Provider name: KmsKeyId
    Description: The Amazon Resource Name (ARN) of a key in Amazon Web Services KMS. SageMaker uses they key to encrypt the artifacts of the optimized model when SageMaker uploads the model to Amazon S3.
  • s3_output_location
    Type: STRING
    Provider name: S3OutputLocation
    Description: The Amazon S3 URI for where to store the optimized model that you create with an optimization job.

role_arn

Type: STRING
Provider name: RoleArn
Description: The ARN of the IAM role that you assigned to the optimization job.

stopping_condition

Type: STRUCT
Provider name: StoppingCondition

  • max_pending_time_in_seconds
    Type: INT32
    Provider name: MaxPendingTimeInSeconds
    Description: The maximum length of time, in seconds, that a training or compilation job can be pending before it is stopped. When working with training jobs that use capacity from training plans, not all Pending job states count against the MaxPendingTimeInSeconds limit. The following scenarios do not increment the MaxPendingTimeInSeconds counter:
    • The plan is in a Scheduled state: Jobs queued (in Pending status) before a plan’s start date (waiting for scheduled start time)
    • Between capacity reservations: Jobs temporarily back to Pending status between two capacity reservation periods
    MaxPendingTimeInSeconds only increments when jobs are actively waiting for capacity in an Active plan.
  • max_runtime_in_seconds
    Type: INT32
    Provider name: MaxRuntimeInSeconds
    Description: The maximum length of time, in seconds, that a training or compilation job can run before it is stopped. For compilation jobs, if the job does not complete during this time, a TimeOut error is generated. We recommend starting with 900 seconds and increasing as necessary based on your model. For all other jobs, if the job does not complete during this time, SageMaker ends the job. When RetryStrategy is specified in the job request, MaxRuntimeInSeconds specifies the maximum time for all of the attempts in total, not each individual attempt. The default value is 1 day. The maximum value is 28 days. The maximum time that a TrainingJob can run in total, including any time spent publishing metrics or archiving and uploading models after it has been stopped, is 30 days.
  • max_wait_time_in_seconds
    Type: INT32
    Provider name: MaxWaitTimeInSeconds
    Description: The maximum length of time, in seconds, that a managed Spot training job has to complete. It is the amount of time spent waiting for Spot capacity plus the amount of time the job can run. It must be equal to or greater than MaxRuntimeInSeconds. If the job does not complete during this time, SageMaker ends the job. When RetryStrategy is specified in the job request, MaxWaitTimeInSeconds specifies the maximum time for all of the attempts in total, not each individual attempt.

tags

Type: UNORDERED_LIST_STRING

vpc_config

Type: STRUCT
Provider name: VpcConfig
Description: A VPC in Amazon VPC that your optimized model has access to.

  • security_group_ids
    Type: UNORDERED_LIST_STRING
    Provider name: SecurityGroupIds
    Description: The VPC security group IDs, in the form sg-xxxxxxxx. Specify the security groups for the VPC that is specified in the Subnets field.
  • subnets
    Type: UNORDERED_LIST_STRING
    Provider name: Subnets
    Description: The ID of the subnets in the VPC to which you want to connect your optimized model.