---
title: Getting Started with Datadog
description: Datadog, the leading service for cloud-scale monitoring.
breadcrumbs: Docs > Infrastructure > Datadog Resource Catalog
---

# aws_ec2_spot_instance_request{% #aws_ec2_spot_instance_request %}

## `account_id`{% #account_id %}

**Type**: `STRING`

## `actual_block_hourly_price`{% #actual_block_hourly_price %}

**Type**: `STRING`**Provider name**: `ActualBlockHourlyPrice`**Description**: Deprecated.

## `availability_zone_group`{% #availability_zone_group %}

**Type**: `STRING`**Provider name**: `AvailabilityZoneGroup`**Description**: The Availability Zone group. If you specify the same Availability Zone group for all Spot Instance requests, all Spot Instances are launched in the same Availability Zone.

## `block_duration_minutes`{% #block_duration_minutes %}

**Type**: `INT32`**Provider name**: `BlockDurationMinutes`**Description**: Deprecated.

## `create_time`{% #create_time %}

**Type**: `TIMESTAMP`**Provider name**: `CreateTime`**Description**: The date and time when the Spot Instance request was created, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).

## `fault`{% #fault %}

**Type**: `STRUCT`**Provider name**: `Fault`**Description**: The fault codes for the Spot Instance request, if any.

- `code`**Type**: `STRING`**Provider name**: `Code`**Description**: The reason code for the Spot Instance state change.
- `message`**Type**: `STRING`**Provider name**: `Message`**Description**: The message for the Spot Instance state change.

## `instance_id`{% #instance_id %}

**Type**: `STRING`**Provider name**: `InstanceId`**Description**: The instance ID, if an instance has been launched to fulfill the Spot Instance request.

## `instance_interruption_behavior`{% #instance_interruption_behavior %}

**Type**: `STRING`**Provider name**: `InstanceInterruptionBehavior`**Description**: The behavior when a Spot Instance is interrupted.

## `launch_group`{% #launch_group %}

**Type**: `STRING`**Provider name**: `LaunchGroup`**Description**: The instance launch group. Launch groups are Spot Instances that launch together and terminate together.

## `launch_specification`{% #launch_specification %}

**Type**: `STRUCT`**Provider name**: `LaunchSpecification`**Description**: Additional information for launching instances.

- `addressing_type`**Type**: `STRING`**Provider name**: `AddressingType`**Description**: Deprecated.
- `block_device_mappings`**Type**: `UNORDERED_LIST_STRUCT`**Provider name**: `BlockDeviceMappings`**Description**: The block device mapping entries.
  - `device_name`**Type**: `STRING`**Provider name**: `DeviceName`**Description**: The device name (for example, `/dev/sdh` or `xvdh`).
  - `ebs`**Type**: `STRUCT`**Provider name**: `Ebs`**Description**: Parameters used to automatically set up EBS volumes when the instance is launched.
    - `delete_on_termination`**Type**: `BOOLEAN`**Provider name**: `DeleteOnTermination`**Description**: Indicates whether the EBS volume is deleted on instance termination. For more information, see [Preserving Amazon EBS volumes on instance termination](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/terminating-instances.html#preserving-volumes-on-termination) in the Amazon EC2 User Guide.
    - `encrypted`**Type**: `BOOLEAN`**Provider name**: `Encrypted`**Description**: Indicates whether the encryption state of an EBS volume is changed while being restored from a backing snapshot. The effect of setting the encryption state to `true` depends on the volume origin (new or from a snapshot), starting encryption state, ownership, and whether encryption by default is enabled. For more information, see [Amazon EBS encryption](https://docs.aws.amazon.com/ebs/latest/userguide/ebs-encryption.html#encryption-parameters) in the Amazon EBS User Guide. In no case can you remove encryption from an encrypted volume. Encrypted volumes can only be attached to instances that support Amazon EBS encryption. For more information, see [Supported instance types](https://docs.aws.amazon.com/ebs/latest/userguide/ebs-encryption-requirements.html#ebs-encryption_supported_instances). This parameter is not returned by DescribeImageAttribute. For CreateImage and RegisterImage, whether you can include this parameter, and the allowed values differ depending on the type of block device mapping you are creating.
      - If you are creating a block device mapping for a new (empty) volume, you can include this parameter, and specify either `true` for an encrypted volume, or `false` for an unencrypted volume. If you omit this parameter, it defaults to `false` (unencrypted).
      - If you are creating a block device mapping from an existing encrypted or unencrypted snapshot, you must omit this parameter. If you include this parameter, the request will fail, regardless of the value that you specify.
      - If you are creating a block device mapping from an existing unencrypted volume, you can include this parameter, but you must specify `false`. If you specify `true`, the request will fail. In this case, we recommend that you omit the parameter.
      - If you are creating a block device mapping from an existing encrypted volume, you can include this parameter, and specify either `true` or `false`. However, if you specify `false`, the parameter is ignored and the block device mapping is always encrypted. In this case, we recommend that you omit the parameter.
    - `iops`**Type**: `INT32`**Provider name**: `Iops`**Description**: The number of I/O operations per second (IOPS). For `gp3`, `io1`, and `io2` volumes, this represents the number of IOPS that are provisioned for the volume. For `gp2` volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting. The following are the supported values for each volume type:
      - `gp3`: 3,000 - 16,000 IOPS
      - `io1`: 100 - 64,000 IOPS
      - `io2`: 100 - 256,000 IOPS
For `io2` volumes, you can achieve up to 256,000 IOPS on [instances built on the Nitro System](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html#ec2-nitro-instances). On other instances, you can achieve performance up to 32,000 IOPS. This parameter is required for `io1` and `io2` volumes. The default for `gp3` volumes is 3,000 IOPS.
    - `kms_key_id`**Type**: `STRING`**Provider name**: `KmsKeyId`**Description**: Identifier (key ID, key alias, key ARN, or alias ARN) of the customer managed KMS key to use for EBS encryption. This parameter is only supported on `BlockDeviceMapping` objects called by [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html), [RequestSpotFleet](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RequestSpotFleet.html), and [RequestSpotInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RequestSpotInstances.html).
    - `outpost_arn`**Type**: `STRING`**Provider name**: `OutpostArn`**Description**: The ARN of the Outpost on which the snapshot is stored. This parameter is not supported when using [CreateImage](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateImage.html).
    - `snapshot_id`**Type**: `STRING`**Provider name**: `SnapshotId`**Description**: The ID of the snapshot.
    - `throughput`**Type**: `INT32`**Provider name**: `Throughput`**Description**: The throughput that the volume supports, in MiB/s. This parameter is valid only for `gp3` volumes. Valid Range: Minimum value of 125. Maximum value of 1000.
    - `volume_size`**Type**: `INT32`**Provider name**: `VolumeSize`**Description**: The size of the volume, in GiBs. You must specify either a snapshot ID or a volume size. If you specify a snapshot, the default is the snapshot size. You can specify a volume size that is equal to or larger than the snapshot size. The following are the supported sizes for each volume type:
      - `gp2` and `gp3`: 1 - 16,384 GiB
      - `io1`: 4 - 16,384 GiB
      - `io2`: 4 - 65,536 GiB
      - `st1` and `sc1`: 125 - 16,384 GiB
      - `standard`: 1 - 1024 GiB
    - `volume_type`**Type**: `STRING`**Provider name**: `VolumeType`**Description**: The volume type. For more information, see [Amazon EBS volume types](https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volume-types.html) in the Amazon EBS User Guide.
  - `no_device`**Type**: `STRING`**Provider name**: `NoDevice`**Description**: To omit the device from the block device mapping, specify an empty string. When this property is specified, the device is removed from the block device mapping regardless of the assigned value.
  - `virtual_name`**Type**: `STRING`**Provider name**: `VirtualName`**Description**: The virtual device name (`ephemeral`N). Instance store volumes are numbered starting from 0. An instance type with 2 available instance store volumes can specify mappings for `ephemeral0` and `ephemeral1`. The number of available instance store volumes depends on the instance type. After you connect to the instance, you must mount the volume. NVMe instance store volumes are automatically enumerated and assigned a device name. Including them in your block device mapping has no effect. Constraints: For M3 instances, you must specify instance store volumes in the block device mapping for the instance. When you launch an M3 instance, we ignore any instance store volumes specified in the block device mapping for the AMI.
- `ebs_optimized`**Type**: `BOOLEAN`**Provider name**: `EbsOptimized`**Description**: Indicates whether the instance is optimized for EBS I/O. This optimization provides dedicated throughput to Amazon EBS and an optimized configuration stack to provide optimal EBS I/O performance. This optimization isn't available with all instance types. Additional usage charges apply when using an EBS Optimized instance.**Default**: `false`
- `iam_instance_profile`**Type**: `STRUCT`**Provider name**: `IamInstanceProfile`**Description**: The IAM instance profile.
  - `arn`**Type**: `STRING`**Provider name**: `Arn`**Description**: The Amazon Resource Name (ARN) of the instance profile.
  - `name`**Type**: `STRING`**Provider name**: `Name`**Description**: The name of the instance profile.
- `image_id`**Type**: `STRING`**Provider name**: `ImageId`**Description**: The ID of the AMI.
- `instance_type`**Type**: `STRING`**Provider name**: `InstanceType`**Description**: The instance type. Only one instance type can be specified.
- `kernel_id`**Type**: `STRING`**Provider name**: `KernelId`**Description**: The ID of the kernel.
- `key_name`**Type**: `STRING`**Provider name**: `KeyName`**Description**: The name of the key pair.
- `monitoring`**Type**: `STRUCT`**Provider name**: `Monitoring`
  - `enabled`**Type**: `BOOLEAN`**Provider name**: `Enabled`**Description**: Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring is enabled.
- `network_interfaces`**Type**: `UNORDERED_LIST_STRUCT`**Provider name**: `NetworkInterfaces`**Description**: The network interfaces. If you specify a network interface, you must specify subnet IDs and security group IDs using the network interface.
  - `associate_carrier_ip_address`**Type**: `BOOLEAN`**Provider name**: `AssociateCarrierIpAddress`**Description**: Indicates whether to assign a carrier IP address to the network interface. You can only assign a carrier IP address to a network interface that is in a subnet in a Wavelength Zone. For more information about carrier IP addresses, see [Carrier IP address](https://docs.aws.amazon.com/wavelength/latest/developerguide/how-wavelengths-work.html#provider-owned-ip) in the Amazon Web Services Wavelength Developer Guide.
  - `associate_public_ip_address`**Type**: `BOOLEAN`**Provider name**: `AssociatePublicIpAddress`**Description**: Indicates whether to assign a public IPv4 address to an instance you launch in a VPC. The public IP address can only be assigned to a network interface for eth0, and can only be assigned to a new network interface, not an existing one. You cannot specify more than one network interface in the request. If launching into a default subnet, the default value is `true`. Amazon Web Services charges for all public IPv4 addresses, including public IPv4 addresses associated with running instances and Elastic IP addresses. For more information, see the Public IPv4 Address tab on the [Amazon VPC pricing page](http://aws.amazon.com/vpc/pricing/).
  - `connection_tracking_specification`**Type**: `STRUCT`**Provider name**: `ConnectionTrackingSpecification`**Description**: A security group connection tracking specification that enables you to set the timeout for connection tracking on an Elastic network interface. For more information, see [Connection tracking timeouts](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/security-group-connection-tracking.html#connection-tracking-timeouts) in the Amazon EC2 User Guide.
    - `tcp_established_timeout`**Type**: `INT32`**Provider name**: `TcpEstablishedTimeout`**Description**: Timeout (in seconds) for idle TCP connections in an established state. Min: 60 seconds. Max: 432000 seconds (5 days). Default: 432000 seconds. Recommended: Less than 432000 seconds.
    - `udp_stream_timeout`**Type**: `INT32`**Provider name**: `UdpStreamTimeout`**Description**: Timeout (in seconds) for idle UDP flows classified as streams which have seen more than one request-response transaction. Min: 60 seconds. Max: 180 seconds (3 minutes). Default: 180 seconds.
    - `udp_timeout`**Type**: `INT32`**Provider name**: `UdpTimeout`**Description**: Timeout (in seconds) for idle UDP flows that have seen traffic only in a single direction or a single request-response transaction. Min: 30 seconds. Max: 60 seconds. Default: 30 seconds.
  - `delete_on_termination`**Type**: `BOOLEAN`**Provider name**: `DeleteOnTermination`**Description**: If set to `true`, the interface is deleted when the instance is terminated. You can specify `true` only if creating a new network interface when launching an instance.
  - `description`**Type**: `STRING`**Provider name**: `Description`**Description**: The description of the network interface. Applies only if creating a network interface when launching an instance.
  - `device_index`**Type**: `INT32`**Provider name**: `DeviceIndex`**Description**: The position of the network interface in the attachment order. A primary network interface has a device index of 0. If you specify a network interface when launching an instance, you must specify the device index.
  - `ena_srd_specification`**Type**: `STRUCT`**Provider name**: `EnaSrdSpecification`**Description**: Specifies the ENA Express settings for the network interface that's attached to the instance.
    - `ena_srd_enabled`**Type**: `BOOLEAN`**Provider name**: `EnaSrdEnabled`**Description**: Specifies whether ENA Express is enabled for the network interface when you launch an instance from your launch template.
    - `ena_srd_udp_specification`**Type**: `STRUCT`**Provider name**: `EnaSrdUdpSpecification`**Description**: Contains ENA Express settings for UDP network traffic in your launch template.
      - `ena_srd_udp_enabled`**Type**: `BOOLEAN`**Provider name**: `EnaSrdUdpEnabled`**Description**: Indicates whether UDP traffic uses ENA Express for your instance. To ensure that UDP traffic can use ENA Express when you launch an instance, you must also set EnaSrdEnabled in the EnaSrdSpecificationRequest to `true` in your launch template.
  - `groups`**Type**: `UNORDERED_LIST_STRING`**Provider name**: `Groups`**Description**: The IDs of the security groups for the network interface. Applies only if creating a network interface when launching an instance.
  - `interface_type`**Type**: `STRING`**Provider name**: `InterfaceType`**Description**: The type of network interface. If you specify `efa-only`, do not assign any IP addresses to the network interface. EFA-only network interfaces do not support IP addresses. Valid values: `interface` | `efa` | `efa-only`
  - `ipv4_prefix_count`**Type**: `INT32`**Provider name**: `Ipv4PrefixCount`**Description**: The number of IPv4 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the `Ipv4Prefix` option.
  - `ipv4_prefixes`**Type**: `UNORDERED_LIST_STRUCT`**Provider name**: `Ipv4Prefixes`**Description**: The IPv4 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the `Ipv4PrefixCount` option.
    - `ipv4_prefix`**Type**: `STRING`**Provider name**: `Ipv4Prefix`**Description**: The IPv4 prefix. For information, see [Assigning prefixes to network interfaces](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-prefix-eni.html) in the Amazon EC2 User Guide.
  - `ipv6_address_count`**Type**: `INT32`**Provider name**: `Ipv6AddressCount`**Description**: A number of IPv6 addresses to assign to the network interface. Amazon EC2 chooses the IPv6 addresses from the range of the subnet. You cannot specify this option and the option to assign specific IPv6 addresses in the same request. You can specify this option if you've specified a minimum number of instances to launch.
  - `ipv6_addresses`**Type**: `UNORDERED_LIST_STRUCT`**Provider name**: `Ipv6Addresses`**Description**: The IPv6 addresses to assign to the network interface. You cannot specify this option and the option to assign a number of IPv6 addresses in the same request. You cannot specify this option if you've specified a minimum number of instances to launch.
    - `ipv6_address`**Type**: `STRING`**Provider name**: `Ipv6Address`**Description**: The IPv6 address.
    - `is_primary_ipv6`**Type**: `BOOLEAN`**Provider name**: `IsPrimaryIpv6`**Description**: Determines if an IPv6 address associated with a network interface is the primary IPv6 address. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. For more information, see [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html).
  - `ipv6_prefix_count`**Type**: `INT32`**Provider name**: `Ipv6PrefixCount`**Description**: The number of IPv6 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the `Ipv6Prefix` option.
  - `ipv6_prefixes`**Type**: `UNORDERED_LIST_STRUCT`**Provider name**: `Ipv6Prefixes`**Description**: The IPv6 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the `Ipv6PrefixCount` option.
    - `ipv6_prefix`**Type**: `STRING`**Provider name**: `Ipv6Prefix`**Description**: The IPv6 prefix.
  - `network_card_index`**Type**: `INT32`**Provider name**: `NetworkCardIndex`**Description**: The index of the network card. Some instance types support multiple network cards. The primary network interface must be assigned to network card index 0. The default is network card index 0. If you are using [RequestSpotInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RequestSpotInstances.html) to create Spot Instances, omit this parameter because you can't specify the network card index when using this API. To specify the network card index, use [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html).
  - `network_interface_id`**Type**: `STRING`**Provider name**: `NetworkInterfaceId`**Description**: The ID of the network interface. If you are creating a Spot Fleet, omit this parameter because you can't specify a network interface ID in a launch specification.
  - `primary_ipv6`**Type**: `BOOLEAN`**Provider name**: `PrimaryIpv6`**Description**: The primary IPv6 address of the network interface. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. For more information about primary IPv6 addresses, see [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html).
  - `private_ip_address`**Type**: `STRING`**Provider name**: `PrivateIpAddress`**Description**: The private IPv4 address of the network interface. Applies only if creating a network interface when launching an instance. You cannot specify this option if you're launching more than one instance in a [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html) request.
  - `private_ip_addresses`**Type**: `UNORDERED_LIST_STRUCT`**Provider name**: `PrivateIpAddresses`**Description**: The private IPv4 addresses to assign to the network interface. Only one private IPv4 address can be designated as primary. You cannot specify this option if you're launching more than one instance in a [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html) request.
    - `primary`**Type**: `BOOLEAN`**Provider name**: `Primary`**Description**: Indicates whether the private IPv4 address is the primary private IPv4 address. Only one IPv4 address can be designated as primary.
    - `private_ip_address`**Type**: `STRING`**Provider name**: `PrivateIpAddress`**Description**: The private IPv4 address.
  - `secondary_private_ip_address_count`**Type**: `INT32`**Provider name**: `SecondaryPrivateIpAddressCount`**Description**: The number of secondary private IPv4 addresses. You can't specify this option and specify more than one private IP address using the private IP addresses option. You cannot specify this option if you're launching more than one instance in a [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html) request.
  - `subnet_id`**Type**: `STRING`**Provider name**: `SubnetId`**Description**: The ID of the subnet associated with the network interface. Applies only if creating a network interface when launching an instance.
- `placement`**Type**: `STRUCT`**Provider name**: `Placement`**Description**: The placement information for the instance.
  - `availability_zone`**Type**: `STRING`**Provider name**: `AvailabilityZone`**Description**: The Availability Zone. [Spot Fleet only] To specify multiple Availability Zones, separate them using commas; for example, "us-west-2a, us-west-2b".
  - `group_name`**Type**: `STRING`**Provider name**: `GroupName`**Description**: The name of the placement group.
  - `tenancy`**Type**: `STRING`**Provider name**: `Tenancy`**Description**: The tenancy of the instance (if the instance is running in a VPC). An instance with a tenancy of `dedicated` runs on single-tenant hardware. The `host` tenancy is not supported for Spot Instances.
- `ramdisk_id`**Type**: `STRING`**Provider name**: `RamdiskId`**Description**: The ID of the RAM disk.
- `security_groups`**Type**: `UNORDERED_LIST_STRUCT`**Provider name**: `SecurityGroups`**Description**: The IDs of the security groups.
  - `group_id`**Type**: `STRING`**Provider name**: `GroupId`**Description**: The ID of the security group.
  - `group_name`**Type**: `STRING`**Provider name**: `GroupName`**Description**: The name of the security group.
- `subnet_id`**Type**: `STRING`**Provider name**: `SubnetId`**Description**: The ID of the subnet in which to launch the instance.
- `user_data`**Type**: `STRING`**Provider name**: `UserData`**Description**: The base64-encoded user data that instances use when starting up. User data is limited to 16 KB.

## `launched_availability_zone`{% #launched_availability_zone %}

**Type**: `STRING`**Provider name**: `LaunchedAvailabilityZone`**Description**: The Availability Zone in which the request is launched.

## `product_description`{% #product_description %}

**Type**: `STRING`**Provider name**: `ProductDescription`**Description**: The product description associated with the Spot Instance.

## `spot_instance_request_arn`{% #spot_instance_request_arn %}

**Type**: `STRING`

## `spot_instance_request_id`{% #spot_instance_request_id %}

**Type**: `STRING`**Provider name**: `SpotInstanceRequestId`**Description**: The ID of the Spot Instance request.

## `spot_price`{% #spot_price %}

**Type**: `STRING`**Provider name**: `SpotPrice`**Description**: The maximum price per unit hour that you are willing to pay for a Spot Instance. We do not recommend using this parameter because it can lead to increased interruptions. If you do not specify this parameter, you will pay the current Spot price.If you specify a maximum price, your instances will be interrupted more frequently than if you do not specify this parameter.

## `state`{% #state %}

**Type**: `STRING`**Provider name**: `State`**Description**: The state of the Spot Instance request. Spot request status information helps track your Spot Instance requests. For more information, see [Spot request status](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-request-status.html) in the Amazon EC2 User Guide.

## `status`{% #status %}

**Type**: `STRUCT`**Provider name**: `Status`**Description**: The status code and status message describing the Spot Instance request.

- `code`**Type**: `STRING`**Provider name**: `Code`**Description**: The status code. For a list of status codes, see [Spot request status codes](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-request-status.html#spot-instance-request-status-understand) in the Amazon EC2 User Guide.
- `message`**Type**: `STRING`**Provider name**: `Message`**Description**: The description for the status code.
- `update_time`**Type**: `TIMESTAMP`**Provider name**: `UpdateTime`**Description**: The date and time of the most recent status update, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ).

## `tags`{% #tags %}

**Type**: `UNORDERED_LIST_STRING`

## `type`{% #type %}

**Type**: `STRING`**Provider name**: `Type`**Description**: The Spot Instance request type.

## `valid_from`{% #valid_from %}

**Type**: `TIMESTAMP`**Provider name**: `ValidFrom`**Description**: The start date of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). The request becomes active at this date and time.

## `valid_until`{% #valid_until %}

**Type**: `TIMESTAMP`**Provider name**: `ValidUntil`**Description**: The end date of the request, in UTC format (YYYY-MM-DDTHH:MM:SSZ).

- For a persistent request, the request remains active until the `validUntil` date and time is reached. Otherwise, the request remains active until you cancel it.
- For a one-time request, the request remains active until all instances launch, the request is canceled, or the `validUntil` date and time is reached. By default, the request is valid for 7 days from the date the request was created.