Compatibility

Supported languages:

Supported test frameworks:

Supported test runners:

Configuring reporting method

To report test results to Datadog, you need to configure the datadog-ci gem:

Installing the Ruby test optimization library

To install the Ruby test optimization gem run:

bundle add datadog-ci --group "test"

Alternatively, add it to your Gemfile manually:

1. Add the datadog-ci gem to your Gemfile:

gem "datadog-ci", "~> 1.0", group: :test

2. Install the gem by running bundle install

Instrumenting your tests

Follow these steps if your CI Provider is not supported for auto-instrumentation (see Configuring reporting method).

1. Set the following environment variables to configure the tracer:

DD_CIVISIBILITY_ENABLED=true (Required)

Enables the Test Optimization product.

DD_ENV (Required)

Environment where the tests are being run (for example: local when running tests on a developer workstation or ci when running them on a CI provider).

DD_SERVICE (Optional)

Name of the service or library being tested.

2. Prepend your test command with this datadog-ci CLI wrapper:

bundle exec ddcirb exec bundle exec rake test

Alternatively, set RUBYOPT environment variable to "-rbundler/setup -rdatadog/ci/auto_instrument" and don’t modify your test command.

Adding custom tags to tests

You can add custom tags to your tests by using the current active test:

require "datadog/ci"

# inside your test
Datadog::CI.active_test&.set_tag("test_owner", "my_team")
# test continues normally
# ...

To create filters or group by fields for these tags, you must first create facets. For more information about adding tags, see the Adding Tags section of the Ruby custom instrumentation documentation.

Adding custom measures to tests

Like tags, you can add custom measures to your tests by using the current active test:

require "datadog/ci"

# inside your test
Datadog::CI.active_test&.set_metric("memory_allocations", 16)
# test continues normally
# ...

For more information on custom measures, see the Add Custom Measures Guide.

Configuration settings

The following is a list of the most important configuration settings that can be used with the test optimization library, either in code by using a Datadog.configure block, or using environment variables:

service

Name of the service or library under test.
Environment variable: DD_SERVICE
Default: $PROGRAM_NAME
Example: my-ruby-app

env

Name of the environment where tests are being run.
Environment variable: DD_ENV
Default: none
Examples: local, ci

For more information about service and env reserved tags, see Unified Service Tagging.

The following environment variable can be used to configure the location of the Datadog Agent:

DD_TRACE_AGENT_URL

Datadog Agent URL for trace collection in the form http://hostname:port.
Default: http://localhost:8126

All other Datadog Tracer configuration options can also be used.

Using additional instrumentation

It can be useful to have rich tracing information about your tests that includes time spent performing database operations or other external calls, as seen in the following flame graph:

To achieve this, configure additional instrumentation in your configure block:

if ENV["DD_ENV"] == "ci"
  Datadog.configure do |c|
    #  ... ci configs and instrumentation here ...
    c.tracing.instrument :redis
    c.tracing.instrument :pg
    # ... any other instrumentations supported by datadog gem ...
  end
end

Alternatively, you can enable automatic APM instrumentation in test_helper/spec_helper:

require "datadog/auto_instrument" if ENV["DD_ENV"] == "ci"

Note: In CI mode, these traces are submitted to Test Optimization, and they do not show up in Datadog APM.

For the full list of available instrumentation methods, see the tracing documentation

Collecting Git metadata

Datadog tire profit des données Git pour vous présenter les résultats de vos tests et les regrouper par référentiel, branche et commit. Les métadonnées Git sont automatiquement recueillies par l’instrumentation de test, à partir des variables d’environnement du fournisseur de CI et du dossier local .git dans le chemin du projet, le cas échéant.

Si vous exécutez des tests dans des fournisseurs de CI non pris en charge, ou sans dossier .git, vous pouvez configurer manuellement les données Git à l’aide de variables d’environnement. Ces dernières sont prioritaires et remplacent les informations détectées automatiquement. Configurez les variables d’environnement suivantes pour obtenir des données Git :

DD_GIT_REPOSITORY_URL

URL du référentiel dans lequel le code est stocké. Les URL HTTP et SSH sont prises en charge.
Exemple : git@github.com:MyCompany/MyApp.git, https://github.com/MyCompany/MyApp.git

DD_GIT_BRANCH

Branche Git testée. Ne renseignez pas cette variable si vous fournissez à la place des informations sur les tags.
Exemple : develop

DD_GIT_TAG

Tag Git testé (le cas échéant). Ne renseignez pas cette variable si vous fournissez à la place des informations sur la branche.
Exemple : 1.0.1

DD_GIT_COMMIT_SHA

Hash entier du commit.
Exemple : a18ebf361cc831f5535e58ec4fae04ffd98d8152

DD_GIT_COMMIT_MESSAGE

Message du commit.
Exemple : Set release number

DD_GIT_COMMIT_AUTHOR_NAME

Nom de l’auteur du commit.
Exemple : John Smith

DD_GIT_COMMIT_AUTHOR_EMAIL

E-mail de l’auteur du commit.
Exemple : john@example.com

DD_GIT_COMMIT_AUTHOR_DATE

Date de l’auteur du commit, au format ISO 8601.
Exemple : 2021-03-12T16:00:28Z

DD_GIT_COMMIT_COMMITTER_NAME

Nom du responsable du commit.
Exemple : Jane Smith

DD_GIT_COMMIT_COMMITTER_EMAIL

E-mail du responsable du commit.
Exemple : jane@example.com

DD_GIT_COMMIT_COMMITTER_DATE

Date du responsable du commit, au format ISO 8601.
Exemple : 2021-03-12T16:00:28Z

Manually instrumenting your tests

Auto-instrumentation adds additional performance overhead at the code loading stage. It can be especially noticeable for large repositories with a lot of dependencies. If your project takes 20+ seconds to start, you are likely to benefit from manually instrumenting your tests.

require "rspec"
require "datadog/ci"

# Only activates test instrumentation on CI
if ENV["DD_ENV"] == "ci"
  Datadog.configure do |c|
    # enables test optimization
    c.ci.enabled = true

    # The name of the service or library under test
    c.service = "my-ruby-app"

    # Enables the RSpec instrumentation
    c.ci.instrument :rspec
  end
end

DD_ENV=ci bundle exec rake spec

require "minitest"
require "datadog/ci"

# Only activates test instrumentation on CI
if ENV["DD_ENV"] == "ci"
  Datadog.configure do |c|
    # enables test optimization
    c.ci.enabled = true

    # The name of the service or library under test
    c.service = "my-ruby-app"

    c.ci.instrument :minitest
  end
end

DD_ENV=ci bundle exec rake test

require "datadog/ci"
require "minitest/autorun"

if ENV["DD_ENV"] == "ci"
  Datadog.configure do |c|
    c.ci.enabled = true

    c.service = "my-ruby-app"

    c.ci.instrument :minitest
  end
end

require "cucumber"
require "datadog/ci"

# Only activates test instrumentation on CI
if ENV["DD_ENV"] == "ci"
  Datadog.configure do |c|
    # enables test optimization
    c.ci.enabled = true

    # The name of the service or library under test
    c.service = "my-ruby-app"

    # Enables the Cucumber instrumentation
    c.ci.instrument :cucumber
  end
end

DD_ENV=ci bundle exec rake cucumber

Using library’s public API for unsupported test frameworks

If you use RSpec, Minitest, or Cucumber, do not use the manual testing API, as Test Optimization automatically instruments them and sends the test results to Datadog. The manual testing API is incompatible with already supported testing frameworks.

Use the manual testing API only if you use an unsupported testing framework or have a different testing mechanism. Full public API documentation is available on YARD site.

Domain model

The API is based around four concepts: test session, test module, test suite, and test.

Test session

A test session represents a test command run.

To start a test session, call Datadog::CI.start_test_session and pass the Datadog service and tags (such as the test framework you are using).

When all your tests have finished, call Datadog::CI::TestSession#finish, which closes the session and sends the session trace to the backend.

Test module

A test module represents a smaller unit of work within a session. For supported test frameworks, test module is always same as test session. For your use case, this could be a package in your componentized application.

To start a test module, call Datadog::CI.start_test_module and pass the name of the module.

When the module run has finished, call Datadog::CI::TestModule#finish.

Test suite

A test suite comprises a set of tests that test similar functionality. A single suite usually corresponds to a single file where tests are defined.

Create test suites by calling Datadog::CI#start_test_suite and passing the name of the test suite.

Call Datadog::CI::TestSuite#finish when all the related tests in the suite have finished their execution.

Test

A test represents a single test case that is executed as part of a test suite. Usually it corresponds to a method that contains testing logic.

Create tests in a suite by calling Datadog::CI#start_test or Datadog::CI.trace_test and passing the name of the test and name of the test suite. Test suite name must be the same as name of the test suite started in previous step.

Call Datadog::CI::Test#finish when a test has finished execution.

Code example

The following code represents example usage of the API:

require "datadog/ci"

Datadog.configure do |c|
  c.service = "my-test-service"
  c.ci.enabled = true
end

def run_test_suite(tests, test_suite_name)
  test_suite = Datadog::CI.start_test_suite(test_suite_name)

  run_tests(tests, test_suite_name)

  test_suite.passed!
  test_suite.finish
end

def run_tests(tests, test_suite_name)
  tests.each do |test_name|
    Datadog::CI.trace_test(test_name, test_suite_name) do |test|
      test.passed!
    end
  end
end

Datadog::CI.start_test_session(
  tags: {
    Datadog::CI::Ext::Test::TAG_FRAMEWORK => "my-framework",
    Datadog::CI::Ext::Test::TAG_FRAMEWORK_VERSION => "0.0.1",
  }
)
Datadog::CI.start_test_module("my-test-module")

run_test_suite(["test1", "test2", "test3"], "test-suite-name")

Datadog::CI.active_test_module&.passed!
Datadog::CI.active_test_module&.finish

Datadog::CI.active_test_session&.passed!
Datadog::CI.active_test_session&.finish

Further reading

Documentation, liens et articles supplémentaires utiles:

Forwarding Environment Variables for Tests in ContainersDOCUMENTATION Explore Test Results and PerformanceDOCUMENTATION Troubleshooting Test OptimizationDOCUMENTATION