Cette page n'est pas encore disponible en français, sa traduction est en cours.
Si vous avez des questions ou des retours sur notre projet de traduction actuel, n'hésitez pas à nous contacter.

Create custom grok rules to parse the full message or a specific attribute of your raw event. As a best practice, it is recommended to use at most 10 parsing rules within a grok processor.

Parsing example 1

Click Parse My Events to kickstart a set of three parsing rules for the events flowing through the underlying pipeline. Refine attribute naming from there, and add new rules for other type of events if needed. This feature requires that the corresponding events are being indexed, and actually flowing in—you can temporarily deactivate or sample down exclusion filters to make this work for you.

Select a sample by clicking on it to trigger its evaluation against the parsing rule and display the result at the bottom of the screen.

Up to five samples can be saved with the processor, and each sample can be up to 5000 characters in length. All samples show a status (match or no match), which highlights if one of the parsing rules of the grok parser matches the sample.

Grok Syntax

The Grok Parser extracts attributes from semi-structured text messages. Grok comes with reusable patterns to parse integers, IP addresses, hostnames, and more. These values must be sent into the grok parser as strings.

You can write parsing rules with the %{MATCHER:EXTRACT:FILTER} syntax:

  • Matcher: A rule (possibly a reference to another token rule) that describes what to expect (number, word, notSpace, etc.).

  • Extract (optional): An identifier representing the capture destination for the piece of text matched by the Matcher.

  • Filter (optional): A post-processor of the match to transform it.

Example for a classic unstructured event:

john connected on 11/08/2017

With the following parsing rule:

MyParsingRule %{word:user} connected on %{date("MM/dd/yyyy"):date}

After processing, the following structured event is generated:

Parsing example 1

Note:

  • If you have multiple parsing rules in a single Grok parser:
    • Only one can match any given event. The first one that matches, from top to bottom, is the one that does the parsing.
    • Each rule can reference parsing rules defined above itself in the list.
  • You must have unique rule names within the same Grok parser.
  • The rule name must contain only: alphanumeric characters, _, and .. It must start with an alphanumeric character.
  • Properties with null or empty values are not displayed.
  • The regex matcher applies an implicit ^, to match the start of a string, and $, to match the end of a string.
  • Certain events can produce large gaps of whitespace. Use \n and \s+ to account for newlines and whitespace.

Matcher and filter

Here is a list of all the matchers and filters natively implemented by Datadog:

date("pattern"[, "timezoneId"[, "localeId"]])
Matches a date with the specified pattern and parses to produce a Unix timestamp. See the date Matcher examples.
regex("pattern")
Matches a regex. Check the regex Matcher examples.
notSpace
Matches any string until the next space.
boolean("truePattern", "falsePattern")
Matches and parses a Boolean, optionally defining the true and false patterns (defaults to true and false, ignoring case).
numberStr
Matches a decimal floating point number and parses it as a string.
number
Matches a decimal floating point number and parses it as a double precision number.
numberExtStr
Matches a floating point number (with scientific notation support) and parses it as a string.
numberExt
Matches a floating point number (with scientific notation support) and parses it as a double precision number.
integerStr
Matches an integer number and parses it as a string.
integer
Matches an integer number and parses it as an integer number.
integerExtStr
Matches an integer number (with scientific notation support) and parses it as a string.
integerExt
Matches an integer number (with scientific notation support) and parses it as an integer number.
word
Matches characters from a-z, A-Z, 0-9, including the _ (underscore) character.
doubleQuotedString
Matches a double-quoted string.
singleQuotedString
Matches a single-quoted string.
quotedString
Matches a double-quoted or single-quoted string.
uuid
Matches a UUID.
mac
Matches a MAC address.
ipv4
Matches an IPV4.
ipv6
Matches an IPV6.
ip
Matches an IP (v4 or v6).
hostname
Matches a hostname.
ipOrHost
Matches a hostname or IP.
port
Matches a port number.
data
Matches any string including spaces and newlines. Equivalent to .* in regex. Use when none of above patterns is appropriate.
number
Parses a match as double precision number.
integer
Parses a match as an integer number.
boolean
Parses ’true’ and ‘false’ strings as booleans ignoring case.
nullIf("value")
Returns null if the match is equal to the provided value.
json
Parses properly formatted JSON.
rubyhash
Parses a properly formatted Ruby hash such as {name => "John", "job" => {"company" => "Big Company", "title" => "CTO"}}
useragent([decodeuricomponent:true/false])
Parses a user-agent and returns a JSON object that contains the device, OS, and the browser represented by the Agent. [Check the User Agent processor][1].
querystring
Extracts all the key-value pairs in a matching URL query string (for example, ?productId=superproduct&promotionCode=superpromo).
decodeuricomponent
Decodes URI components. For instance, it transforms %2Fservice%2Ftest into /service/test.
lowercase
Returns the lower-cased string.
uppercase
Returns the upper-cased string.
keyvalue([separatorStr[, characterAllowList[, quotingStr[, delimiter]]]])
Extracts the key value pattern and returns a JSON object. See the key-value filter examples.
xml
Parses properly formatted XML. See the XML filter examples.
csv(headers[, separator[, quotingcharacter]])
Parses properly formatted CSV or TSV lines. See the CSV filter examples.
scale(factor)
Multiplies the expected numerical value by the provided factor.
array([[openCloseStr, ] separator][, subRuleOrFilter)
Parses a string sequence of tokens and returns it as an array. See the list to array example.
url
Parses a URL and returns all the tokenized members (domain, query params, port, etc.) in a JSON object.

Advanced settings

At the bottom of your Grok processor tiles, there is an Advanced Settings section:

Advanced Settings

Parsing a specific text attribute

Use the Extract from field to apply your Grok processor on a given text attribute instead of the default message attribute.

For example, consider an event containing a command.line attribute that should be parsed as a key-value. You could parse this event as follows:

Parsing Command Line

Using helper rules to factorize multiple parsing rules

Use the Helper Rules field to define tokens for your parsing rules. Helper rules help you to factorize Grok patterns across your parsing rules. This is useful when you have several rules in the same Grok parser that use the same tokens.

Example for a classic unstructured event:

john id:12345 connected on 11/08/2017 on server XYZ in production

Use the following parsing rule:

MyParsingRule %{user} %{connection} %{server}

With the following helpers:

user %{word:user.name} id:%{integer:user.id}
connection connected on %{date("MM/dd/yyyy"):connect_date}
server on server %{notSpace:server.name} in %{notSpace:server.env}
helper rules

Examples

Some examples demonstrating how to use parsers:

Key value or logfmt

This is the key-value core filter: keyvalue([separatorStr[, characterAllowList[, quotingStr[, delimiter]]]]) where:

  • separatorStr: defines the separator between key and values. Defaults to =.
  • characterAllowList: defines extra non-escaped value chars in addition to the default \\w.\\-_@. Used only for non-quoted values (for example, key=@valueStr).
  • quotingStr: defines quotes, replacing the default quotes detection: <>, "", ''.
  • delimiter: defines the separator between the different key values pairs (for example, |is the delimiter in key1=value1|key2=value2). Defaults to (normal space), , and ;.

Use filters such as keyvalue to more-easily map strings to attributes for keyvalue or logfmt formats:

Event:

user=john connect_date=11/08/2017 id=123 action=click

Rule:

rule %{data::keyvalue}
Parsing example 2

You don’t need to specify the name of your parameters as they are already contained in the event. If you add an extract attribute my_attribute in your rule pattern you will see:

Parsing example 2 bis

If = is not the default separator between your key and values, add a parameter in your parsing rule with a separator.

Event:

user: john connect_date: 11/08/2017 id: 123 action: click

Rule:

rule %{data::keyvalue(": ")}
Key value parser

If event contain special characters in an attribute value, such as / in a url for instance, add it to the allowlist in the parsing rule:

Event:

url=https://app.datadoghq.com/event/stream user=john

Rule:

rule %{data::keyvalue("=","/:")}
Key value allowlist

Other examples:

Raw stringParsing ruleResult
key=valueStr%{data::keyvalue}{“key”: “valueStr”}
key=<valueStr>%{data::keyvalue}{“key”: “valueStr”}
“key”=“valueStr”%{data::keyvalue}{“key”: “valueStr”}
key:valueStr%{data::keyvalue(":")}{“key”: “valueStr”}
key:"/valueStr"%{data::keyvalue(":", "/")}{“key”: “/valueStr”}
/key:/valueStr%{data::keyvalue(":", "/")}{"/key": “/valueStr”}
key:={valueStr}%{data::keyvalue(":=", "", "{}")}{“key”: “valueStr”}
key1=value1|key2=value2%{data::keyvalue("=", "", "", "|")}{“key1”: “value1”, “key2”: “value2”}
key1=“value1”|key2=“value2”%{data::keyvalue("=", "", "", "|")}{“key1”: “value1”, “key2”: “value2”}

Multiple QuotingString example: When multiple quotingstring are defined, the default behavior is replaced with a defined quoting character. The key-value always matches inputs without any quoting characters, regardless of what is specified in quotingStr. When quoting characters are used, the characterAllowList is ignored as everything between the quoting characters is extracted.

Event:

key1:=valueStr key2:=</valueStr2> key3:="valueStr3"

Rule:

rule %{data::keyvalue(":=","","<>")}

Result:

{"key1": "valueStr", "key2": "/valueStr2"}

Note:

  • Empty values (key=) or null values (key=null) are not displayed in the output JSON.
  • If you define a keyvalue filter on a data object, and this filter is not matched, then an empty JSON {} is returned (for example, input: key:=valueStr, parsing rule: rule_test %{data::keyvalue("=")}, output: {}).
  • Defining "" as quotingStr keeps the default configuration for quoting.

Parsing dates

The date matcher transforms your timestamp in the EPOCH format (unit of measure millisecond).

Raw stringParsing ruleResult
14:20:15%{date("HH:mm:ss"):date}{“date”: 51615000}
02:20:15 PM%{date("hh:mm:ss a"):date}{“date”: 51615000}
11/10/2014%{date("dd/MM/yyyy"):date}{“date”: 1412978400000}
Thu Jun 16 08:29:03 2016%{date("EEE MMM dd HH:mm:ss yyyy"):date}{“date”: 1466065743000}
Tue Nov 1 08:29:03 2016%{date("EEE MMM d HH:mm:ss yyyy"):date}{“date”: 1466065743000}
06/Mar/2013:01:36:30 +0900%{date("dd/MMM/yyyy:HH:mm:ss Z"):date}{“date”: 1362501390000}
2016-11-29T16:21:36.431+0000%{date("yyyy-MM-dd'T'HH:mm:ss.SSSZ"):date}{“date”: 1480436496431}
2016-11-29T16:21:36.431+00:00%{date("yyyy-MM-dd'T'HH:mm:ss.SSSZZ"):date}{“date”: 1480436496431}
06/Feb/2009:12:14:14.655%{date("dd/MMM/yyyy:HH:mm:ss.SSS"):date}{“date”: 1233922454655}
2007-08-31 19:22:22.427 ADT%{date("yyyy-MM-dd HH:mm:ss.SSS z"):date}{“date”: 1188598942427}
Thu Jun 16 08:29:03 20161%{date("EEE MMM dd HH:mm:ss yyyy","Europe/Paris"):date}{“date”: 1466058543000}
Thu Jun 16 08:29:03 20161%{date("EEE MMM dd HH:mm:ss yyyy","UTC+5"):date}{“date”: 1466047743000}
Thu Jun 16 08:29:03 20161%{date("EEE MMM dd HH:mm:ss yyyy","+3"):date}{“date”: 1466054943000}

1 Use the timezone parameter if you perform your own localizations and your timestamps are not in UTC. The supported format for timezones are:

  • GMT, UTC, UT or Z
  • +h, +hh, +hh:mm, -hh:mm, +hhmm, -hhmm, +hh:mm:ss, -hh:mm:ss, +hhmmss or -hhmmss . The maximum supported range is from +18:00 to -18:00 inclusive.
  • Timezones starting with UTC+, UTC-, GMT+, GMT-, UT+ or UT-. The maximum supported range is from +18:00 to -18:00 inclusive.
  • Timezone IDs pulled from the TZ database. For more information, see TZ database names.

Note: Parsing a date doesn’t set its value as the event official date. For this use the Event Date Remapper in a subsequent Processor.

Alternating pattern

If you have events with two possible formats which differ in only one attribute, set a single rule using alternating with (<REGEX_1>|<REGEX_2>). This rule is equivalent to a Boolean OR.

Event:

john connected on 11/08/2017
12345 connected on 11/08/2017

Rule: Note that “id” is an integer and not a string.

MyParsingRule (%{integer:user.id}|%{word:user.firstname}) connected on %{date("MM/dd/yyyy"):connect_date}

Results:

Parsing example 4
Parsing example 4 bis

Optional attribute

Some events contain values that only appear part of the time. In this case, make attribute extraction optional with ()?.

Event:

john 1234 connected on 11/08/2017

Rule:

MyParsingRule %{word:user.firstname} (%{integer:user.id} )?connected on %{date("MM/dd/yyyy"):connect_date}

Note: A rule will not match if you include a space after the first word in the optional section.

Parsing example 5
Parsing example 5 bis

Nested JSON

Use the json filter to parse a JSON object nested after a raw text prefix:

Event:

Sep 06 09:13:38 vagrant program[123]: server.1 {"method":"GET", "status_code":200, "url":"https://app.datadoghq.com/logs/pipelines", "duration":123456}

Rule:

parsing_rule %{date("MMM dd HH:mm:ss"):timestamp} %{word:vm} %{word:app}\[%{number:logger.thread_id}\]: %{notSpace:server} %{data::json}
Nested JSON Parsing example

Regex

Event:

john_1a2b3c4 connected on 11/08/2017

Rule:

MyParsingRule %{regex("[a-z]*"):user.firstname}_%{regex("[a-zA-Z0-9]*"):user.id} .*
Parsing example 6

List to array

Use the array([[openCloseStr, ] separator][, subRuleOrFilter) filter to extract a list into an array in a single attribute. The subRuleOrFilter is optional and accepts these filters.

Event:

Users [John, Oliver, Marc, Tom] have been added to the database

Rule:

myParsingRule Users %{data:users:array("[]",",")} have been added to the database
Parsing example 6

Event:

Users {John-Oliver-Marc-Tom} have been added to the database

Rule:

myParsingRule Users %{data:users:array("{}","-")} have been added to the database

Rule using subRuleOrFilter:

myParsingRule Users %{data:users:array("{}","-", uppercase)} have been added to the database

Glog format

Kubernetes components sometimes log in the glog format; this example is from the Kube Scheduler item in the Pipeline Library.

Example Event:

W0424 11:47:41.605188       1 authorization.go:47] Authorization is disabled

Parsing rule:

kube_scheduler %{regex("\\w"):level}%{date("MMdd HH:mm:ss.SSSSSS"):timestamp}\s+%{number:logger.thread_id} %{notSpace:logger.name}:%{number:logger.lineno}\] %{data:msg}

And extracted JSON:

{
  "level": "W",
  "timestamp": 1587728861605,
  "logger": {
    "thread_id": 1,
    "name": "authorization.go"
  },
  "lineno": 47,
  "msg": "Authorization is disabled"
}

Parsing XML

The XML parser transforms XML formatted messages into JSON.

Event:

<book category="CHILDREN">
  <title lang="en">Harry Potter</title>
  <author>J K. Rowling</author>
  <year>2005</year>
</book>

Rule:

rule %{data::xml}

Result:

{
"book": {
  "year": "2005",
  "author": "J K. Rowling",
  "category": "CHILDREN",
  "title": {
    "lang": "en",
    "value": "Harry Potter"
  }
}
}

Notes:

  • If the XML contains tags that have both an attribute and a string value between the two tags, a value attribute is generated. For example: <title lang="en">Harry Potter</title> is converted to {"title": {"lang": "en", "value": "Harry Potter" } }
  • Repeated tags are automatically converted to arrays. For example: <bookstore><book>Harry Potter</book><book>Everyday Italian</book></bookstore> is converted to { "bookstore": { "book": [ "Harry Potter", "Everyday Italian" ] } }

Parsing CSV

Use the CSV filter to more-easily map strings to attributes when separated by a given character (, by default).

The CSV filter is defined as csv(headers[, separator[, quotingcharacter]]) where:

  • headers: Defines the keys name separated by ,. Keys names must start with alphabetical character and can contain any alphanumerical character in addition to _.
  • separator: Defines separators used to separate the different values. Only one character is accepted. Default: ,. Note: Use tab for the separator to represent the tabulation character for TSVs.
  • quotingcharacter: Defines the quoting character. Only one character is accepted. Default: "

Note:

  • Values containing a separator character must be quoted.
  • Quoted Values containing a quoting character must be escaped with a quoting characters. For example, "" within a quoted value represents ".
  • If the event doesn’t contain the same number of value as the number of keys in the header, the CSV parser will match the first ones.
  • Intergers and Double are automatically casted if possible.

Event:

John,Doe,120,Jefferson St.,Riverside

Rule:

myParsingRule %{data:user:csv("first_name,name,st_nb,st_name,city")}

Result:

{
  "user": {
    "first_name": "John",
    "name": "Doe",
    "st_nb": 120,
    "st_name": "Jefferson St.",
    "city": "Riverside"
  }
}

Other examples:

Raw stringParsing ruleResult
John,Doe%{data::csv("firstname,name")}{“firstname”: “John”, “name”:“Doe”}
"John ""Da Man""",Doe%{data::csv("firstname,name")}{“firstname”: “John "Da Man"”, “name”:“Doe”}
'John ''Da Man''',Doe%{data::csv("firstname,name",",","'")}{“firstname”: “John ‘Da Man’”, “name”:“Doe”}
John|Doe%{data::csv("firstname,name","|")}{“firstname”: “John”, “name”:“Doe”}
value1,value2,value3%{data::csv("key1,key2")}{“key1”: “value1”, “key2”:“value2”}
value1,value2%{data::csv("key1,key2,key3")}{“key1”: “value1”, “key2”:“value2”}
value1,,value3%{data::csv("key1,key2,key3")}{“key1”: “value1”, “key3”:“value3”}
Value1    Value2    Value3 (TSV)%{data::csv("key1,key2,key3","tab")}{“key1”: “value1”, “key2”: “value2”, “key3”:“value3”}

Use data matcher to discard unneeded text

If you have an event where after you have parsed what is needed and know that the text after that point is safe to discard, you can use the data matcher to do so. For the following event example, you can use the data matcher to discard the % at the end.

Event:

Usage: 24.3%

Rule:

MyParsingRule Usage\:\s+%{number:usage}%{data:ignore}

Result:

{
  "usage": 24.3,
  "ignore": "%"
}

ASCII control characters

If your events contain ASCII control characters, they are serialized upon ingestion. These can be handled by explicitly escaping the serialized value within your grok parser.