Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces
Cette page n'est pas encore disponible en français, sa traduction est en cours.
Si vous avez des questions ou des retours sur notre projet de traduction actuel,
n'hésitez pas à nous contacter.
Description
To set the runtime status of the net.ipv4.conf.all.accept_source_route
kernel parameter, run the following command:
$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d
:
net.ipv4.conf.all.accept_source_route = 0
Rationale
Source-routed packets allow the source of the packet to suggest routers
forward the packet along a different path than configured on the router,
which can be used to bypass network security measures. This requirement
applies only to the forwarding of source-routerd traffic, such as when IPv4
forwarding is enabled and the system is functioning as a router.
Accepting source-routed packets in the IPv4 protocol has few legitimate
uses. It should be disabled unless it is absolutely required.
Shell script
The following script can be run on the host to remediate the issue.
#!/bin/bash
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}
' 'kernel' 2>/dev/null | grep -q installed; then
# Comment out any occurrences of net.ipv4.conf.all.accept_source_route from /etc/sysctl.d/*.conf files
for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf; do
# skip systemd-sysctl symlink (/etc/sysctl.d/99-sysctl.conf -> /etc/sysctl.conf)
if [[ "$(readlink -f "$f")" == "/etc/sysctl.conf" ]]; then continue; fi
matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_source_route.*$' $f | uniq )
if ! test -z "$matching_list"; then
while IFS= read -r entry; do
escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
# comment out "net.ipv4.conf.all.accept_source_route" matches to preserve user data
sed -i --follow-symlinks "s/^${escaped_entry}$/# &/g" $f
done <<< "$matching_list"
fi
done
#
# Set sysctl config file which to save the desired value
#
SYSCONFIG_FILE="/etc/sysctl.conf"
sysctl_net_ipv4_conf_all_accept_source_route_value='0'
#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route="$sysctl_net_ipv4_conf_all_accept_source_route_value"
#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
# else, add "net.ipv4.conf.all.accept_source_route = value" to /etc/sysctl.conf
#
# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_source_route")
# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_source_route_value"
# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
fi
printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi
else
>&2 echo 'Remediation is not applicable, nothing was done'
fi
Ansible playbook
The following playbook can be run with Ansible to remediate the issue.
- name: Gather the package facts
package_facts:
manager: auto
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-5
- NIST-800-53-SC-7(a)
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_all_accept_source_route
- name: List /etc/sysctl.d/*.conf files
find:
paths:
- /etc/sysctl.d/
- /run/sysctl.d/
- /usr/local/lib/sysctl.d/
contains: ^[\s]*net.ipv4.conf.all.accept_source_route.*$
patterns: '*.conf'
file_type: any
register: find_sysctl_d
when: '"kernel" in ansible_facts.packages'
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-5
- NIST-800-53-SC-7(a)
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_all_accept_source_route
- name: Comment out any occurrences of net.ipv4.conf.all.accept_source_route from
config files
replace:
path: '{{ item.path }}'
regexp: ^[\s]*net.ipv4.conf.all.accept_source_route
replace: '#net.ipv4.conf.all.accept_source_route'
loop: '{{ find_sysctl_d.files }}'
when: '"kernel" in ansible_facts.packages'
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-5
- NIST-800-53-SC-7(a)
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_source_route_value # promote to variable
set_fact:
sysctl_net_ipv4_conf_all_accept_source_route_value: !!str 0
tags:
- always
- name: Ensure sysctl net.ipv4.conf.all.accept_source_route is set
sysctl:
name: net.ipv4.conf.all.accept_source_route
value: '{{ sysctl_net_ipv4_conf_all_accept_source_route_value }}'
sysctl_file: /etc/sysctl.conf
state: present
reload: true
when: '"kernel" in ansible_facts.packages'
tags:
- NIST-800-171-3.1.20
- NIST-800-53-CM-6(a)
- NIST-800-53-CM-7(a)
- NIST-800-53-CM-7(b)
- NIST-800-53-SC-5
- NIST-800-53-SC-7(a)
- disable_strategy
- low_complexity
- medium_disruption
- medium_severity
- reboot_required
- sysctl_net_ipv4_conf_all_accept_source_route