Set SSH Client Alive Count Max

Cette page n'est pas encore disponible en français, sa traduction est en cours.
Si vous avez des questions ou des retours sur notre projet de traduction actuel, n'hésitez pas à nous contacter.

Description

The SSH server sends at most ClientAliveCountMax messages during a SSH session and waits for a response from the SSH client. The option ClientAliveInterval configures timeout after each ClientAliveCountMax message. If the SSH server does not receive a response from the client, then the connection is considered unresponsive and terminated. For SSH earlier than v8.2, a ClientAliveCountMax value of 0 causes a timeout precisely when the ClientAliveInterval is set. Starting with v8.2, a value of 0 disables the timeout functionality completely. If the option is set to a number greater than 0, then the session will be disconnected after ClientAliveInterval * ClientAliveCountMax seconds without receiving a keep alive message.

Rationale

This ensures a user login will be terminated as soon as the ClientAliveInterval is reached.

Remediation

Shell script

The following script can be run on the host to remediate the issue.

#!/bin/bash

# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}' 'linux-base' 2>/dev/null | grep -q '^installed$'; then

var_sshd_set_keepalive='3'


mkdir -p /etc/ssh/sshd_config.d
touch /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
chmod 0600 /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf

LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config"
LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config.d"/*.conf
if [ -e "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
else
    touch "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"

cp "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf" "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"
# Insert at the beginning of the file
printf '%s\n' "ClientAliveCountMax $var_sshd_set_keepalive" > "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
cat "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak" >> "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf"
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.d/00-complianceascode-hardening.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Ansible playbook

The following playbook can be run with Ansible to remediate the issue.

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.5.6
  - DISA-STIG-UBTU-20-010036
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2
  - PCI-DSSv4-8.2.8
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_keepalive
- name: XCCDF Value var_sshd_set_keepalive # promote to variable
  set_fact:
    var_sshd_set_keepalive: !!str 3
  tags:
    - always

- name: Set SSH Client Alive Count Max
  block:

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)(?i)^\s*{{ "ClientAliveCountMax"| regex_escape }}\s+
      state: absent

  - name: Check if /etc/ssh/sshd_config.d exists
    stat:
      path: /etc/ssh/sshd_config.d
    register: _etc_ssh_sshd_config_d_exists

  - name: Check if the parameter ClientAliveCountMax is present in /etc/ssh/sshd_config.d
    find:
      paths: /etc/ssh/sshd_config.d
      recurse: 'yes'
      follow: 'no'
      contains: (?i)^\s*{{ "ClientAliveCountMax"| regex_escape }}\s+
    register: _etc_ssh_sshd_config_d_has_parameter
    when: _etc_ssh_sshd_config_d_exists.stat.isdir is defined and _etc_ssh_sshd_config_d_exists.stat.isdir

  - name: Remove parameter from files in /etc/ssh/sshd_config.d
    lineinfile:
      path: '{{ item.path }}'
      create: false
      regexp: (?i)(?i)^\s*{{ "ClientAliveCountMax"| regex_escape }}\s+
      state: absent
    with_items: '{{ _etc_ssh_sshd_config_d_has_parameter.files }}'
    when: _etc_ssh_sshd_config_d_has_parameter.matched

  - name: Insert correct line to /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
    lineinfile:
      path: /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
      create: true
      regexp: (?i)(?i)^\s*{{ "ClientAliveCountMax"| regex_escape }}\s+
      line: ClientAliveCountMax {{ var_sshd_set_keepalive }}
      state: present
      insertbefore: BOF
      validate: /usr/sbin/sshd -t -f %s
  when: '"linux-base" in ansible_facts.packages'
  tags:
  - CJIS-5.5.6
  - DISA-STIG-UBTU-20-010036
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2
  - PCI-DSSv4-8.2.8
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_keepalive

- name: Set SSH Client Alive Count Max - set file mode for /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
  ansible.builtin.file:
    path: /etc/ssh/sshd_config.d/00-complianceascode-hardening.conf
    mode: '0600'
  when: '"linux-base" in ansible_facts.packages'
  tags:
  - CJIS-5.5.6
  - DISA-STIG-UBTU-20-010036
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2
  - PCI-DSSv4-8.2.8
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_keepalive