Overview

ASM security signals are created when Datadog detects a threat based on a detection rule. View, search, filter, and investigate security signals in the Signals Explorer, or configure Notification Rules to send signals to third-party tools.

Signals Explorer columns

The Signals Explorer displays the following columns.

Severity

There are five severity states: Info, Low, Medium, High, and Critical. High and Critical indicate a major impact to service availability or active compromise.

Title

The name of the signal. Titles might update when new data is correlated, altering the assessed impact of the attack.

Service/Env

The service and environment identified in the attack. Hover over the service name to link to the service page and code repo, and to see who is on-call for the service.

Entities

The attackers and the victims of an attack. Attackers are identified by IP addresses. Victims are identified as authenticated users. Hover over the IP list and then click an IP to see details such as Threat Intelligence and Security Activity.

Triage State

You can assign a responder and set a triage state for the signal. Available states are Open, Under Review, and Archived.

Creation Date

The date when the signal was first created. Signals are sorted by date by default.

Filter security signals

To filter the security signals in the Signals Explorer, use the search query @workflow.triage.state:<status>, where <status> is the state you want to filter on (open, under_review, or archived). You can also use the Signal State facet on the facet panel.

Triage a signal

You can triage a signal by assigning it to a user for further investigation. The assigned user can then track their review by updating the signal’s status.

1. On the Signals Explorer page, click the user profile icon in the Triage State column.
2. Select a user to assign the signal.
3. To update the status of the security signal, click the triage status dropdown menu and select a status. The default status is Open.
   • Open: The signal has not yet been resolved.
   • Under Review: The signal is actively being investigated. From the Under Review state, you can move the signal to Archived or Open as needed.
   • Archived: The detection that caused the signal has been resolved. From the Archived state, you can move the signal back to Open if it’s within 30 days of when the signal was originally detected.

Note: To modify security signals, you must have the security_monitoring_signals_write permission. See Role Based Access Control for more information about Datadog’s default roles and granular role-based access control permissions available for Application Security Management.

Declare an incident

Use Incident Management to create an incident for a security signal.

Declare an incident if:

• An issue is or might be impacting customers.
• You believe an issue (even if it’s internal) needs to be addressed as an emergency.

If you don’t know whether you should declare an incident, notify other users and increase severity appropriately.

1. On the Signals Explorer page, select a security signal to open its details panel.
2. On the signal panel, click Declare Incident or select the dropdown arrow and select Add to an existing incident.
3. When you declare a new incident, in the Declare Incident settings, configure the incident by specifying details such as the severity level and incident commander.
   1. Estimate impact. Severity levels go from SEV-1 (critical) to SEV-5 (minor impact). When in doubt, always choose the higher severity.
4. Click Declare Incident.

Run a workflow

Use Workflow Automation to manually trigger a workflow for a security signal.

1. Make sure the workflow you want to run has a security trigger.
2. On the Signals Explorer page, open a security signal.
3. In the Respond section, click Run Workflow.
4. In Run a workflow, select the workflow you want to run or click New Workflow.
   • Depending on the workflow you select, you might be required to enter additional input parameters.
   • If you selected New Workflow, Run a Security Workflow opens. To learn more about workflows, see Workflow Automation.
5. Click Run.

Review and remediate

1. On the Signals Explorer page, open a security signal.
2. In the signal details, view each of the sections, such as What Happened, Activity Summary, and Detection Rule.
3. Review the Next Steps and take action:
   • Click Block all Attacking IPs (by specific duration or permanently).
   • Click Automated Attacker Blocking (based on detection rules). This setting requires the Application Security Management Protect Write permission.
   • Click Block with Edge WAF.

Bulk actions

When you select one or more signals, you can use Bulk Actions to perform the following.

Set state

Set the triage state to Open, Under Review, or Archived.

Assign the signal to users

Select Assign selection and then select the user(s) to assign to the signal.

Select Remove all assignments to reset the signal assignment to none.

Case management

Datadog Case Management offers a centralized place to triage, track, and remediate issues detected by Datadog and third-party integrations.

1. On the Signals Explorer page, select a security signal.
2. In Bulk Actions, select Create a case.
3. Select Create a case or Add to an existing case to add the signal to an existing case.
4. Enter a title and optional description.
5. Click Create Case.

When you click Create Case, you are directed to Case Management and the project you selected.

Saved views

You can save different configurations of the Signals Explorer as views. For example, you could filter the explorer to show all unassigned signals and then save that as a view.

When a configuration is saved as a view, you and your teammates can use it later.

A view contains the explorer’s current selections for:

• Time and query
• Displayed columns and sorting
• Analytics aggregation settings
• Timeline visibility
• Displayed facets
• Aggregate by detection rule

1. To save a view, configure the explorer to display the view you want and then click Save.
2. Enter a name for the view, and then select the teams you want to share the view with.
3. Click Save.

To see all of the saved views, click Views next to the Signals Explorer page title.

Further Reading

Documentation, liens et articles supplémentaires utiles:

Explore ASM threat detection OOTB rulesDOCUMENTATION Configure custom ASM threat detection rulesDOCUMENTATION ASM threat intelligenceDOCUMENTATION