Zeek

Supported OS Linux Mac OS

Intégration1.0.0
Cette page n'est pas encore disponible en français, sa traduction est en cours.
Si vous avez des questions ou des retours sur notre projet de traduction actuel, n'hésitez pas à nous contacter.

Overview

Zeek is a platform for network security monitoring. It interprets what it sees and creates compact, high-fidelity transaction logs, and file content. It can create fully customized output, suitable for manual review on disk or in a more analyst-friendly tool like a security and information event management (SIEM) system.

This integration ingests the following logs:

  • Connection logs
  • DNS and DHCP logs
  • Network Protocols
  • Files
  • Detections
  • Miscellaneous event types

Visualize detailed insights into network connections, DNS and DHCP activity, detailed network protocol analysis, file analysis and certificates, security detection and observation, compliance monitoring through the out-of-the-box dashboards.

Setup

Installation

To install the Zeek integration, run the following Agent installation command and the steps below. For more information, see the Integration Management documentation.

Note: This step is not necessary for Agent version >= 7.52.0.

Linux command

sudo -u dd-agent -- datadog-agent integration install datadog-zeek==1.0.0

Opensource Zeek

  1. Install the Agent on your Zeek machine.
  2. Install Corelight Zeek plugin for JSON logging.
    /opt/zeek/bin/zkg install corelight/json-streaming-logs
    
  3. Load ZKG packages.
    echo -e "\n# Load ZKG packages\n@load packages" >> /opt/zeek/share/zeek/site/local.zeek
    
  4. Restart Zeek.
    /opt/zeek/bin/zeekctl install
    
    /opt/zeek/bin/zeekctl restart
    

Corelight Zeek

Configuration

Opensource Zeek

  1. Collecting logs is disabled by default in the Datadog Agent. Enable it in datadog.yaml:

    logs_enabled: true
    
  2. Add this configuration block to your zeek.d/conf.yaml file to start collecting your Zeek logs.

    See the sample zeek.d/conf.yaml for available configuration options.

     logs:
     - type: file
       path: /opt/zeek/logs/current/*.log
       exclude_paths:
         - /opt/zeek/logs/current/*.*.log
       service: zeek
       source: zeek
    

    Note: Include the log file’s paths within the exclude_paths parameter to prevent the ingestion of unsupported or undesired log files during the monitoring process.

     # Example of excluded paths
     exclude_paths:
       - /opt/zeek/logs/current/ntlm.log
       - /opt/zeek/logs/current/radius.log
       - /opt/zeek/logs/current/rfb.log
    
  3. Restart the Agent.

Corelight Zeek

  1. Collecting logs is disabled by default in the Datadog Agent. Enable it in datadog.yaml:

    logs_enabled: true
    
  2. Add this configuration block to your zeek.d/conf.yaml file to start collecting your logs.

    logs:
    - type: tcp
      port: <PORT>
      service: corelight
      source: zeek
    
  3. Restart the Agent.

  4. Configuring Syslog Message Forwarding from corelight

    1. Open a web browser and navigate to the IP address or hostname of your Corelight sensor.
    2. Log in with your administrative credentials.
    3. Navigate to the Zeek Configuration Page. The exact path may vary depending on your sensor’s firmware version.
    4. Look for options related to “Zeek” or “Logging”. Common paths includes:
    • Settings > Logging
    • Configuration > Zeek > Logging
    1. Locate the option to enable syslog output for Zeek logs and select the checkbox or toggle to activate.
    2. Specify Syslog Server Details. Provide the following information:
      • Syslog server IP address: The destination where you want to send the Zeek logs.
      • Syslog port: The port on which the syslog server is listening (typically 514).
      • Facility: The syslog facility to use.
      • Severity level: The minimum severity of events to send.
    3. Click the Save or Apply button to commit the configuration changes.

Validation

Run the Agent’s status subcommand and look for zeek under the Checks section.

Data Collected

Logs

The Zeek integration collects following log-types.

FormatEvent Types
Opensource Zeek - JSON Formatconn, dhcp, dns, ftp, http, ntp, rdp, smtp, snmp, socks, ssh, ssl, syslog, tunnel, files, pe, intel, notice, signatures, traceroute, known-certs, known-modbus, known-services, known-hosts, software, x509, dpd, weird, captureloss, reporter, ldap, ldap-search, smb-files, smb-mappings
Corelight Zeek - Syslog RFC 3164 (Legacy) Formatconn, dhcp, dns, ftp, http, ntp, rdp, smtp, snmp, socks, ssh, ssl, syslog, tunnel, files, pe, intel, notice, signatures, traceroute, known-certs, known-modbus, known-services, known-hosts, software, x509, dpd, weird, captureloss, reporter, ldap, ldap-search, smb-files, smb-mappings, conn-long, conn-red, encrypted-dns, generic-dns-tunnels, smtp-links, suricata-corelight

Metrics

The Zeek integration does not include any metrics.

Events

The Zeek integration does not include any events.

Service Checks

The Zeek integration does not include any service checks.

Troubleshooting

Opensource Zeek:

If you see a Permission denied error while monitoring the log files, give the dd-agent user read permission on them.

sudo chown -R dd-agent:dd-agent /opt/zeek/current/

Corelight Zeek:

Permission denied while port binding:

If you see a Permission denied error while port binding in the Agent logs, see the following instructions:

  1. Binding to a port number under 1024 requires elevated permissions. Grant access to the port using the setcap command:

    sudo setcap CAP_NET_BIND_SERVICE=+ep /opt/datadog-agent/bin/agent/agent
    
  2. Verify the setup is correct by running the getcap command:

    sudo getcap /opt/datadog-agent/bin/agent/agent
    

    With the expected output:

    /opt/datadog-agent/bin/agent/agent = cap_net_bind_service+ep
    

    Note: Re-run this setcap command every time you upgrade the Agent.

  3. Restart the Agent.

Data is not being collected:

Make sure that traffic is bypassed from the configured port if the firewall is enabled.

Port already in use:

If you see the Port <PORT-NO> Already in Use error, see the following instructions. The example below is for PORT-NO = 514:

On systems using Syslog, if the Agent listens for Zeek logs on port 514, the following error can appear in the Agent logs: Can't start UDP forwarder on port 514: listen udp :514: bind: address already in use.

This error occurs because by default, Syslog listens on port 514. To resolve this error, take one of the following steps:

  • Disable Syslog
  • Configure the Agent to listen on a different, available port

For any further assistance, contact Datadog support.