aws_ec2_instance

account_id

Type: STRING

ami_launch_index

Type: INT32
Provider name: AmiLaunchIndex
Description: The AMI launch index, which can be used to find this instance in the launch group.

architecture

Type: STRING
Provider name: Architecture
Description: The architecture of the image.

block_device_mappings

Type: UNORDERED_LIST_STRUCT
Provider name: BlockDeviceMappings
Description: Any block device mapping entries for the instance.

• device_name
  Type: STRING
  Provider name: DeviceName
  Description: The device name (for example, /dev/sdh or xvdh).
  
• ebs
  Type: STRUCT
  Provider name: Ebs
  Description: Parameters used to automatically set up EBS volumes when the instance is launched.
  
  • associated_resource
    Type: STRING
    Provider name: AssociatedResource
    Description: The ARN of the Amazon ECS or Fargate task to which the volume is attached.
    
  • attach_time
    Type: TIMESTAMP
    Provider name: AttachTime
    Description: The time stamp when the attachment initiated.
    
  • delete_on_termination
    Type: BOOLEAN
    Provider name: DeleteOnTermination
    Description: Indicates whether the volume is deleted on instance termination.
    
  • status
    Type: STRING
    Provider name: Status
    Description: The attachment state.
    
  • volume_id
    Type: STRING
    Provider name: VolumeId
    Description: The ID of the EBS volume.
    
  • volume_owner_id
    Type: STRING
    Provider name: VolumeOwnerId
    Description: The ID of the Amazon Web Services account that owns the volume. This parameter is returned only for volumes that are attached to Fargate tasks.
    

boot_mode

Type: STRING
Provider name: BootMode
Description: The boot mode that was specified by the AMI. If the value is uefi-preferred, the AMI supports both UEFI and Legacy BIOS. The currentInstanceBootMode parameter is the boot mode that is used to boot the instance at launch or start. The operating system contained in the AMI must be configured to support the specified boot mode. For more information, see Boot modes in the Amazon EC2 User Guide.

capacity_reservation_id

Type: STRING
Provider name: CapacityReservationId
Description: The ID of the Capacity Reservation.

capacity_reservation_specification

Type: STRUCT
Provider name: CapacityReservationSpecification
Description: Information about the Capacity Reservation targeting option.

• capacity_reservation_preference
  Type: STRING
  Provider name: CapacityReservationPreference
  Description: Describes the instance’s Capacity Reservation preferences. Possible preferences include:
  • open - The instance can run in any open Capacity Reservation that has matching attributes (instance type, platform, Availability Zone).
  • none - The instance avoids running in a Capacity Reservation even if one is available. The instance runs in On-Demand capacity.
• capacity_reservation_target
  Type: STRUCT
  Provider name: CapacityReservationTarget
  Description: Information about the targeted Capacity Reservation or Capacity Reservation group.
  
  • capacity_reservation_id
    Type: STRING
    Provider name: CapacityReservationId
    Description: The ID of the targeted Capacity Reservation.
    
  • capacity_reservation_resource_group_arn
    Type: STRING
    Provider name: CapacityReservationResourceGroupArn
    Description: The ARN of the targeted Capacity Reservation group.
    

client_token

Type: STRING
Provider name: ClientToken
Description: The idempotency token you provided when you launched the instance, if applicable.

cpu_options

Type: STRUCT
Provider name: CpuOptions
Description: The CPU options for the instance.

• amd_sev_snp
  Type: STRING
  Provider name: AmdSevSnp
  Description: Indicates whether the instance is enabled for AMD SEV-SNP. For more information, see AMD SEV-SNP.
  
• core_count
  Type: INT32
  Provider name: CoreCount
  Description: The number of CPU cores for the instance.
  
• threads_per_core
  Type: INT32
  Provider name: ThreadsPerCore
  Description: The number of threads per CPU core.
  

current_instance_boot_mode

Type: STRING
Provider name: CurrentInstanceBootMode
Description: The boot mode that is used to boot the instance at launch or start. For more information, see Boot modes in the Amazon EC2 User Guide.

ebs_optimized

Type: BOOLEAN
Provider name: EbsOptimized
Description: Indicates whether the instance is optimized for Amazon EBS I/O. This optimization provides dedicated throughput to Amazon EBS and an optimized configuration stack to provide optimal I/O performance. This optimization isn’t available with all instance types. Additional usage charges apply when using an EBS Optimized instance.

elastic_gpu_associations

Type: UNORDERED_LIST_STRUCT
Provider name: ElasticGpuAssociations
Description: Deprecated. Amazon Elastic Graphics reached end of life on January 8, 2024. For workloads that require graphics acceleration, we recommend that you use Amazon EC2 G4ad, G4dn, or G5 instances.

• elastic_gpu_association_id
  Type: STRING
  Provider name: ElasticGpuAssociationId
  Description: The ID of the association.
  
• elastic_gpu_association_state
  Type: STRING
  Provider name: ElasticGpuAssociationState
  Description: The state of the association between the instance and the Elastic Graphics accelerator.
  
• elastic_gpu_association_time
  Type: STRING
  Provider name: ElasticGpuAssociationTime
  Description: The time the Elastic Graphics accelerator was associated with the instance.
  
• elastic_gpu_id
  Type: STRING
  Provider name: ElasticGpuId
  Description: The ID of the Elastic Graphics accelerator.
  

elastic_inference_accelerator_associations

Type: UNORDERED_LIST_STRUCT
Provider name: ElasticInferenceAcceleratorAssociations
Description: The elastic inference accelerator associated with the instance.

• elastic_inference_accelerator_arn
  Type: STRING
  Provider name: ElasticInferenceAcceleratorArn
  Description: The Amazon Resource Name (ARN) of the elastic inference accelerator.
  
• elastic_inference_accelerator_association_id
  Type: STRING
  Provider name: ElasticInferenceAcceleratorAssociationId
  Description: The ID of the association.
  
• elastic_inference_accelerator_association_state
  Type: STRING
  Provider name: ElasticInferenceAcceleratorAssociationState
  Description: The state of the elastic inference accelerator.
  
• elastic_inference_accelerator_association_time
  Type: TIMESTAMP
  Provider name: ElasticInferenceAcceleratorAssociationTime
  Description: The time at which the elastic inference accelerator is associated with an instance.
  

ena_support

Type: BOOLEAN
Provider name: EnaSupport
Description: Specifies whether enhanced networking with ENA is enabled.

enclave_options

Type: STRUCT
Provider name: EnclaveOptions
Description: Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves.

• enabled
  Type: BOOLEAN
  Provider name: Enabled
  Description: If this parameter is set to true, the instance is enabled for Amazon Web Services Nitro Enclaves; otherwise, it is not enabled for Amazon Web Services Nitro Enclaves.
  

hibernation_options

Type: STRUCT
Provider name: HibernationOptions
Description: Indicates whether the instance is enabled for hibernation.

• configured
  Type: BOOLEAN
  Provider name: Configured
  Description: If true, your instance is enabled for hibernation; otherwise, it is not enabled for hibernation.
  

hypervisor

Type: STRING
Provider name: Hypervisor
Description: The hypervisor type of the instance. The value xen is used for both Xen and Nitro hypervisors.

iam_instance_profile

Type: STRUCT
Provider name: IamInstanceProfile
Description: The IAM instance profile associated with the instance, if applicable.

• arn
  Type: STRING
  Provider name: Arn
  Description: The Amazon Resource Name (ARN) of the instance profile.
  
• id
  Type: STRING
  Provider name: Id
  Description: The ID of the instance profile.
  

image_id

Type: STRING
Provider name: ImageId
Description: The ID of the AMI used to launch the instance.

instance_arn

Type: STRING

instance_id

Type: STRING
Provider name: InstanceId
Description: The ID of the instance.

instance_lifecycle

Type: STRING
Provider name: InstanceLifecycle
Description: Indicates whether this is a Spot Instance or a Scheduled Instance.

instance_type

Type: STRING
Provider name: InstanceType
Description: The instance type.

ipv6_address

Type: STRING
Provider name: Ipv6Address
Description: The IPv6 address assigned to the instance.

kernel_id

Type: STRING
Provider name: KernelId
Description: The kernel associated with this instance, if applicable.

key_name

Type: STRING
Provider name: KeyName
Description: The name of the key pair, if this instance was launched with an associated key pair.

launch_template_data

Type: STRUCT
Provider name: LaunchTemplateData
Description: The instance data.

• block_device_mappings
  Type: UNORDERED_LIST_STRUCT
  Provider name: BlockDeviceMappings
  Description: The block device mappings.
  
  • device_name
    Type: STRING
    Provider name: DeviceName
    Description: The device name.
    
  • ebs
    Type: STRUCT
    Provider name: Ebs
    Description: Information about the block device for an EBS volume.
    
    • delete_on_termination
      Type: BOOLEAN
      Provider name: DeleteOnTermination
      Description: Indicates whether the EBS volume is deleted on instance termination.
      
    • encrypted
      Type: BOOLEAN
      Provider name: Encrypted
      Description: Indicates whether the EBS volume is encrypted.
      
    • iops
      Type: INT32
      Provider name: Iops
      Description: The number of I/O operations per second (IOPS) that the volume supports.
      
    • kms_key_id
      Type: STRING
      Provider name: KmsKeyId
      Description: The ARN of the Key Management Service (KMS) CMK used for encryption.
      
    • snapshot_id
      Type: STRING
      Provider name: SnapshotId
      Description: The ID of the snapshot.
      
    • throughput
      Type: INT32
      Provider name: Throughput
      Description: The throughput that the volume supports, in MiB/s.
      
    • volume_size
      Type: INT32
      Provider name: VolumeSize
      Description: The size of the volume, in GiB.
      
    • volume_type
      Type: STRING
      Provider name: VolumeType
      Description: The volume type.
      
  • no_device
    Type: STRING
    Provider name: NoDevice
    Description: To omit the device from the block device mapping, specify an empty string.
    
  • virtual_name
    Type: STRING
    Provider name: VirtualName
    Description: The virtual device name (ephemeralN).
    
• capacity_reservation_specification
  Type: STRUCT
  Provider name: CapacityReservationSpecification
  Description: Information about the Capacity Reservation targeting option.
  
  • capacity_reservation_preference
    Type: STRING
    Provider name: CapacityReservationPreference
    Description: Indicates the instance’s Capacity Reservation preferences. Possible preferences include:
    • open - The instance can run in any open Capacity Reservation that has matching attributes (instance type, platform, Availability Zone).
    • none - The instance avoids running in a Capacity Reservation even if one is available. The instance runs in On-Demand capacity.
  • capacity_reservation_target
    Type: STRUCT
    Provider name: CapacityReservationTarget
    Description: Information about the target Capacity Reservation or Capacity Reservation group.
    
    • capacity_reservation_id
      Type: STRING
      Provider name: CapacityReservationId
      Description: The ID of the targeted Capacity Reservation.
      
    • capacity_reservation_resource_group_arn
      Type: STRING
      Provider name: CapacityReservationResourceGroupArn
      Description: The ARN of the targeted Capacity Reservation group.
      
• cpu_options
  Type: STRUCT
  Provider name: CpuOptions
  Description: The CPU options for the instance. For more information, see Optimize CPU options in the Amazon EC2 User Guide.
  
  • amd_sev_snp
    Type: STRING
    Provider name: AmdSevSnp
    Description: Indicates whether the instance is enabled for AMD SEV-SNP. For more information, see AMD SEV-SNP.
    
  • core_count
    Type: INT32
    Provider name: CoreCount
    Description: The number of CPU cores for the instance.
    
  • threads_per_core
    Type: INT32
    Provider name: ThreadsPerCore
    Description: The number of threads per CPU core.
    
• credit_specification
  Type: STRUCT
  Provider name: CreditSpecification
  Description: The credit option for CPU usage of the instance.
  
  • cpu_credits
    Type: STRING
    Provider name: CpuCredits
    Description: The credit option for CPU usage of a T instance. Valid values: standard | unlimited
    
• disable_api_stop
  Type: BOOLEAN
  Provider name: DisableApiStop
  Description: Indicates whether the instance is enabled for stop protection. For more information, see Enable stop protection for your instance in the Amazon EC2 User Guide.
  
• disable_api_termination
  Type: BOOLEAN
  Provider name: DisableApiTermination
  Description: If set to true, indicates that the instance cannot be terminated using the Amazon EC2 console, command line tool, or API.
  
• ebs_optimized
  Type: BOOLEAN
  Provider name: EbsOptimized
  Description: Indicates whether the instance is optimized for Amazon EBS I/O.
  
• elastic_gpu_specifications
  Type: UNORDERED_LIST_STRUCT
  Provider name: ElasticGpuSpecifications
  Description: Deprecated. Amazon Elastic Graphics reached end of life on January 8, 2024. For workloads that require graphics acceleration, we recommend that you use Amazon EC2 G4ad, G4dn, or G5 instances.
  
  • type
    Type: STRING
    Provider name: Type
    Description: Deprecated. Amazon Elastic Graphics reached end of life on January 8, 2024. For workloads that require graphics acceleration, we recommend that you use Amazon EC2 G4ad, G4dn, or G5 instances.
    
• elastic_inference_accelerators
  Type: UNORDERED_LIST_STRUCT
  Provider name: ElasticInferenceAccelerators
  Description: An elastic inference accelerator to associate with the instance. Elastic inference accelerators are a resource you can attach to your Amazon EC2 instances to accelerate your Deep Learning (DL) inference workloads. You cannot specify accelerators from different generations in the same request. Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and will help current customers migrate their workloads to options that offer better price and performance. After April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past 30-day period are considered current customers and will be able to continue using the service.
  
  • count
    Type: INT32
    Provider name: Count
    Description: The number of elastic inference accelerators to attach to the instance.
    Default: 1
  • type
    Type: STRING
    Provider name: Type
    Description: The type of elastic inference accelerator. The possible values are eia1.medium, eia1.large, and eia1.xlarge.
    
• enclave_options
  Type: STRUCT
  Provider name: EnclaveOptions
  Description: Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves.
  
  • enabled
    Type: BOOLEAN
    Provider name: Enabled
    Description: If this parameter is set to true, the instance is enabled for Amazon Web Services Nitro Enclaves; otherwise, it is not enabled for Amazon Web Services Nitro Enclaves.
    
• hibernation_options
  Type: STRUCT
  Provider name: HibernationOptions
  Description: Indicates whether an instance is configured for hibernation. For more information, see Hibernate your Amazon EC2 instance in the Amazon EC2 User Guide.
  
  • configured
    Type: BOOLEAN
    Provider name: Configured
    Description: If this parameter is set to true, the instance is enabled for hibernation; otherwise, it is not enabled for hibernation.
    
• iam_instance_profile
  Type: STRUCT
  Provider name: IamInstanceProfile
  Description: The IAM instance profile.
  
  • arn
    Type: STRING
    Provider name: Arn
    Description: The Amazon Resource Name (ARN) of the instance profile.
    
  • name
    Type: STRING
    Provider name: Name
    Description: The name of the instance profile.
    
• image_id
  Type: STRING
  Provider name: ImageId
  Description: The ID of the AMI or a Systems Manager parameter. The Systems Manager parameter will resolve to the ID of the AMI at instance launch. The value depends on what you specified in the request. The possible values are:
  • If an AMI ID was specified in the request, then this is the AMI ID.
  • If a Systems Manager parameter was specified in the request, and ResolveAlias was configured as true, then this is the AMI ID that the parameter is mapped to in the Parameter Store.
  • If a Systems Manager parameter was specified in the request, and ResolveAlias was configured as false, then this is the parameter value.
  For more information, see Use a Systems Manager parameter instead of an AMI ID in the Amazon EC2 User Guide.
  
• instance_initiated_shutdown_behavior
  Type: STRING
  Provider name: InstanceInitiatedShutdownBehavior
  Description: Indicates whether an instance stops or terminates when you initiate shutdown from the instance (using the operating system command for system shutdown).
  
• instance_market_options
  Type: STRUCT
  Provider name: InstanceMarketOptions
  Description: The market (purchasing) option for the instances.
  
  • market_type
    Type: STRING
    Provider name: MarketType
    Description: The market type.
    
  • spot_options
    Type: STRUCT
    Provider name: SpotOptions
    Description: The options for Spot Instances.
    
    • block_duration_minutes
      Type: INT32
      Provider name: BlockDurationMinutes
      Description: The required duration for the Spot Instances (also known as Spot blocks), in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, or 360).
      
    • instance_interruption_behavior
      Type: STRING
      Provider name: InstanceInterruptionBehavior
      Description: The behavior when a Spot Instance is interrupted.
      
    • max_price
      Type: STRING
      Provider name: MaxPrice
      Description: The maximum hourly price you’re willing to pay for the Spot Instances. We do not recommend using this parameter because it can lead to increased interruptions. If you do not specify this parameter, you will pay the current Spot price. If you specify a maximum price, your Spot Instances will be interrupted more frequently than if you do not specify this parameter.
      
    • spot_instance_type
      Type: STRING
      Provider name: SpotInstanceType
      Description: The Spot Instance request type.
      
    • valid_until
      Type: TIMESTAMP
      Provider name: ValidUntil
      Description: The end date of the request. For a one-time request, the request remains active until all instances launch, the request is canceled, or this date is reached. If the request is persistent, it remains active until it is canceled or this date and time is reached.
      
• instance_requirements
  Type: STRUCT
  Provider name: InstanceRequirements
  Description: The attributes for the instance types. When you specify instance attributes, Amazon EC2 will identify instance types with these attributes. If you specify InstanceRequirements, you can’t specify InstanceTypes.
  
  • accelerator_count
    Type: STRUCT
    Provider name: AcceleratorCount
    Description: The minimum and maximum number of accelerators (GPUs, FPGAs, or Amazon Web Services Inferentia chips) on an instance. To exclude accelerator-enabled instance types, set Max to 0.
    Default: No minimum or maximum limits
    • max
      Type: INT32
      Provider name: Max
      Description: The maximum number of accelerators. If this parameter is not specified, there is no maximum limit.
      
    • min
      Type: INT32
      Provider name: Min
      Description: The minimum number of accelerators. If this parameter is not specified, there is no minimum limit.
      
  • accelerator_manufacturers
    Type: UNORDERED_LIST_STRING
    Provider name: AcceleratorManufacturers
    Description: Indicates whether instance types must have accelerators by specific manufacturers.
    • For instance types with Amazon Web Services devices, specify amazon-web-services.
    • For instance types with AMD devices, specify amd.
    • For instance types with Habana devices, specify habana.
    • For instance types with NVIDIA devices, specify nvidia.
    • For instance types with Xilinx devices, specify xilinx.
    Default: Any manufacturer
  • accelerator_names
    Type: UNORDERED_LIST_STRING
    Provider name: AcceleratorNames
    Description: The accelerators that must be on the instance type.
    • For instance types with NVIDIA A10G GPUs, specify a10g.
    • For instance types with NVIDIA A100 GPUs, specify a100.
    • For instance types with NVIDIA H100 GPUs, specify h100.
    • For instance types with Amazon Web Services Inferentia chips, specify inferentia.
    • For instance types with NVIDIA GRID K520 GPUs, specify k520.
    • For instance types with NVIDIA K80 GPUs, specify k80.
    • For instance types with NVIDIA M60 GPUs, specify m60.
    • For instance types with AMD Radeon Pro V520 GPUs, specify radeon-pro-v520.
    • For instance types with NVIDIA T4 GPUs, specify t4.
    • For instance types with NVIDIA T4G GPUs, specify t4g.
    • For instance types with Xilinx VU9P FPGAs, specify vu9p.
    • For instance types with NVIDIA V100 GPUs, specify v100.
    Default: Any accelerator
  • accelerator_total_memory_mib
    Type: STRUCT
    Provider name: AcceleratorTotalMemoryMiB
    Description: The minimum and maximum amount of total accelerator memory, in MiB.
    Default: No minimum or maximum limits
    • max
      Type: INT32
      Provider name: Max
      Description: The maximum amount of accelerator memory, in MiB. If this parameter is not specified, there is no maximum limit.
      
    • min
      Type: INT32
      Provider name: Min
      Description: The minimum amount of accelerator memory, in MiB. If this parameter is not specified, there is no minimum limit.
      
  • accelerator_types
    Type: UNORDERED_LIST_STRING
    Provider name: AcceleratorTypes
    Description: The accelerator types that must be on the instance type.
    • For instance types with GPU accelerators, specify gpu.
    • For instance types with FPGA accelerators, specify fpga.
    • For instance types with inference accelerators, specify inference.
    Default: Any accelerator type
  • allowed_instance_types
    Type: UNORDERED_LIST_STRING
    Provider name: AllowedInstanceTypes
    Description: The instance types to apply your specified attributes against. All other instance types are ignored, even if they match your specified attributes. You can use strings with one or more wild cards, represented by an asterisk (), to allow an instance type, size, or generation. The following are examples: m5.8xlarge, c5., m5a., r*, 3. For example, if you specify c5*,Amazon EC2 will allow the entire C5 instance family, which includes all C5a and C5n instance types. If you specify m5a.*, Amazon EC2 will allow all the M5a instance types, but not the M5n instance types. If you specify AllowedInstanceTypes, you can’t specify ExcludedInstanceTypes.
    Default: All instance types
  • bare_metal
    Type: STRING
    Provider name: BareMetal
    Description: Indicates whether bare metal instance types must be included, excluded, or required.
    • To include bare metal instance types, specify included.
    • To require only bare metal instance types, specify required.
    • To exclude bare metal instance types, specify excluded.
    Default: excluded
  • baseline_ebs_bandwidth_mbps
    Type: STRUCT
    Provider name: BaselineEbsBandwidthMbps
    Description: The minimum and maximum baseline bandwidth to Amazon EBS, in Mbps. For more information, see Amazon EBS–optimized instances in the Amazon EC2 User Guide.
    Default: No minimum or maximum limits
    • max
      Type: INT32
      Provider name: Max
      Description: The maximum baseline bandwidth, in Mbps. If this parameter is not specified, there is no maximum limit.
      
    • min
      Type: INT32
      Provider name: Min
      Description: The minimum baseline bandwidth, in Mbps. If this parameter is not specified, there is no minimum limit.
      
  • burstable_performance
    Type: STRING
    Provider name: BurstablePerformance
    Description: Indicates whether burstable performance T instance types are included, excluded, or required. For more information, see Burstable performance instances.
    • To include burstable performance instance types, specify included.
    • To require only burstable performance instance types, specify required.
    • To exclude burstable performance instance types, specify excluded.
    Default: excluded
  • cpu_manufacturers
    Type: UNORDERED_LIST_STRING
    Provider name: CpuManufacturers
    Description: The CPU manufacturers to include.
    • For instance types with Intel CPUs, specify intel.
    • For instance types with AMD CPUs, specify amd.
    • For instance types with Amazon Web Services CPUs, specify amazon-web-services.
    Don’t confuse the CPU manufacturer with the CPU architecture. Instances will be launched with a compatible CPU architecture based on the Amazon Machine Image (AMI) that you specify in your launch template.
    Default: Any manufacturer
  • excluded_instance_types
    Type: UNORDERED_LIST_STRING
    Provider name: ExcludedInstanceTypes
    Description: The instance types to exclude. You can use strings with one or more wild cards, represented by an asterisk (), to exclude an instance type, size, or generation. The following are examples: m5.8xlarge, c5., m5a., r*, 3. For example, if you specify c5*,Amazon EC2 will exclude the entire C5 instance family, which includes all C5a and C5n instance types. If you specify m5a.*, Amazon EC2 will exclude all the M5a instance types, but not the M5n instance types. If you specify ExcludedInstanceTypes, you can’t specify AllowedInstanceTypes.
    Default: No excluded instance types
  • instance_generations
    Type: UNORDERED_LIST_STRING
    Provider name: InstanceGenerations
    Description: Indicates whether current or previous generation instance types are included. The current generation instance types are recommended for use. Current generation instance types are typically the latest two to three generations in each instance family. For more information, see Instance types in the Amazon EC2 User Guide. For current generation instance types, specify current. For previous generation instance types, specify previous.
    Default: Current and previous generation instance types
  • local_storage
    Type: STRING
    Provider name: LocalStorage
    Description: Indicates whether instance types with instance store volumes are included, excluded, or required. For more information, Amazon EC2 instance store in the Amazon EC2 User Guide.
    • To include instance types with instance store volumes, specify included.
    • To require only instance types with instance store volumes, specify required.
    • To exclude instance types with instance store volumes, specify excluded.
    Default: included
  • local_storage_types
    Type: UNORDERED_LIST_STRING
    Provider name: LocalStorageTypes
    Description: The type of local storage that is required.
    • For instance types with hard disk drive (HDD) storage, specify hdd.
    • For instance types with solid state drive (SSD) storage, specify ssd.
    Default: hdd and ssd
  • max_spot_price_as_percentage_of_optimal_on_demand_price
    Type: INT32
    Provider name: MaxSpotPriceAsPercentageOfOptimalOnDemandPrice
    Description: [Price protection] The price protection threshold for Spot Instances, as a percentage of an identified On-Demand price. The identified On-Demand price is the price of the lowest priced current generation C, M, or R instance type with your specified attributes. If no current generation C, M, or R instance type matches your attributes, then the identified price is from the lowest priced current generation instance types, and failing that, from the lowest priced previous generation instance types that match your attributes. When Amazon EC2 selects instance types with your attributes, it will exclude instance types whose price exceeds your specified threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. If you set TargetCapacityUnitType to vcpu or memory-mib, the price protection threshold is based on the per vCPU or per memory price instead of the per instance price. Only one of SpotMaxPricePercentageOverLowestPrice or MaxSpotPriceAsPercentageOfOptimalOnDemandPrice can be specified. If you don’t specify either, Amazon EC2 will automatically apply optimal price protection to consistently select from a wide range of instance types. To indicate no price protection threshold for Spot Instances, meaning you want to consider all instance types that match your attributes, include one of these parameters and specify a high value, such as 999999.
    
  • memory_gib_per_v_cpu
    Type: STRUCT
    Provider name: MemoryGiBPerVCpu
    Description: The minimum and maximum amount of memory per vCPU, in GiB.
    Default: No minimum or maximum limits
    • max
      Type: DOUBLE
      Provider name: Max
      Description: The maximum amount of memory per vCPU, in GiB. If this parameter is not specified, there is no maximum limit.
      
    • min
      Type: DOUBLE
      Provider name: Min
      Description: The minimum amount of memory per vCPU, in GiB. If this parameter is not specified, there is no minimum limit.
      
  • memory_mib
    Type: STRUCT
    Provider name: MemoryMiB
    Description: The minimum and maximum amount of memory, in MiB.
    
    • max
      Type: INT32
      Provider name: Max
      Description: The maximum amount of memory, in MiB. If this parameter is not specified, there is no maximum limit.
      
    • min
      Type: INT32
      Provider name: Min
      Description: The minimum amount of memory, in MiB. If this parameter is not specified, there is no minimum limit.
      
  • network_bandwidth_gbps
    Type: STRUCT
    Provider name: NetworkBandwidthGbps
    Description: The minimum and maximum amount of network bandwidth, in gigabits per second (Gbps).
    Default: No minimum or maximum limits
    • max
      Type: DOUBLE
      Provider name: Max
      Description: The maximum amount of network bandwidth, in Gbps. If this parameter is not specified, there is no maximum limit.
      
    • min
      Type: DOUBLE
      Provider name: Min
      Description: The minimum amount of network bandwidth, in Gbps. If this parameter is not specified, there is no minimum limit.
      
  • network_interface_count
    Type: STRUCT
    Provider name: NetworkInterfaceCount
    Description: The minimum and maximum number of network interfaces.
    Default: No minimum or maximum limits
    • max
      Type: INT32
      Provider name: Max
      Description: The maximum number of network interfaces. If this parameter is not specified, there is no maximum limit.
      
    • min
      Type: INT32
      Provider name: Min
      Description: The minimum number of network interfaces. If this parameter is not specified, there is no minimum limit.
      
  • on_demand_max_price_percentage_over_lowest_price
    Type: INT32
    Provider name: OnDemandMaxPricePercentageOverLowestPrice
    Description: [Price protection] The price protection threshold for On-Demand Instances, as a percentage higher than an identified On-Demand price. The identified On-Demand price is the price of the lowest priced current generation C, M, or R instance type with your specified attributes. When Amazon EC2 selects instance types with your attributes, it will exclude instance types whose price exceeds your specified threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. To turn off price protection, specify a high value, such as 999999. This parameter is not supported for GetSpotPlacementScores and GetInstanceTypesFromInstanceRequirements. If you set TargetCapacityUnitType to vcpu or memory-mib, the price protection threshold is applied based on the per-vCPU or per-memory price instead of the per-instance price.
    Default: 20
  • require_hibernate_support
    Type: BOOLEAN
    Provider name: RequireHibernateSupport
    Description: Indicates whether instance types must support hibernation for On-Demand Instances. This parameter is not supported for GetSpotPlacementScores.
    Default: false
  • spot_max_price_percentage_over_lowest_price
    Type: INT32
    Provider name: SpotMaxPricePercentageOverLowestPrice
    Description: [Price protection] The price protection threshold for Spot Instances, as a percentage higher than an identified Spot price. The identified Spot price is the Spot price of the lowest priced current generation C, M, or R instance type with your specified attributes. If no current generation C, M, or R instance type matches your attributes, then the identified Spot price is from the lowest priced current generation instance types, and failing that, from the lowest priced previous generation instance types that match your attributes. When Amazon EC2 selects instance types with your attributes, it will exclude instance types whose Spot price exceeds your specified threshold. The parameter accepts an integer, which Amazon EC2 interprets as a percentage. If you set TargetCapacityUnitType to vcpu or memory-mib, the price protection threshold is applied based on the per-vCPU or per-memory price instead of the per-instance price. This parameter is not supported for GetSpotPlacementScores and GetInstanceTypesFromInstanceRequirements. Only one of SpotMaxPricePercentageOverLowestPrice or MaxSpotPriceAsPercentageOfOptimalOnDemandPrice can be specified. If you don’t specify either, Amazon EC2 will automatically apply optimal price protection to consistently select from a wide range of instance types. To indicate no price protection threshold for Spot Instances, meaning you want to consider all instance types that match your attributes, include one of these parameters and specify a high value, such as 999999.
    Default: 100
  • total_local_storage_gb
    Type: STRUCT
    Provider name: TotalLocalStorageGB
    Description: The minimum and maximum amount of total local storage, in GB.
    Default: No minimum or maximum limits
    • max
      Type: DOUBLE
      Provider name: Max
      Description: The maximum amount of total local storage, in GB. If this parameter is not specified, there is no maximum limit.
      
    • min
      Type: DOUBLE
      Provider name: Min
      Description: The minimum amount of total local storage, in GB. If this parameter is not specified, there is no minimum limit.
      
  • v_cpu_count
    Type: STRUCT
    Provider name: VCpuCount
    Description: The minimum and maximum number of vCPUs.
    
    • max
      Type: INT32
      Provider name: Max
      Description: The maximum number of vCPUs. If this parameter is not specified, there is no maximum limit.
      
    • min
      Type: INT32
      Provider name: Min
      Description: The minimum number of vCPUs. If the value is 0, there is no minimum limit.
      
• instance_type
  Type: STRING
  Provider name: InstanceType
  Description: The instance type.
  
• kernel_id
  Type: STRING
  Provider name: KernelId
  Description: The ID of the kernel, if applicable.
  
• key_name
  Type: STRING
  Provider name: KeyName
  Description: The name of the key pair.
  
• license_specifications
  Type: UNORDERED_LIST_STRUCT
  Provider name: LicenseSpecifications
  Description: The license configurations.
  
  • license_configuration_arn
    Type: STRING
    Provider name: LicenseConfigurationArn
    Description: The Amazon Resource Name (ARN) of the license configuration.
    
• maintenance_options
  Type: STRUCT
  Provider name: MaintenanceOptions
  Description: The maintenance options for your instance.
  
  • auto_recovery
    Type: STRING
    Provider name: AutoRecovery
    Description: Disables the automatic recovery behavior of your instance or sets it to default.
    
• metadata_options
  Type: STRUCT
  Provider name: MetadataOptions
  Description: The metadata options for the instance. For more information, see Instance metadata and user data in the Amazon EC2 User Guide.
  
  • http_endpoint
    Type: STRING
    Provider name: HttpEndpoint
    Description: Enables or disables the HTTP metadata endpoint on your instances. If the parameter is not specified, the default state is enabled. If you specify a value of disabled, you will not be able to access your instance metadata.
    
  • http_protocol_ipv6
    Type: STRING
    Provider name: HttpProtocolIpv6
    Description: Enables or disables the IPv6 endpoint for the instance metadata service.
    Default: disabled
  • http_put_response_hop_limit
    Type: INT32
    Provider name: HttpPutResponseHopLimit
    Description: The desired HTTP PUT response hop limit for instance metadata requests. The larger the number, the further instance metadata requests can travel.
    Default: 1

    Possible values: Integers from 1 to 64

  • http_tokens
    Type: STRING
    Provider name: HttpTokens
    Description: Indicates whether IMDSv2 is required.
    • optional - IMDSv2 is optional. You can choose whether to send a session token in your instance metadata retrieval requests. If you retrieve IAM role credentials without a session token, you receive the IMDSv1 role credentials. If you retrieve IAM role credentials using a valid session token, you receive the IMDSv2 role credentials.
    • required - IMDSv2 is required. You must send a session token in your instance metadata retrieval requests. With this option, retrieving the IAM role credentials always returns IMDSv2 credentials; IMDSv1 credentials are not available.
  • instance_metadata_tags
    Type: STRING
    Provider name: InstanceMetadataTags
    Description: Set to enabled to allow access to instance tags from the instance metadata. Set to disabled to turn off access to instance tags from the instance metadata. For more information, see Work with instance tags using the instance metadata.
    Default: disabled
  • state
    Type: STRING
    Provider name: State
    Description: The state of the metadata option changes. pending - The metadata options are being updated and the instance is not ready to process metadata traffic with the new selection. applied - The metadata options have been successfully applied on the instance.
    
• monitoring
  Type: STRUCT
  Provider name: Monitoring
  Description: The monitoring for the instance.
  
  • enabled
    Type: BOOLEAN
    Provider name: Enabled
    Description: Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring is enabled.
    
• network_interfaces
  Type: UNORDERED_LIST_STRUCT
  Provider name: NetworkInterfaces
  Description: The network interfaces.
  
  • associate_carrier_ip_address
    Type: BOOLEAN
    Provider name: AssociateCarrierIpAddress
    Description: Indicates whether to associate a Carrier IP address with eth0 for a new network interface. Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP addresses in the Wavelength Developer Guide.
    
  • associate_public_ip_address
    Type: BOOLEAN
    Provider name: AssociatePublicIpAddress
    Description: Indicates whether to associate a public IPv4 address with eth0 for a new network interface. Amazon Web Services charges for all public IPv4 addresses, including public IPv4 addresses associated with running instances and Elastic IP addresses. For more information, see the Public IPv4 Address tab on the Amazon VPC pricing page.
    
  • connection_tracking_specification
    Type: STRUCT
    Provider name: ConnectionTrackingSpecification
    Description: A security group connection tracking specification that enables you to set the timeout for connection tracking on an Elastic network interface. For more information, see Idle connection tracking timeout in the Amazon EC2 User Guide.
    
    • tcp_established_timeout
      Type: INT32
      Provider name: TcpEstablishedTimeout
      Description: Timeout (in seconds) for idle TCP connections in an established state. Min: 60 seconds. Max: 432000 seconds (5 days). Default: 432000 seconds. Recommended: Less than 432000 seconds.
      
    • udp_stream_timeout
      Type: INT32
      Provider name: UdpStreamTimeout
      Description: Timeout (in seconds) for idle UDP flows classified as streams which have seen more than one request-response transaction. Min: 60 seconds. Max: 180 seconds (3 minutes). Default: 180 seconds.
      
    • udp_timeout
      Type: INT32
      Provider name: UdpTimeout
      Description: Timeout (in seconds) for idle UDP flows that have seen traffic only in a single direction or a single request-response transaction. Min: 30 seconds. Max: 60 seconds. Default: 30 seconds.
      
  • delete_on_termination
    Type: BOOLEAN
    Provider name: DeleteOnTermination
    Description: Indicates whether the network interface is deleted when the instance is terminated.
    
  • description
    Type: STRING
    Provider name: Description
    Description: A description for the network interface.
    
  • device_index
    Type: INT32
    Provider name: DeviceIndex
    Description: The device index for the network interface attachment.
    
  • ena_srd_specification
    Type: STRUCT
    Provider name: EnaSrdSpecification
    Description: Contains the ENA Express settings for instances launched from your launch template.
    
    • ena_srd_enabled
      Type: BOOLEAN
      Provider name: EnaSrdEnabled
      Description: Indicates whether ENA Express is enabled for the network interface.
      
    • ena_srd_udp_specification
      Type: STRUCT
      Provider name: EnaSrdUdpSpecification
      Description: Configures ENA Express for UDP network traffic.
      
      • ena_srd_udp_enabled
        Type: BOOLEAN
        Provider name: EnaSrdUdpEnabled
        Description: Indicates whether UDP traffic to and from the instance uses ENA Express. To specify this setting, you must first enable ENA Express.
        
  • groups
    Type: UNORDERED_LIST_STRING
    Provider name: Groups
    Description: The IDs of one or more security groups.
    
  • interface_type
    Type: STRING
    Provider name: InterfaceType
    Description: The type of network interface.
    
  • ipv4_prefix_count
    Type: INT32
    Provider name: Ipv4PrefixCount
    Description: The number of IPv4 prefixes that Amazon Web Services automatically assigned to the network interface.
    
  • ipv4_prefixes
    Type: UNORDERED_LIST_STRUCT
    Provider name: Ipv4Prefixes
    Description: One or more IPv4 prefixes assigned to the network interface.
    
    • ipv4_prefix
      Type: STRING
      Provider name: Ipv4Prefix
      Description: The IPv4 delegated prefixes assigned to the network interface.
      
  • ipv6_address_count
    Type: INT32
    Provider name: Ipv6AddressCount
    Description: The number of IPv6 addresses for the network interface.
    
  • ipv6_addresses
    Type: UNORDERED_LIST_STRUCT
    Provider name: Ipv6Addresses
    Description: The IPv6 addresses for the network interface.
    
    • ipv6_address
      Type: STRING
      Provider name: Ipv6Address
      Description: The IPv6 address.
      
    • is_primary_ipv6
      Type: BOOLEAN
      Provider name: IsPrimaryIpv6
      Description: Determines if an IPv6 address associated with a network interface is the primary IPv6 address. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. For more information, see RunInstances.
      
  • ipv6_prefix_count
    Type: INT32
    Provider name: Ipv6PrefixCount
    Description: The number of IPv6 prefixes that Amazon Web Services automatically assigned to the network interface.
    
  • ipv6_prefixes
    Type: UNORDERED_LIST_STRUCT
    Provider name: Ipv6Prefixes
    Description: One or more IPv6 prefixes assigned to the network interface.
    
    • ipv6_prefix
      Type: STRING
      Provider name: Ipv6Prefix
      Description: The IPv6 delegated prefixes assigned to the network interface.
      
  • network_card_index
    Type: INT32
    Provider name: NetworkCardIndex
    Description: The index of the network card.
    
  • network_interface_id
    Type: STRING
    Provider name: NetworkInterfaceId
    Description: The ID of the network interface.
    
  • primary_ipv6
    Type: BOOLEAN
    Provider name: PrimaryIpv6
    Description: The primary IPv6 address of the network interface. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. For more information about primary IPv6 addresses, see RunInstances.
    
  • private_ip_address
    Type: STRING
    Provider name: PrivateIpAddress
    Description: The primary private IPv4 address of the network interface.
    
  • private_ip_addresses
    Type: UNORDERED_LIST_STRUCT
    Provider name: PrivateIpAddresses
    Description: One or more private IPv4 addresses.
    
    • primary
      Type: BOOLEAN
      Provider name: Primary
      Description: Indicates whether the private IPv4 address is the primary private IPv4 address. Only one IPv4 address can be designated as primary.
      
    • private_ip_address
      Type: STRING
      Provider name: PrivateIpAddress
      Description: The private IPv4 address.
      
  • secondary_private_ip_address_count
    Type: INT32
    Provider name: SecondaryPrivateIpAddressCount
    Description: The number of secondary private IPv4 addresses for the network interface.
    
  • subnet_id
    Type: STRING
    Provider name: SubnetId
    Description: The ID of the subnet for the network interface.
    
• placement
  Type: STRUCT
  Provider name: Placement
  Description: The placement of the instance.
  
  • affinity
    Type: STRING
    Provider name: Affinity
    Description: The affinity setting for the instance on the Dedicated Host.
    
  • availability_zone
    Type: STRING
    Provider name: AvailabilityZone
    Description: The Availability Zone of the instance.
    
  • group_id
    Type: STRING
    Provider name: GroupId
    Description: The Group ID of the placement group. You must specify the Placement Group Group ID to launch an instance in a shared placement group.
    
  • group_name
    Type: STRING
    Provider name: GroupName
    Description: The name of the placement group for the instance.
    
  • host_id
    Type: STRING
    Provider name: HostId
    Description: The ID of the Dedicated Host for the instance.
    
  • host_resource_group_arn
    Type: STRING
    Provider name: HostResourceGroupArn
    Description: The ARN of the host resource group in which to launch the instances.
    
  • partition_number
    Type: INT32
    Provider name: PartitionNumber
    Description: The number of the partition the instance should launch in. Valid only if the placement group strategy is set to partition.
    
  • spread_domain
    Type: STRING
    Provider name: SpreadDomain
    Description: Reserved for future use.
    
  • tenancy
    Type: STRING
    Provider name: Tenancy
    Description: The tenancy of the instance. An instance with a tenancy of dedicated runs on single-tenant hardware.
    
• private_dns_name_options
  Type: STRUCT
  Provider name: PrivateDnsNameOptions
  Description: The options for the instance hostname.
  
  • enable_resource_name_dns_a_record
    Type: BOOLEAN
    Provider name: EnableResourceNameDnsARecord
    Description: Indicates whether to respond to DNS queries for instance hostnames with DNS A records.
    
  • enable_resource_name_dns_aaaa_record
    Type: BOOLEAN
    Provider name: EnableResourceNameDnsAAAARecord
    Description: Indicates whether to respond to DNS queries for instance hostnames with DNS AAAA records.
    
  • hostname_type
    Type: STRING
    Provider name: HostnameType
    Description: The type of hostname to assign to an instance.
    
• ram_disk_id
  Type: STRING
  Provider name: RamDiskId
  Description: The ID of the RAM disk, if applicable.
  
• security_group_ids
  Type: UNORDERED_LIST_STRING
  Provider name: SecurityGroupIds
  Description: The security group IDs.
  
• security_groups
  Type: UNORDERED_LIST_STRING
  Provider name: SecurityGroups
  Description: The security group names.
  
• tag_specifications
  Type: UNORDERED_LIST_STRUCT
  Provider name: TagSpecifications
  Description: The tags that are applied to the resources that are created during instance launch.
  
  • resource_type
    Type: STRING
    Provider name: ResourceType
    Description: The type of resource to tag.
    
• user_data
  Type: STRING
  Provider name: UserData
  Description: The user data for the instance.
  

launch_time

Type: TIMESTAMP
Provider name: LaunchTime
Description: The time the instance was launched.

licenses

Type: UNORDERED_LIST_STRUCT
Provider name: Licenses
Description: The license configurations for the instance.

• license_configuration_arn
  Type: STRING
  Provider name: LicenseConfigurationArn
  Description: The Amazon Resource Name (ARN) of the license configuration.
  

maintenance_options

Type: STRUCT
Provider name: MaintenanceOptions
Description: Provides information on the recovery and maintenance options of your instance.

• auto_recovery
  Type: STRING
  Provider name: AutoRecovery
  Description: Provides information on the current automatic recovery behavior of your instance.
  

metadata_options

Type: STRUCT
Provider name: MetadataOptions
Description: The metadata options for the instance.

• http_endpoint
  Type: STRING
  Provider name: HttpEndpoint
  Description: Indicates whether the HTTP metadata endpoint on your instances is enabled or disabled. If the value is disabled, you cannot access your instance metadata.
  
• http_protocol_ipv6
  Type: STRING
  Provider name: HttpProtocolIpv6
  Description: Indicates whether the IPv6 endpoint for the instance metadata service is enabled or disabled.
  Default: disabled
• http_put_response_hop_limit
  Type: INT32
  Provider name: HttpPutResponseHopLimit
  Description: The maximum number of hops that the metadata token can travel. Possible values: Integers from 1 to 64
  
• http_tokens
  Type: STRING
  Provider name: HttpTokens
  Description: Indicates whether IMDSv2 is required.
  • optional - IMDSv2 is optional, which means that you can use either IMDSv2 or IMDSv1.
  • required - IMDSv2 is required, which means that IMDSv1 is disabled, and you must use IMDSv2.
• instance_metadata_tags
  Type: STRING
  Provider name: InstanceMetadataTags
  Description: Indicates whether access to instance tags from the instance metadata is enabled or disabled. For more information, see Work with instance tags using the instance metadata.
  
• state
  Type: STRING
  Provider name: State
  Description: The state of the metadata option changes. pending - The metadata options are being updated and the instance is not ready to process metadata traffic with the new selection. applied - The metadata options have been successfully applied on the instance.
  

monitoring

Type: STRUCT
Provider name: Monitoring
Description: The monitoring for the instance.

• state
  Type: STRING
  Provider name: State
  Description: Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring is enabled.
  

network_interfaces

Type: UNORDERED_LIST_STRUCT
Provider name: NetworkInterfaces
Description: The network interfaces for the instance.

• association
  Type: STRUCT
  Provider name: Association
  Description: The association information for an Elastic IPv4 associated with the network interface.
  
  • carrier_ip
    Type: STRING
    Provider name: CarrierIp
    Description: The carrier IP address associated with the network interface.
    
  • customer_owned_ip
    Type: STRING
    Provider name: CustomerOwnedIp
    Description: The customer-owned IP address associated with the network interface.
    
  • ip_owner_id
    Type: STRING
    Provider name: IpOwnerId
    Description: The ID of the owner of the Elastic IP address.
    
  • public_dns_name
    Type: STRING
    Provider name: PublicDnsName
    Description: The public DNS name.
    
  • public_ip
    Type: STRING
    Provider name: PublicIp
    Description: The public IP address or Elastic IP address bound to the network interface.
    
• attachment
  Type: STRUCT
  Provider name: Attachment
  Description: The network interface attachment.
  
  • attach_time
    Type: TIMESTAMP
    Provider name: AttachTime
    Description: The time stamp when the attachment initiated.
    
  • attachment_id
    Type: STRING
    Provider name: AttachmentId
    Description: The ID of the network interface attachment.
    
  • delete_on_termination
    Type: BOOLEAN
    Provider name: DeleteOnTermination
    Description: Indicates whether the network interface is deleted when the instance is terminated.
    
  • device_index
    Type: INT32
    Provider name: DeviceIndex
    Description: The index of the device on the instance for the network interface attachment.
    
  • ena_srd_specification
    Type: STRUCT
    Provider name: EnaSrdSpecification
    Description: Contains the ENA Express settings for the network interface that’s attached to the instance.
    
    • ena_srd_enabled
      Type: BOOLEAN
      Provider name: EnaSrdEnabled
      Description: Indicates whether ENA Express is enabled for the network interface.
      
    • ena_srd_udp_specification
      Type: STRUCT
      Provider name: EnaSrdUdpSpecification
      Description: Configures ENA Express for UDP network traffic.
      
      • ena_srd_udp_enabled
        Type: BOOLEAN
        Provider name: EnaSrdUdpEnabled
        Description: Indicates whether UDP traffic to and from the instance uses ENA Express. To specify this setting, you must first enable ENA Express.
        
  • network_card_index
    Type: INT32
    Provider name: NetworkCardIndex
    Description: The index of the network card.
    
  • status
    Type: STRING
    Provider name: Status
    Description: The attachment state.
    
• connection_tracking_configuration
  Type: STRUCT
  Provider name: ConnectionTrackingConfiguration
  Description: A security group connection tracking configuration that enables you to set the timeout for connection tracking on an Elastic network interface. For more information, see Connection tracking timeouts in the Amazon EC2 User Guide.
  
  • tcp_established_timeout
    Type: INT32
    Provider name: TcpEstablishedTimeout
    Description: Timeout (in seconds) for idle TCP connections in an established state. Min: 60 seconds. Max: 432000 seconds (5 days). Default: 432000 seconds. Recommended: Less than 432000 seconds.
    
  • udp_stream_timeout
    Type: INT32
    Provider name: UdpStreamTimeout
    Description: Timeout (in seconds) for idle UDP flows classified as streams which have seen more than one request-response transaction. Min: 60 seconds. Max: 180 seconds (3 minutes). Default: 180 seconds.
    
  • udp_timeout
    Type: INT32
    Provider name: UdpTimeout
    Description: Timeout (in seconds) for idle UDP flows that have seen traffic only in a single direction or a single request-response transaction. Min: 30 seconds. Max: 60 seconds. Default: 30 seconds.
    
• description
  Type: STRING
  Provider name: Description
  Description: The description.
  
• groups
  Type: UNORDERED_LIST_STRUCT
  Provider name: Groups
  Description: The security groups.
  
  • group_id
    Type: STRING
    Provider name: GroupId
    Description: The ID of the security group.
    
  • group_name
    Type: STRING
    Provider name: GroupName
    Description: The name of the security group.
    
• interface_type
  Type: STRING
  Provider name: InterfaceType
  Description: The type of network interface. Valid values: interface | efa | trunk
  
• ipv4_prefixes
  Type: UNORDERED_LIST_STRUCT
  Provider name: Ipv4Prefixes
  Description: The IPv4 delegated prefixes that are assigned to the network interface.
  
  • ipv4_prefix
    Type: STRING
    Provider name: Ipv4Prefix
    Description: One or more IPv4 prefixes assigned to the network interface.
    
• ipv6_addresses
  Type: UNORDERED_LIST_STRUCT
  Provider name: Ipv6Addresses
  Description: The IPv6 addresses associated with the network interface.
  
  • ipv6_address
    Type: STRING
    Provider name: Ipv6Address
    Description: The IPv6 address.
    
  • is_primary_ipv6
    Type: BOOLEAN
    Provider name: IsPrimaryIpv6
    Description: Determines if an IPv6 address associated with a network interface is the primary IPv6 address. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. For more information, see RunInstances.
    
• ipv6_prefixes
  Type: UNORDERED_LIST_STRUCT
  Provider name: Ipv6Prefixes
  Description: The IPv6 delegated prefixes that are assigned to the network interface.
  
  • ipv6_prefix
    Type: STRING
    Provider name: Ipv6Prefix
    Description: One or more IPv6 prefixes assigned to the network interface.
    
• mac_address
  Type: STRING
  Provider name: MacAddress
  Description: The MAC address.
  
• network_interface_id
  Type: STRING
  Provider name: NetworkInterfaceId
  Description: The ID of the network interface.
  
• owner_id
  Type: STRING
  Provider name: OwnerId
  Description: The ID of the Amazon Web Services account that created the network interface.
  
• private_dns_name
  Type: STRING
  Provider name: PrivateDnsName
  Description: The private DNS name.
  
• private_ip_address
  Type: STRING
  Provider name: PrivateIpAddress
  Description: The IPv4 address of the network interface within the subnet.
  
• private_ip_addresses
  Type: UNORDERED_LIST_STRUCT
  Provider name: PrivateIpAddresses
  Description: The private IPv4 addresses associated with the network interface.
  
  • association
    Type: STRUCT
    Provider name: Association
    Description: The association information for an Elastic IP address for the network interface.
    
    • carrier_ip
      Type: STRING
      Provider name: CarrierIp
      Description: The carrier IP address associated with the network interface.
      
    • customer_owned_ip
      Type: STRING
      Provider name: CustomerOwnedIp
      Description: The customer-owned IP address associated with the network interface.
      
    • ip_owner_id
      Type: STRING
      Provider name: IpOwnerId
      Description: The ID of the owner of the Elastic IP address.
      
    • public_dns_name
      Type: STRING
      Provider name: PublicDnsName
      Description: The public DNS name.
      
    • public_ip
      Type: STRING
      Provider name: PublicIp
      Description: The public IP address or Elastic IP address bound to the network interface.
      
  • primary
    Type: BOOLEAN
    Provider name: Primary
    Description: Indicates whether this IPv4 address is the primary private IP address of the network interface.
    
  • private_dns_name
    Type: STRING
    Provider name: PrivateDnsName
    Description: The private IPv4 DNS name.
    
  • private_ip_address
    Type: STRING
    Provider name: PrivateIpAddress
    Description: The private IPv4 address of the network interface.
    
• source_dest_check
  Type: BOOLEAN
  Provider name: SourceDestCheck
  Description: Indicates whether source/destination checking is enabled.
  
• status
  Type: STRING
  Provider name: Status
  Description: The status of the network interface.
  
• subnet_id
  Type: STRING
  Provider name: SubnetId
  Description: The ID of the subnet.
  
• vpc_id
  Type: STRING
  Provider name: VpcId
  Description: The ID of the VPC.
  

outpost_arn

Type: STRING
Provider name: OutpostArn
Description: The Amazon Resource Name (ARN) of the Outpost.

placement

Type: STRUCT
Provider name: Placement
Description: The location where the instance launched, if applicable.

• affinity
  Type: STRING
  Provider name: Affinity
  Description: The affinity setting for the instance on the Dedicated Host. This parameter is not supported for CreateFleet or ImportInstance.
  
• availability_zone
  Type: STRING
  Provider name: AvailabilityZone
  Description: The Availability Zone of the instance. If not specified, an Availability Zone will be automatically chosen for you based on the load balancing criteria for the Region. This parameter is not supported for CreateFleet.
  
• group_id
  Type: STRING
  Provider name: GroupId
  Description: The ID of the placement group that the instance is in. If you specify GroupId, you can’t specify GroupName.
  
• group_name
  Type: STRING
  Provider name: GroupName
  Description: The name of the placement group that the instance is in. If you specify GroupName, you can’t specify GroupId.
  
• host_id
  Type: STRING
  Provider name: HostId
  Description: The ID of the Dedicated Host on which the instance resides. This parameter is not supported for CreateFleet or ImportInstance.
  
• host_resource_group_arn
  Type: STRING
  Provider name: HostResourceGroupArn
  Description: The ARN of the host resource group in which to launch the instances. If you specify this parameter, either omit the Tenancy parameter or set it to host. This parameter is not supported for CreateFleet.
  
• partition_number
  Type: INT32
  Provider name: PartitionNumber
  Description: The number of the partition that the instance is in. Valid only if the placement group strategy is set to partition. This parameter is not supported for CreateFleet.
  
• spread_domain
  Type: STRING
  Provider name: SpreadDomain
  Description: Reserved for future use.
  
• tenancy
  Type: STRING
  Provider name: Tenancy
  Description: The tenancy of the instance. An instance with a tenancy of dedicated runs on single-tenant hardware. This parameter is not supported for CreateFleet. The host tenancy is not supported for ImportInstance or for T3 instances that are configured for the unlimited CPU credit option.
  

platform

Type: STRING
Provider name: Platform
Description: The platform. This value is windows for Windows instances; otherwise, it is empty.

platform_details

Type: STRING
Provider name: PlatformDetails
Description: The platform details value for the instance. For more information, see AMI billing information fields in the Amazon EC2 User Guide.

private_dns_name

Type: STRING
Provider name: PrivateDnsName
Description: [IPv4 only] The private DNS hostname name assigned to the instance. This DNS hostname can only be used inside the Amazon EC2 network. This name is not available until the instance enters the running state. The Amazon-provided DNS server resolves Amazon-provided private DNS hostnames if you’ve enabled DNS resolution and DNS hostnames in your VPC. If you are not using the Amazon-provided DNS server in your VPC, your custom domain name servers must resolve the hostname as appropriate.

private_dns_name_options

Type: STRUCT
Provider name: PrivateDnsNameOptions
Description: The options for the instance hostname.

• enable_resource_name_dns_a_record
  Type: BOOLEAN
  Provider name: EnableResourceNameDnsARecord
  Description: Indicates whether to respond to DNS queries for instance hostnames with DNS A records.
  
• enable_resource_name_dns_aaaa_record
  Type: BOOLEAN
  Provider name: EnableResourceNameDnsAAAARecord
  Description: Indicates whether to respond to DNS queries for instance hostnames with DNS AAAA records.
  
• hostname_type
  Type: STRING
  Provider name: HostnameType
  Description: The type of hostname to assign to an instance.
  

private_ip_address

Type: STRING
Provider name: PrivateIpAddress
Description: The private IPv4 address assigned to the instance.

product_codes

Type: UNORDERED_LIST_STRUCT
Provider name: ProductCodes
Description: The product codes attached to this instance, if applicable.

• product_code_id
  Type: STRING
  Provider name: ProductCodeId
  Description: The product code.
  
• product_code_type
  Type: STRING
  Provider name: ProductCodeType
  Description: The type of product code.
  

public_dns_name

Type: STRING
Provider name: PublicDnsName
Description: [IPv4 only] The public DNS name assigned to the instance. This name is not available until the instance enters the running state. This name is only available if you’ve enabled DNS hostnames for your VPC.

public_ip_address

Type: STRING
Provider name: PublicIpAddress
Description: The public IPv4 address, or the Carrier IP address assigned to the instance, if applicable. A Carrier IP address only applies to an instance launched in a subnet associated with a Wavelength Zone.

ramdisk_id

Type: STRING
Provider name: RamdiskId
Description: The RAM disk associated with this instance, if applicable.

root_device_name

Type: STRING
Provider name: RootDeviceName
Description: The device name of the root device volume (for example, /dev/sda1).

root_device_type

Type: STRING
Provider name: RootDeviceType
Description: The root device type used by the AMI. The AMI can use an EBS volume or an instance store volume.

security_groups

Type: UNORDERED_LIST_STRUCT
Provider name: SecurityGroups
Description: The security groups for the instance.

• group_id
  Type: STRING
  Provider name: GroupId
  Description: The ID of the security group.
  
• group_name
  Type: STRING
  Provider name: GroupName
  Description: The name of the security group.
  

source_dest_check

Type: BOOLEAN
Provider name: SourceDestCheck
Description: Indicates whether source/destination checking is enabled.

spot_instance_request_id

Type: STRING
Provider name: SpotInstanceRequestId
Description: If the request is a Spot Instance request, the ID of the request.

sriov_net_support

Type: STRING
Provider name: SriovNetSupport
Description: Specifies whether enhanced networking with the Intel 82599 Virtual Function interface is enabled.

state

Type: STRUCT
Provider name: State
Description: The current state of the instance.

• code
  Type: INT32
  Provider name: Code
  Description: The state of the instance as a 16-bit unsigned integer. The high byte is all of the bits between 2^8 and (2^16)-1, which equals decimal values between 256 and 65,535. These numerical values are used for internal purposes and should be ignored. The low byte is all of the bits between 2^0 and (2^8)-1, which equals decimal values between 0 and 255. The valid values for instance-state-code will all be in the range of the low byte and they are:
  • 0 : pending
  • 16 : running
  • 32 : shutting-down
  • 48 : terminated
  • 64 : stopping
  • 80 : stopped
  You can ignore the high byte value by zeroing out all of the bits above 2^8 or 256 in decimal.
  
• name
  Type: STRING
  Provider name: Name
  Description: The current state of the instance.
  

state_reason

Type: STRUCT
Provider name: StateReason
Description: The reason for the most recent state transition.

• code
  Type: STRING
  Provider name: Code
  Description: The reason code for the state change.
  
• message
  Type: STRING
  Provider name: Message
  Description: The message for the state change.
  • Server.InsufficientInstanceCapacity: There was insufficient capacity available to satisfy the launch request.
  • Server.InternalError: An internal error caused the instance to terminate during launch.
  • Server.ScheduledStop: The instance was stopped due to a scheduled retirement.
  • Server.SpotInstanceShutdown: The instance was stopped because the number of Spot requests with a maximum price equal to or higher than the Spot price exceeded available capacity or because of an increase in the Spot price.
  • Server.SpotInstanceTermination: The instance was terminated because the number of Spot requests with a maximum price equal to or higher than the Spot price exceeded available capacity or because of an increase in the Spot price.
  • Client.InstanceInitiatedShutdown: The instance was shut down from the operating system of the instance.
  • Client.InstanceTerminated: The instance was terminated or rebooted during AMI creation.
  • Client.InternalError: A client error caused the instance to terminate during launch.
  • Client.InvalidSnapshot.NotFound: The specified snapshot was not found.
  • Client.UserInitiatedHibernate: Hibernation was initiated on the instance.
  • Client.UserInitiatedShutdown: The instance was shut down using the Amazon EC2 API.
  • Client.VolumeLimitExceeded: The limit on the number of EBS volumes or total storage was exceeded. Decrease usage or request an increase in your account limits.

state_transition_reason

Type: STRING
Provider name: StateTransitionReason
Description: The reason for the most recent state transition. This might be an empty string.

subnet_id

Type: STRING
Provider name: SubnetId
Description: The ID of the subnet in which the instance is running.

tags

Type: UNORDERED_LIST_STRING

tpm_support

Type: STRING
Provider name: TpmSupport
Description: If the instance is configured for NitroTPM support, the value is v2.0. For more information, see NitroTPM in the Amazon EC2 User Guide.

usage_operation

Type: STRING
Provider name: UsageOperation
Description: The usage operation value for the instance. For more information, see AMI billing information fields in the Amazon EC2 User Guide.

usage_operation_update_time

Type: TIMESTAMP
Provider name: UsageOperationUpdateTime
Description: The time that the usage operation was last updated.

virtualization_type

Type: STRING
Provider name: VirtualizationType
Description: The virtualization type of the instance.

vpc_id

Type: STRING
Provider name: VpcId
Description: The ID of the VPC in which the instance is running.