Overview

The Datadog Agent automatically discovers containers and creates check configurations by using the Autodiscovery mechanism.

Cluster checks extend this mechanism to monitor noncontainerized workloads, including:

• Datastores and endpoints ran outside of the cluster (for example, RDS or CloudSQL).
• Load-balanced cluster services (for example, Kubernetes services).

This ensures that only one instance of each check runs as opposed to each node-based Agent Pod running this corresponding check. The Cluster Agent holds the configurations and dynamically dispatches them to node-based Agents. The Agents connect to the Cluster Agent every ten seconds and retrieve the configurations to run. If an Agent stops reporting, the Cluster Agent removes it from the active pool and dispatches the configurations to other Agents. This ensures that one (and only one) instance always runs, even as nodes are added and removed from the cluster.

Metrics, events, and service checks collected by cluster checks are submitted without a hostname, as it is not relevant. A cluster_name tag is added, to allow you to scope and filter your data.

Using cluster checks is recommended if your infrastructure is configured for high availability (HA).

Set up cluster check dispatching

The setup process involves enabling the dispatching ability in the Cluster Agent, as well as ensuring the Agents are prepared to receive configurations from the clusterchecks provider. Once this is done, configurations are passed to the Cluster Agent through mounted configuration files or through Kubernetes service annotations.

datadog:
  clusterChecks:
    enabled: true
  # (...)
clusterAgent:
  enabled: true
  # (...)

apiVersion: datadoghq.com/v2alpha1
kind: DatadogAgent
metadata:
  name: datadog
spec:
  features:
    clusterChecks:
      enabled: true

Note: With cluster checks, the metrics reported by the Agent are not linked to a given hostname because they are meant to be cluster-centric metrics and not necessarily host-based metrics. As a result, these metrics do not inherit any host-level tags associated with that host, such as those inherited from a cloud provider or added by the Agent’s DD_TAGS environment variable. To add tags to cluster check metrics, use the DD_CLUSTER_CHECKS_EXTRA_TAGS environment variable.

Cluster check runners

The Datadog Helm Chart and the Datadog Operator additionally offer the possibility to deploy cluster check runners, which are a deployment for a small set of Datadog Agents configured to run these dispatched cluster checks only—instead of dispatching these to the normal node-based Agents. See the Cluster Check Runner guide for more details.

Advanced dispatching

The Cluster Agent can use an advanced dispatching logic for cluster checks, which takes into account the execution time and metric samples from check instances. This logic enables the Cluster Agent to optimize dispatching and distribution between cluster check runners.

To configure advanced dispatching logic, set the DD_CLUSTER_CHECKS_ADVANCED_DISPATCHING_ENABLED environment variable to true for the Cluster Agent.

The following environment variables are required to configure the node Agents (or cluster check runners) to expose their check stats. The stats are consumed by the Cluster Agent and are used to optimize the cluster checks’ dispatching logic.

  env:
    - name: DD_CLC_RUNNER_ENABLED
      value: "true"
    - name: DD_CLC_RUNNER_HOST
      valueFrom:
        fieldRef:
          fieldPath: status.podIP

Custom checks

Running custom Agent checks as cluster checks is supported, as long as all node-based Agents are able to run the check. This means your custom check code:

• Must be installed on all node-based Agents where the clusterchecks config provider is enabled.
• Must not depend on local resources that are not accessible to all Agents.

Setting up check configurations

Configuration from configuration files

When the URL or IP of a given resource is constant (for example, an external service endpoint or a public URL), a static configuration can be passed to the Cluster Agent as YAML files. The file name convention and syntax are the same as the static configurations on the node-based Agent, with the required addition of the cluster_check: true line.

In Cluster Agent v1.18.0+, you can use advanced_ad_identifiers and Autodiscovery template variables in your check configuration to target Kubernetes services (see example).

#(...)
clusterAgent:
  confd:
    <INTEGRATION_NAME>.yaml: |-
      cluster_check: true
      init_config:
        - <INIT_CONFIG>
      instances:
        - <INSTANCES_CONFIG>      

spec:
#(...)
  override:
    clusterAgent:
      extraConfd:
        configDataMap:
          <INTEGRATION_NAME>.yaml: |-
            cluster_check: true
            init_config:
              - <INIT_CONFIG>
            instances:
              - <INSTANCES_CONFIG>            

spec:
#(...)
  override:
    clusterAgent:
      extraConfd:
        configMap:
          name: "<NAME>-config-map"
          items:
            - key: <INTEGRATION_NAME>-config
              path: <INTEGRATION_NAME>.yaml

kind: ConfigMap
apiVersion: v1
metadata:
  name: "<NAME>-config-map"
data:
  <INTEGRATION_NAME>-config: |-
    cluster_check: true
    init_config:
      <INIT_CONFIG>
    instances:
      <INSTANCES_CONFIG>    

kind: ConfigMap
apiVersion: v1
metadata:
  name: "<NAME>-config-map"
data:
  <INTEGRATION_NAME>-config: |-
    cluster_check: true
    init_config:
      <INIT_CONFIG>
    instances:
      <INSTANCES_CONFIG>    

        volumeMounts:
          - name: <NAME>-config-map
            mountPath: /conf.d/
            # (...)
      volumes:
        - name: <NAME>-config-map
          configMap:
            name: <NAME>-config-map
            items:
              - key: <INTEGRATION_NAME>-config
                path: <INTEGRATION_NAME>.yaml
          #(...)

Example: MySQL check on an externally hosted database

After you set up an externally hosted database, such as CloudSQL or RDS, and a corresponding Datadog user to access the database, mount a /conf.d/mysql.yaml file in the Cluster Agent container with the following content:

cluster_check: true
init_config:
instances:
    - server: "<PRIVATE_IP_ADDRESS>"
      port: 3306
      user: datadog
      pass: "<YOUR_CHOSEN_PASSWORD>"

Example: HTTP_Check on an external URL

If there is a URL you would like to perform an HTTP check against once per cluster, mount a /conf.d/http_check.yaml file in the Cluster Agent container with the following content:

cluster_check: true
init_config:
instances:
    - name: "<EXAMPLE_NAME>"
      url: "<EXAMPLE_URL>"

Example: HTTP_Check on a Kubernetes service

If there is a Kubernetes service you would like the to perform an HTTP check against once per cluster:

#(...)
clusterAgent:
  confd:
    http_check.yaml: |-
      advanced_ad_identifiers:
        - kube_service:
            name: "<SERVICE_NAME>"
            namespace: "<SERVICE_NAMESPACE>"
      cluster_check: true
      init_config:
      instances:
        - url: "http://%%host%%"
          name: "<EXAMPLE_NAME>"      

spec:
#(...)
  override:
    clusterAgent:
      extraConfd:
        configDataMap:
          http_check.yaml: |-
            advanced_ad_identifiers:
              - kube_service:
                  name: "<SERVICE_NAME>"
                  namespace: "<SERVICE_NAMESPACE>"
            cluster_check: true
            init_config:
            instances:
              - url: "http://%%host%%"
                name: "<EXAMPLE_NAME>"            

advanced_ad_identifiers:
  - kube_service:
      name: "<SERVICE_NAME>"
      namespace: "<SERVICE_NAMESPACE>"
cluster_check: true
init_config:
instances:
  - url: "http://%%host%%"
    name: "<EXAMPLE_NAME>"

Note: The field advanced_ad_identifiers is supported in Datadog Cluster Agent v1.18+.

Configuration from Kubernetes service annotations

ad.datadoghq.com/service.checks: |
  {
    "<INTEGRATION_NAME>": {
      "init_config": <INIT_CONFIG>,
      "instances": [<INSTANCE_CONFIG>]
    }
  }  

apiVersion: v1
kind: Service
metadata:
    name: my-nginx
    labels:
        run: my-nginx
        tags.datadoghq.com/env: "prod"
        tags.datadoghq.com/service: "my-nginx"
        tags.datadoghq.com/version: "1.19.0"
    annotations:
      ad.datadoghq.com/service.checks: |
        {
          "http_check": {
            "init_config": {},
            "instances": [
              {
                "url":"http://%%host%%",
                "name":"My Nginx",
                "timeout":1
              }
            ]
          }
        }        
spec:
    ports:
        - port: 80
          protocol: TCP
    selector:
        run: my-nginx

ad.datadoghq.com/service.check_names: '[<INTEGRATION_NAME>]'
ad.datadoghq.com/service.init_configs: '[<INIT_CONFIG>]'
ad.datadoghq.com/service.instances: '[<INSTANCE_CONFIG>]'

apiVersion: v1
kind: Service
metadata:
    name: my-nginx
    labels:
        run: my-nginx
        tags.datadoghq.com/env: "prod"
        tags.datadoghq.com/service: "my-nginx"
        tags.datadoghq.com/version: "1.19.0"
    annotations:
        ad.datadoghq.com/service.check_names: '["http_check"]'
        ad.datadoghq.com/service.init_configs: '[{}]'
        ad.datadoghq.com/service.instances: |
            [
              {
                "name": "My Nginx",
                "url": "http://%%host%%",
                "timeout": 1
              }
            ]            
spec:
    ports:
        - port: 80
          protocol: TCP
    selector:
        run: my-nginx

Validation

The Datadog Cluster Agent dispatches each cluster check to a node Agent to run. Run the Datadog Cluster Agent’s clusterchecks subcommand and look for the check name under the node Agent’s hostname:

# kubectl exec <CLUSTER_AGENT_POD_NAME> agent clusterchecks
(...)
===== Checks on default-pool-bce5cd34-ttw6.c.sandbox.internal =====

=== http_check check ===
Source: kubernetes-services
Instance ID: http_check:My service:5b948dee172af830
empty_default_hostname: true
name: My service
tags:
- kube_namespace:default
- kube_service:my-nginx
- cluster_name:example
timeout: 1
url: http://10.15.246.109
~
Init Config:
{}
===

Now, run the node Agent’s status subcommand and look for the check name under the Checks section.

# kubectl exec <NODE_AGENT_POD_NAME> agent status
...
    http_check (3.1.1)
    ------------------
      Instance ID: http_check:My service:5b948dee172af830 [OK]
      Total Runs: 234
      Metric Samples: Last Run: 3, Total: 702
      Events: Last Run: 0, Total: 0
      Service Checks: Last Run: 1, Total: 234
      Average Execution Time : 90ms

Further Reading

Documentation, liens et articles supplémentaires utiles:

Datadog Cluster AgentDOCUMENTATION Troubleshooting Cluster ChecksDOCUMENTATION Cluster Check RunnersDOCUMENTATION