Build and Test AIDE Database

Esta página aún no está disponible en español. Estamos trabajando en su traducción.
Si tiene alguna pregunta o comentario sobre nuestro proyecto de traducción actual, ¡no dude en contactarnos!

Description

Run the following command to generate a new database:

$ sudo aideinit

By default, the database will be written to the file /var/lib/aide/aide.db.new. Storing the database, the configuration file /etc/aide.conf, and the binary /usr/bin/aide (or hashes of these files), in a secure location (such as on read-only media) provides additional assurance about their integrity. The newly-generated database can be installed as follows:

$ sudo cp /var/lib/aide/aide.db.new /var/lib/aide/aide.db

To initiate a manual check, run the following command:

$ sudo /usr/bin/aide --check

If this check produces any unexpected output, investigate.

Rationale

For AIDE to be effective, an initial database of “known-good” information about files must be captured and it should be able to be verified against the installed files.

Remediation

Shell script

The following script can be run on the host to remediate the issue.

#!/bin/bash

# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}' 'linux-base' 2>/dev/null | grep -q '^installed$'; then

DEBIAN_FRONTEND=noninteractive apt-get -o DPkg::Lock::Timeout=60 install -y "aide"

AIDE_CONFIG=/etc/aide/aide.conf
DEFAULT_DB_PATH=/var/lib/aide/aide.db

# Fix db path in the config file, if necessary

if ! grep -q '^database=file:' ${AIDE_CONFIG}; then
    # replace_or_append gets confused by 'database=file' as a key, so should not be used.
    #replace_or_append "${AIDE_CONFIG}" '^database=file' "${DEFAULT_DB_PATH}" '@CCENUM@' '%s:%s'
    echo "database=file:${DEFAULT_DB_PATH}" >> ${AIDE_CONFIG}
fi


# Fix db out path in the config file, if necessary
if ! grep -q '^database_out=file:' ${AIDE_CONFIG}; then
    echo "database_out=file:${DEFAULT_DB_PATH}.new" >> ${AIDE_CONFIG}
fi

/usr/sbin/aideinit -y -f

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Ansible playbook

The following playbook can be run with Ansible to remediate the issue.

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-22-651015
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Ensure AIDE Is Installed
  ansible.builtin.apt:
    name: aide
    state: present
  when: '"linux-base" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-22-651015
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Check if DB Path in /etc/aide/aide.conf Is
    Already Set
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    regexp: ^#?(\s*)(database=)(.*)$
    state: absent
  check_mode: true
  changed_when: false
  register: database_replace
  when: '"linux-base" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-22-651015
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Check if DB Out Path in /etc/aide/aide.conf
    Is Already Set
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    regexp: ^#?(\s*)(database_out=)(.*)$
    state: absent
  check_mode: true
  changed_when: false
  register: database_out_replace
  when: '"linux-base" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-22-651015
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Fix DB Path in Config File if Necessary
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    regexp: ^#?(\s*)(database)(\s*)=(\s*)(.*)$
    line: \2\3=\4file:/var/lib/aide/aide.db
    backrefs: true
  when:
  - '"linux-base" in ansible_facts.packages'
  - database_replace.found > 0
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-22-651015
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Fix DB Out Path in Config File if Necessary
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    regexp: ^#?(\s*)(database_out)(\s*)=(\s*)(.*)$
    line: \2\3=\4file:/var/lib/aide/aide.db.new
    backrefs: true
  when:
  - '"linux-base" in ansible_facts.packages'
  - database_out_replace.found > 0
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-22-651015
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Ensure the Default DB Path is Added
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    line: database=file:/var/lib/aide/aide.db
    create: true
    mode: 420
  when:
  - '"linux-base" in ansible_facts.packages'
  - database_replace.found == 0
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-22-651015
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Ensure the Default Out Path is Added
  ansible.builtin.lineinfile:
    path: /etc/aide/aide.conf
    line: database_out=file:/var/lib/aide/aide.db.new
    create: true
    mode: 420
  when:
  - '"linux-base" in ansible_facts.packages'
  - database_out_replace.found == 0
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-22-651015
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database - Build and Test AIDE Database
  ansible.builtin.command: /usr/sbin/aideinit -y -f
  when: '"linux-base" in ansible_facts.packages'
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-22-651015
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Warning

In Ubuntu 22.04 Image Mode (bootc) systems, the AIDE database must be regenerated after each system update. Image Mode systems receive updates through new container images that may include modified files. After applying system updates, run the following commands to regenerate the AIDE database:

$ sudo /usr/bin/aide --init

Then replace the existing database:

$ sudo cp /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz

Failure to regenerate the AIDE database after updates will result in false positive alerts for legitimate system changes introduced by the update process.