Este producto no es compatible con el
sitio Datadog seleccionado. (
).
aws_dynamodb_backup
account_id
Type: STRING
backup_details
Type: STRUCT
Provider name: BackupDetails
Description: Contains the details of the backup created for the table.
backup_arn
Type: STRING
Provider name: BackupArn
Description: ARN associated with the backup.
backup_creation_date_time
Type: TIMESTAMP
Provider name: BackupCreationDateTime
Description: Time at which the backup was created. This is the request time of the backup.
backup_expiry_date_time
Type: TIMESTAMP
Provider name: BackupExpiryDateTime
Description: Time at which the automatic on-demand backup created by DynamoDB will expire. This SYSTEM on-demand backup expires automatically 35 days after its creation.
backup_name
Type: STRING
Provider name: BackupName
Description: Name of the requested backup.
backup_size_bytes
Type: INT64
Provider name: BackupSizeBytes
Description: Size of the backup in bytes. DynamoDB updates this value approximately every six hours. Recent changes might not be reflected in this value.
backup_status
Type: STRING
Provider name: BackupStatus
Description: Backup can be in one of the following states: CREATING, ACTIVE, DELETED.
backup_type
Type: STRING
Provider name: BackupType
Description: BackupType:USER - You create and manage these using the on-demand backup feature.SYSTEM - If you delete a table with point-in-time recovery enabled, a SYSTEM backup is automatically created and is retained for 35 days (at no additional cost). System backups allow you to restore the deleted table to the state it was in just before the point of deletion.AWS_BACKUP - On-demand backup created by you from Backup service.
source_table_details
Type: STRUCT
Provider name: SourceTableDetails
Description: Contains the details of the table when the backup was created.
billing_mode
Type: STRING
Provider name: BillingMode
Description: Controls how you are charged for read and write throughput and how you manage capacity. This setting can be changed later.PROVISIONED - Sets the read/write capacity mode to PROVISIONED. We recommend using PROVISIONED for predictable workloads.PAY_PER_REQUEST - Sets the read/write capacity mode to PAY_PER_REQUEST. We recommend using PAY_PER_REQUEST for unpredictable workloads.
item_count
Type: INT64
Provider name: ItemCount
Description: Number of items in the table. Note that this is an approximate value.
key_schema
Type: UNORDERED_LIST_STRUCT
Provider name: KeySchema
Description: Schema of the table.
attribute_name
Type: STRING
Provider name: AttributeName
Description: The name of a key attribute.
key_type
Type: STRING
Provider name: KeyType
Description: The role that this key attribute will assume:HASH - partition keyRANGE - sort key
The partition key of an item is also known as its hash attribute. The term “hash attribute” derives from DynamoDB’s usage of an internal hash function to evenly distribute data items across partitions, based on their partition key values. The sort key of an item is also known as its range attribute. The term “range attribute” derives from the way DynamoDB stores items with the same partition key physically close together, in sorted order by the sort key value.
on_demand_throughput
Type: STRUCT
Provider name: OnDemandThroughput
max_read_request_units
Type: INT64
Provider name: MaxReadRequestUnits
Description: Maximum number of read request units for the specified table. To specify a maximum OnDemandThroughput on your table, set the value of MaxReadRequestUnits as greater than or equal to 1. To remove the maximum OnDemandThroughput that is currently set on your table, set the value of MaxReadRequestUnits to -1.
max_write_request_units
Type: INT64
Provider name: MaxWriteRequestUnits
Description: Maximum number of write request units for the specified table. To specify a maximum OnDemandThroughput on your table, set the value of MaxWriteRequestUnits as greater than or equal to 1. To remove the maximum OnDemandThroughput that is currently set on your table, set the value of MaxWriteRequestUnits to -1.
provisioned_throughput
Type: STRUCT
Provider name: ProvisionedThroughput
Description: Read IOPs and Write IOPS on the table when the backup was created.
read_capacity_units
Type: INT64
Provider name: ReadCapacityUnits
Description: The maximum number of strongly consistent reads consumed per second before DynamoDB returns a ThrottlingException. For more information, see Specifying Read and Write Requirements in the Amazon DynamoDB Developer Guide. If read/write capacity mode is PAY_PER_REQUEST the value is set to 0.
write_capacity_units
Type: INT64
Provider name: WriteCapacityUnits
Description: The maximum number of writes consumed per second before DynamoDB returns a ThrottlingException. For more information, see Specifying Read and Write Requirements in the Amazon DynamoDB Developer Guide. If read/write capacity mode is PAY_PER_REQUEST the value is set to 0.
table_arn
Type: STRING
Provider name: TableArn
Description: ARN of the table for which backup was created.
table_creation_date_time
Type: TIMESTAMP
Provider name: TableCreationDateTime
Description: Time when the source table was created.
table_id
Type: STRING
Provider name: TableId
Description: Unique identifier for the table for which the backup was created.
table_name
Type: STRING
Provider name: TableName
Description: The name of the table for which the backup was created.
table_size_bytes
Type: INT64
Provider name: TableSizeBytes
Description: Size of the table in bytes. Note that this is an approximate value.
source_table_feature_details
Type: STRUCT
Provider name: SourceTableFeatureDetails
Description: Contains the details of the features enabled on the table when the backup was created. For example, LSIs, GSIs, streams, TTL.
global_secondary_indexes
Type: UNORDERED_LIST_STRUCT
Provider name: GlobalSecondaryIndexes
Description: Represents the GSI properties for the table when the backup was created. It includes the IndexName, KeySchema, Projection, and ProvisionedThroughput for the GSIs on the table at the time of backup.
index_name
Type: STRING
Provider name: IndexName
Description: The name of the global secondary index.
key_schema
Type: UNORDERED_LIST_STRUCT
Provider name: KeySchema
Description: The complete key schema for a global secondary index, which consists of one or more pairs of attribute names and key types:HASH - partition keyRANGE - sort key
The partition key of an item is also known as its hash attribute. The term “hash attribute” derives from DynamoDB’s usage of an internal hash function to evenly distribute data items across partitions, based on their partition key values. The sort key of an item is also known as its range attribute. The term “range attribute” derives from the way DynamoDB stores items with the same partition key physically close together, in sorted order by the sort key value.
attribute_name
Type: STRING
Provider name: AttributeName
Description: The name of a key attribute.
key_type
Type: STRING
Provider name: KeyType
Description: The role that this key attribute will assume:HASH - partition keyRANGE - sort key
The partition key of an item is also known as its hash attribute. The term “hash attribute” derives from DynamoDB’s usage of an internal hash function to evenly distribute data items across partitions, based on their partition key values. The sort key of an item is also known as its range attribute. The term “range attribute” derives from the way DynamoDB stores items with the same partition key physically close together, in sorted order by the sort key value.
on_demand_throughput
Type: STRUCT
Provider name: OnDemandThroughput
max_read_request_units
Type: INT64
Provider name: MaxReadRequestUnits
Description: Maximum number of read request units for the specified table. To specify a maximum OnDemandThroughput on your table, set the value of MaxReadRequestUnits as greater than or equal to 1. To remove the maximum OnDemandThroughput that is currently set on your table, set the value of MaxReadRequestUnits to -1.
max_write_request_units
Type: INT64
Provider name: MaxWriteRequestUnits
Description: Maximum number of write request units for the specified table. To specify a maximum OnDemandThroughput on your table, set the value of MaxWriteRequestUnits as greater than or equal to 1. To remove the maximum OnDemandThroughput that is currently set on your table, set the value of MaxWriteRequestUnits to -1.
projection
Type: STRUCT
Provider name: Projection
Description: Represents attributes that are copied (projected) from the table into the global secondary index. These are in addition to the primary key attributes and index key attributes, which are automatically projected.
non_key_attributes
Type: UNORDERED_LIST_STRING
Provider name: NonKeyAttributes
Description: Represents the non-key attribute names which will be projected into the index. For global and local secondary indexes, the total count of NonKeyAttributes summed across all of the secondary indexes, must not exceed 100. If you project the same attribute into two different indexes, this counts as two distinct attributes when determining the total. This limit only applies when you specify the ProjectionType of INCLUDE. You still can specify the ProjectionType of ALL to project all attributes from the source table, even if the table has more than 100 attributes.
projection_type
Type: STRING
Provider name: ProjectionType
Description: The set of attributes that are projected into the index:KEYS_ONLY - Only the index and primary keys are projected into the index.INCLUDE - In addition to the attributes described in KEYS_ONLY, the secondary index will include other non-key attributes that you specify.ALL - All of the table attributes are projected into the index.
When using the DynamoDB console, ALL is selected by default.
provisioned_throughput
Type: STRUCT
Provider name: ProvisionedThroughput
Description: Represents the provisioned throughput settings for the specified global secondary index.
read_capacity_units
Type: INT64
Provider name: ReadCapacityUnits
Description: The maximum number of strongly consistent reads consumed per second before DynamoDB returns a ThrottlingException. For more information, see Specifying Read and Write Requirements in the Amazon DynamoDB Developer Guide. If read/write capacity mode is PAY_PER_REQUEST the value is set to 0.
write_capacity_units
Type: INT64
Provider name: WriteCapacityUnits
Description: The maximum number of writes consumed per second before DynamoDB returns a ThrottlingException. For more information, see Specifying Read and Write Requirements in the Amazon DynamoDB Developer Guide. If read/write capacity mode is PAY_PER_REQUEST the value is set to 0.
local_secondary_indexes
Type: UNORDERED_LIST_STRUCT
Provider name: LocalSecondaryIndexes
Description: Represents the LSI properties for the table when the backup was created. It includes the IndexName, KeySchema and Projection for the LSIs on the table at the time of backup.
index_name
Type: STRING
Provider name: IndexName
Description: Represents the name of the local secondary index.
key_schema
Type: UNORDERED_LIST_STRUCT
Provider name: KeySchema
Description: The complete key schema for a local secondary index, which consists of one or more pairs of attribute names and key types:HASH - partition keyRANGE - sort key
The partition key of an item is also known as its hash attribute. The term “hash attribute” derives from DynamoDB’s usage of an internal hash function to evenly distribute data items across partitions, based on their partition key values. The sort key of an item is also known as its range attribute. The term “range attribute” derives from the way DynamoDB stores items with the same partition key physically close together, in sorted order by the sort key value.
attribute_name
Type: STRING
Provider name: AttributeName
Description: The name of a key attribute.
key_type
Type: STRING
Provider name: KeyType
Description: The role that this key attribute will assume:HASH - partition keyRANGE - sort key
The partition key of an item is also known as its hash attribute. The term “hash attribute” derives from DynamoDB’s usage of an internal hash function to evenly distribute data items across partitions, based on their partition key values. The sort key of an item is also known as its range attribute. The term “range attribute” derives from the way DynamoDB stores items with the same partition key physically close together, in sorted order by the sort key value.
projection
Type: STRUCT
Provider name: Projection
Description: Represents attributes that are copied (projected) from the table into the global secondary index. These are in addition to the primary key attributes and index key attributes, which are automatically projected.
non_key_attributes
Type: UNORDERED_LIST_STRING
Provider name: NonKeyAttributes
Description: Represents the non-key attribute names which will be projected into the index. For global and local secondary indexes, the total count of NonKeyAttributes summed across all of the secondary indexes, must not exceed 100. If you project the same attribute into two different indexes, this counts as two distinct attributes when determining the total. This limit only applies when you specify the ProjectionType of INCLUDE. You still can specify the ProjectionType of ALL to project all attributes from the source table, even if the table has more than 100 attributes.
projection_type
Type: STRING
Provider name: ProjectionType
Description: The set of attributes that are projected into the index:KEYS_ONLY - Only the index and primary keys are projected into the index.INCLUDE - In addition to the attributes described in KEYS_ONLY, the secondary index will include other non-key attributes that you specify.ALL - All of the table attributes are projected into the index.
When using the DynamoDB console, ALL is selected by default.
sse_description
Type: STRUCT
Provider name: SSEDescription
Description: The description of the server-side encryption status on the table when the backup was created.
inaccessible_encryption_date_time
Type: TIMESTAMP
Provider name: InaccessibleEncryptionDateTime
Description: Indicates the time, in UNIX epoch date format, when DynamoDB detected that the table’s KMS key was inaccessible. This attribute will automatically be cleared when DynamoDB detects that the table’s KMS key is accessible again. DynamoDB will initiate the table archival process when table’s KMS key remains inaccessible for more than seven days from this date.
kms_master_key_arn
Type: STRING
Provider name: KMSMasterKeyArn
Description: The KMS key ARN used for the KMS encryption.
sse_type
Type: STRING
Provider name: SSEType
Description: Server-side encryption type. The only supported value is:KMS - Server-side encryption that uses Key Management Service. The key is stored in your account and is managed by KMS (KMS charges apply).
status
Type: STRING
Provider name: Status
Description: Represents the current state of server-side encryption. The only supported values are:ENABLED - Server-side encryption is enabled.UPDATING - Server-side encryption is being updated.
stream_description
Type: STRUCT
Provider name: StreamDescription
Description: Stream settings on the table when the backup was created.
stream_enabled
Type: BOOLEAN
Provider name: StreamEnabled
Description: Indicates whether DynamoDB Streams is enabled (true) or disabled (false) on the table.
stream_view_type
Type: STRING
Provider name: StreamViewType
Description: When an item in the table is modified, StreamViewType determines what information is written to the stream for this table. Valid values for StreamViewType are:KEYS_ONLY - Only the key attributes of the modified item are written to the stream.NEW_IMAGE - The entire item, as it appears after it was modified, is written to the stream.OLD_IMAGE - The entire item, as it appeared before it was modified, is written to the stream.NEW_AND_OLD_IMAGES - Both the new and the old item images of the item are written to the stream.
time_to_live_description
Type: STRUCT
Provider name: TimeToLiveDescription
Description: Time to Live settings on the table when the backup was created.
attribute_name
Type: STRING
Provider name: AttributeName
Description: The name of the TTL attribute for items in the table.
time_to_live_status
Type: STRING
Provider name: TimeToLiveStatus
Description: The TTL status for the table.
Type: UNORDERED_LIST_STRING
